Currently those are used in some routines side by side with underlying functions with no apparent reason for it. Make their usage uniform, this cleans up code a bit and allows to remove unneeded variables. Signed-off-by: Denis Orlov <denorl2009@xxxxxxxxx> --- drivers/ata/ahci.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 3c0b0a5450..ad9e2f950f 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -172,7 +172,7 @@ static int ahci_io(struct ahci_port *ahci_port, u8 *fis, int fis_len, void *rbuf ahci_port_write_f(ahci_port, PORT_CMD_ISSUE, 1); ret = wait_on_timeout(WAIT_DATAIO, - (readl(ahci_port->port_mmio + PORT_CMD_ISSUE) & 0x1) == 0); + (ahci_port_read(ahci_port, PORT_CMD_ISSUE) & 0x1) == 0); if (ret) return -ETIMEDOUT; @@ -274,12 +274,9 @@ static int ahci_write(struct ata_port *ata, const void *buf, sector_t block, static int ahci_init_port(struct ahci_port *ahci_port) { - void __iomem *port_mmio; u32 val, cmd; int ret; - port_mmio = ahci_port->port_mmio; - /* make sure port is not active */ val = ahci_port_read(ahci_port, PORT_CMD); if (val & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | PORT_CMD_FIS_RX | PORT_CMD_START)) { @@ -375,16 +372,16 @@ static int ahci_init_port(struct ahci_port *ahci_port) ahci_port_info(ahci_port, "Spinning up device...\n"); ret = wait_on_timeout(WAIT_SPINUP, - ((readl(port_mmio + PORT_TFDATA) & + ((ahci_port_read(ahci_port, PORT_TFDATA) & (ATA_STATUS_BUSY | ATA_STATUS_DRQ)) == 0) - || ((readl(port_mmio + PORT_SCR_STAT) & 0xf) == 1)); + || ((ahci_port_read(ahci_port, PORT_SCR_STAT) & 0xf) == 1)); if (ret) { ahci_port_info(ahci_port, "timeout.\n"); ret = -ENODEV; goto err_init; } - if ((readl(port_mmio + PORT_SCR_STAT) & 0xf) == 1) { + if ((ahci_port_read(ahci_port, PORT_SCR_STAT) & 0xf) == 1) { ahci_port_info(ahci_port, "down.\n"); ret = -ENODEV; goto err_init; @@ -570,7 +567,6 @@ static int ahci_detect(struct device_d *dev) int ahci_add_host(struct ahci_device *ahci) { - u8 *mmio = (u8 *)ahci->mmio_base; u32 tmp, cap_save; int i, ret; @@ -584,7 +580,7 @@ int ahci_add_host(struct ahci_device *ahci) ahci_debug(ahci, "ahci_host_init: start\n"); - cap_save = readl(mmio + HOST_CAP); + cap_save = ahci_ioread(ahci, HOST_CAP); cap_save &= ((1 << 28) | (1 << 17)); cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */ @@ -597,7 +593,7 @@ int ahci_add_host(struct ahci_device *ahci) * reset must complete within 1 second, or * the hardware should be considered fried. */ - ret = wait_on_timeout(SECOND, (readl(mmio + HOST_CTL) & HOST_RESET) == 0); + ret = wait_on_timeout(SECOND, (ahci_ioread(ahci, HOST_CTL) & HOST_RESET) == 0); if (ret) { ahci_debug(ahci,"controller reset failed (0x%x)\n", tmp); return -ENODEV; @@ -620,7 +616,7 @@ int ahci_add_host(struct ahci_device *ahci) ahci_port->num = i; ahci_port->ahci = ahci; ahci_port->ata.dev = ahci->dev; - ahci_port->port_mmio = ahci_port_base(mmio, i); + ahci_port->port_mmio = ahci_port_base(ahci->mmio_base, i); ahci_port->ata.ops = &ahci_ops; ata_port_register(&ahci_port->ata); } -- 2.20.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox