When the videocore first-stage bootloader finds 'dtoverlay=disable-bt' in the
'config.txt', asides from applying said overlay, it also disables fixed
clock for the vpu, which miniuart requires to calculate correct baudrate,
rendering it non-functional. This can be fixed by adding 'core_freq=250'
to the config, but since barebox has drivers for the pl011 full-fledged UART,
lets just make barebox use it instead.
Signed-off-by: Daniel Brát <danek.brat@xxxxxxxxx>
---
arch/arm/dts/bcm2711-rpi-4.dts | 8 +-------
arch/arm/dts/bcm2837-rpi-3.dts | 2 ++
arch/arm/dts/rpi-use-pl011-uart.dtsi | 24 ++++++++++++++++++++++++
3 files changed, 27 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/dts/rpi-use-pl011-uart.dtsi
diff --git a/arch/arm/dts/bcm2711-rpi-4.dts b/arch/arm/dts/bcm2711-rpi-4.dts
index 3c0caa73f..e082ad868 100644
--- a/arch/arm/dts/bcm2711-rpi-4.dts
+++ b/arch/arm/dts/bcm2711-rpi-4.dts
@@ -9,10 +9,4 @@
status = "disabled";
};
-&uart1 {
- /* VPU core clock is reported at 200MHz, but needs to be 500Mhz
- * for ns16550 driver to set correct baudrate. Until that's
- * figured out, hardcode clock frequency to the expected value
- */
- clock-frequency = <500000000>;
-};
+#include "rpi-use-pl011-uart.dtsi"
diff --git a/arch/arm/dts/bcm2837-rpi-3.dts b/arch/arm/dts/bcm2837-rpi-3.dts
index e82d518fa..6af9e9d7c 100644
--- a/arch/arm/dts/bcm2837-rpi-3.dts
+++ b/arch/arm/dts/bcm2837-rpi-3.dts
@@ -7,3 +7,5 @@
&sdhci {
status = "disabled";
};
+
+#include "rpi-use-pl011-uart.dtsi"
diff --git a/arch/arm/dts/rpi-use-pl011-uart.dtsi b/arch/arm/dts/rpi-use-pl011-uart.dtsi
new file mode 100644
index 000000000..7c75b07f8
--- /dev/null
+++ b/arch/arm/dts/rpi-use-pl011-uart.dtsi
@@ -0,0 +1,24 @@
+/* https://www.raspberrypi.com/documentation/computers/configuration.html#primary-and-secondary-uart */
+
+/* Makes barebox use pl011 uart as primary */
+
+&uart1 {
+ status = "disabled";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
+
+/delete-node/ &bt;
+
+&{/aliases} {
+ serial0 = &uart0;
+ serial1 = &uart1;
+};
+
+&{/chosen} {
+ stdout-path = "/serial0:115200n8";
+};
--
2.17.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
