Linux USB Users

• Thread Index

• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• USB2.0 - low-speed USB audio interface?
  • From: POD69@xxxxxxx
• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 078/220] usb: musb: handle irqs in the order dictated by programming guide
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 15/15] usb: musb: handle irqs in the order dictated by programming guide
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: Maulik Mankad <x0082077@xxxxxx>
• Re: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 0/8] Several improvements to USB gadgets
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Steve McKown <rsmckown@xxxxxxxxx>
• [PATCH v4 1/1] xHCI: Supporting MSI/MSI-X
  • From: Dong Nguyen <Dong.Nguyen@xxxxxxx>
• [PATCH v4 0/1] xHCI: Supporting MSI/MSI-X
  • From: Dong Nguyen <Dong.Nguyen@xxxxxxx>
• Re: [PATCH 1/4] powerpc/fsl_soc.c: prepare for addition of mpc5121 USB code
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [PATCH] USB: mos7840: fix null-pointer dereference
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH 20/45] usb: musb: Fix compile error for omaps for musb_hdrc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Logitech harmony: lsusb shows bNumConfigurations==0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: "R. Steve McKown" <smckown@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: s3c_hsotg: Add support for external USB clock
  • From: Maurus Cuelenaere <mcuelenaere@xxxxxxxxx>
• Re: [PATCH 2/2] USB: s3c_hsotg: define USB_GADGET_DUALSPEED in Kconfig
  • From: Maurus Cuelenaere <mcuelenaere@xxxxxxxxx>
• Re: [PATCH 0/8] Several improvements to USB gadgets
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 20/45] usb: musb: Fix compile error for omaps for musb_hdrc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 20/45] usb: musb: Fix compile error for omaps for musb_hdrc
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 20/45] usb: musb: Fix compile error for omaps for musb_hdrc
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH] MUSB: make non-OMAP platforms build with CONFIG_PM=y
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 20/45] usb: musb: Fix compile error for omaps for musb_hdrc
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 159/220] usb: musb: Add context save and restore support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• drivers/usb/gadget/r8a66597-udc.h:139: warning: ‘data’ may be used uninitialized in this function
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• RE: [PATCH RESEND v5 0/3] ISOC supporting for xHCI
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• [PATCH v3 2/2]usb: musb: Dynamic dma channel allocation in gadget driver
  • From: HEMA HK <hemahk@xxxxxx>
• [PATCH v6 1/2] usb: musb: Unmapping the dma buffer when switching to PIO mode
  • From: HEMA HK <hemahk@xxxxxx>
• Re: [PATCH 0/8] Several improvements to USB gadgets
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• RE: [PATCH V5] usb: musb: Unmapping the dma buffer when switching to PIO mode
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• [PATCH 2/8] USB: gadget: f_mass_storage: fsg_add() renamed to fsg_bind_config()
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH 0/8] Several improvements to USB gadgets
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH 5/8] USB: gadget: f_fs: use usb_string_ids_n()
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH 3/8] USB: gadget: f_fs: functionfs_add() renamed to functionfs_bind_config()
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH 8/8] USB: gadget: g_multi: added documentation and INF files
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH 7/8] USB: gadget: g_multi: more configurable
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH 6/8] USB: gadget: g_multi: code clean up and refactoring
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH 4/8] USB: gadget: composite: usb_string_ids_*() functions added
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH 1/8] USB: gadget: g_mass_storage: static data instead of dynamic allocation
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH 19/37] drivers/net/usb: Use kmemdup
  • From: Petko Manolov <petkan@xxxxxxxxxxxxx>
• Re: [PATCH] iuu_phoenix.c update to support different baud rates.
  • From: James Courtier-Dutton <james.dutton@xxxxxxxxx>
• [PATCH 08/29] pcmcia: dev_node removal (drivers with updated printk call)
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 05/29] pcmcia: re-work pcmcia_request_irq()
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [USB-Storage Problem]:[USB3.0] The &quot;urb-&gt;complete( )&quot; can't be recalled after usb_submit_urb( )?
  • From: darian <darian@xxxxxxx>
• Re: [USB-Storage Problem]:[USB3.0] The &amp;quot;urb-&amp;gt;complete( )&amp;quot; can't be?recalled after usb_submit_urb( )?
  • From: darian <darian@xxxxxxx>
• Re: Logitech harmony: lsusb shows bNumConfigurations==0
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 7/7] echi-dbgp: Add kernel debugger support for the usb debug port
  • From: Jason Wessel <jason.wessel@xxxxxxxxxxxxx>
• [RFC] xhci: Set Mult field in endpoint context correctly.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/2] xhci: Fix check for room on the ring.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/2] xhci: Limit bus sg_tablesize to 62 TRBs.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Steve McKown <rsmckown@xxxxxxxxx>
• Re: [PATCH v3 1/1] xhci: supporting msi/msi-x
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 01/12] USB: safe_serial: reimplement write using generic framework
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 07/12] USB: io_ti: remove unsused private counter
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 08/12] USB: io_ti: use kfifo to implement write buffering
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 04/12] USB: aircable: fix incorrect write-buffer length
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 10/12] USB: kl5usb105: minor clean ups
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 06/12] USB: ti_usb: use kfifo to implement write buffering
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 09/12] USB: kl5usb105: fix memory leak
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 12/12] USB: ftdi_sio: fix legacy SIO-device header
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 11/12] USB: kl5usb105: reimplement using generic framework
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 05/12] USB: ir-usb: fix incorrect write-buffer length
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 03/12] USB: safe_serial: straighten out read processing
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 02/12] USB: safe_serial: reimplement read using generic framework
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 00/12] USB: serial: some fixes and clean ups
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH v3 1/1] xhci: supporting msi/msi-x
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Ron Madrid <ron_madrid@xxxxxxxxxxxxx>
• Re: [PATCH t2 1/2] usb-storage: trivial debug improvements
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH t2 1/2] usb-storage: trivial debug improvements
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [USB-Storage Problem]:[USB3.0] The "urb->complete( )" can't be recalled after usb_submit_urb( )?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [USB-Storage Problem]:[USB3.0] The &quot;urb-&gt;complete( )&quot; can't be?recalled after usb_submit_urb( )?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 1/1] xhci: supporting msi/msi-x
  • From: "Nguyen, Dong" <Dong.Nguyen@xxxxxxx>
• Re: Samsung LTE Wireless USB Modem
  • From: Brian Walsh <brian@xxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Steve McKown <rsmckown@xxxxxxxxx>
• Re: PROBLEM: conflicts with usbhid keyboard and ueagle-atm
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: conflicts with usbhid keyboard and ueagle-atm
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V5] usb: musb: Unmapping the dma buffer when switching to PIO mode
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/3] EHCI: EHCI 1.1 addendum: preparation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2]usb: musb: Dynamic dma channel allocation in gadget driver
  • From: Hema HK <hemahk@xxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• [PATCH V5] usb: musb: Unmapping the dma buffer when switching to PIO mode
  • From: Hema HK <hemahk@xxxxxx>
• Re: [USB-Storage Problem]:[USB3.0] The &quot;urb-&gt;complete( )&quot; can't be?recalled after usb_submit_urb( )?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 6/6 v2] musb: dma: use optimal transfer element for sdma
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• RE: [PATCH 3/3] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 6/6] musb: dma: use optimal transfer element for sdma
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 3/3] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 3/3] musb: AM35x: Workaround for fifo read issue
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 6/6] musb: dma: use optimal transfer element for sdma
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [Uclinux-dist-devel] [PATCH] USB: musb: set NAK limitation for control transfers
  • From: Cliff Cai <cliffcai.sh@xxxxxxxxx>
• Re: [PATCH 1/1] hidraw: Use Interrupt Endpoint for OUT Transfers if Available
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: i.MX EHCI initialization
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• RE: [Uclinux-dist-devel] [PATCH] USB: musb: set NAK limitation for control transfers
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [Uclinux-dist-devel] [PATCH] USB: musb: set NAK limitation for control transfers
  • From: Cliff Cai <cliffcai.sh@xxxxxxxxx>
• Re: [USB-Storage Problem]:[USB3.0] The &quot;urb-&gt;complete( )&quot; can't be recalled after usb_submit_urb( )?
  • From: darian <darian@xxxxxxx>
• Re: [PATCH 1/3] EHCI: EHCI 1.1 addendum: preparation
  • From: "Du, Alek" <alek.du@xxxxxxxxx>
• RE: [Uclinux-dist-devel] [PATCH] USB: musb: set NAK limitation for control transfers
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [Uclinux-dist-devel] [PATCH] USB: musb: set NAK limitation for control transfers
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: usb_submit_urb failed with value -22
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [USB-Storage Problem]:[USB3.0] The "urb->complete( )" can't be recalled after usb_submit_urb( )?
  • From: Greg KH <greg@xxxxxxxxx>
• [USB-Storage Problem]:[USB3.0] The "urb->complete( )" can't be recalled after usb_submit_urb( )?
  • From: darian <darian@xxxxxxx>
• RE: [Uclinux-dist-devel] [PATCH] USB: musb: set NAK limitation for control transfers
  • From: "Cai, Cliff" <Cliff.Cai@xxxxxxxxxx>
• RE: [PATCH RESEND v5 0/3] ISOC supporting for xHCI
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: "R. Steve McKown" <rsmckown@xxxxxxxxx>
• Re: [PATCH v3 1/1] xhci: supporting msi/msi-x
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH RESEND v5 0/3] ISOC supporting for xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: root FS on pendrive
  • From: maptex <maptex@xxxxxxxxx>
• Re: usb_submit_urb failed with value -22
  • From: Philip Tait <philip@xxxxxxxx>
• Re: AF9015 suspend problem
  • From: Jose Alberto Reguero <jareguero@xxxxxxxxxxxxxx>
• [PATCH 2/2] USB: s3c_hsotg: define USB_GADGET_DUALSPEED in Kconfig
  • From: Maurus Cuelenaere <mcuelenaere@xxxxxxxxx>
• [PATCH 1/2] USB: gadget: fix null pointer dereference on non-dual speed gadgets
  • From: Maurus Cuelenaere <mcuelenaere@xxxxxxxxx>
• Re: PROBLEM: conflicts with usbhid keyboard and ueagle-atm
  • From: Khanh-Dang Nguyen Thu Lam <kdntl@xxxxxxxx>
• Re: PROBLEM: conflicts with usbhid keyboard and ueagle-atm
  • From: Khanh-Dang Nguyen Thu Lam <kdntl@xxxxxxxx>
• Re: [PATCH 07/11] USB: visor: reimplement using generic framework
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 2/2] USB: s3c_hsotg: Add support for external USB clock
  • From: Maurus Cuelenaere <mcuelenaere@xxxxxxxxx>
• Re: FTDI chips - when ftdi_sio is wrong thing
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [2.6.34 PATCH] USB: option.c: OLIVETTI OLICARD100 support
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] USB: remove match_device
  • From: tom.leiming@xxxxxxxxx
• Re: PROBLEM: conflicts with usbhid keyboard and ueagle-atm
  • From: Khanh-Dang Nguyen Thu Lam <kdntl@xxxxxxxx>
• [2.6.34 PATCH] USB: option.c: OLIVETTI OLICARD100 support
  • From: Nils Radtke <lkml@xxxxxxxxxxxxxxx>
• Re: FTDI chips - when ftdi_sio is wrong thing
  • From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
• [PATCH 5/6] musb: gadget: fix tx transfer path for mode0 operation
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/6 v2] musb: use system DMA to fix Inventra DMA issue on RTL-1.4
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 4/6] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 3/6] musb: add function to check if Inventra DMA used
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/6] musb: save OTG base physical address
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 6/6] musb: dma: use optimal transfer element for sdma
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: PROBLEM: conflicts with usbhid keyboard and ueagle-atm
  • From: Khanh-Dang Nguyen Thu Lam <kdntl@xxxxxxxx>
• [PATCH 3/3] musb: AM35x: Workaround for fifo read issue
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/3 v3] AM35x: Add musb support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/3 v3] musb: add musb support for AM35x
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: i.MX EHCI initialization
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [PATCH V4] usb: musb: Unmapping the dma buffer when switching to PIO mode
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] USB: gadget: g_mass_storage: static data instead of dynamic allocation
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: uvc video/webcam gadget driver
  • From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
• i.MX EHCI initialization
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH V4] usb: musb: Unmapping the dma buffer when switching to PIO mode
  • From: Hema HK <hemahk@xxxxxx>
• RE: [PATCH RFC v8] MUSB: DA8xx/OMAP-L1x glue layer
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: root FS on pendrive
  • From: Greg KH <greg@xxxxxxxxx>
• Re: PROBLEM: conflicts with usbhid keyboard and ueagle-atm
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH t2 1/2] usb-storage: trivial debug improvements
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: FTDI chips - when ftdi_sio is wrong thing
  • From: Greg KH <greg@xxxxxxxxx>
• PROBLEM: conflicts with usbhid keyboard and ueagle-atm
  • From: Khanh-Dang Nguyen Thu Lam <kdntl@xxxxxxxx>
• FTDI chips - when ftdi_sio is wrong thing
  • From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
• [PATCH 1/1] hidraw: Use Interrupt Endpoint for OUT Transfers if Available
  • From: Alan Ott <alan@xxxxxxxxxxx>
• [PATCH t2 2/2] usb-storage: always print quirks
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH t2 1/2] usb-storage: trivial debug improvements
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH t2 0/2] usb-storage: generic logging improvements
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 5/5] USB: oti6858: use port write fifo
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 4/5] USB: oti6858: use kfifo to implement write buffering
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 3/5] USB: cypress_m8: use kfifo to implement write buffering
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 2/5] USB: cypress_m8: remove unused drain define
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 1/5] USB: usb_debug: set bulk out size at probe
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 0/5] USB: serial: driver clean ups
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: Remote wakeup from standby
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: root FS on pendrive
  • From: maptex <maptex@xxxxxxxxx>
• Re: [RFC PATCH 0/2] usb-storage: generic logging improvements
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 4/4] USB: musb: fix HOST or PERIPHERAL only mode(v3)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 4/4] USB: musb: fix HOST or PERIPHERAL only mode(v3)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH] USB: visor: increase bulk-out buffer size
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: root FS on pendrive
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC][PATCH] USB: fix usb_remove_store
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Remote wakeup from standby
  • From: Terence <ripperda@xxxxxxxxx>
• Re: [Uclinux-dist-devel] [PATCH] USB: musb: set NAK limitation for control transfers
  • From: Mike Frysinger <vapier.adi@xxxxxxxxx>
• Re: [RFC][PATCH] USB: fix usb_remove_store
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH 33/37] drivers/net/usb: Use kmemdup
  • From: Julia Lawall <julia@xxxxxxx>
• [PATCH 25/37] drivers/net/usb: Use kmemdup
  • From: Julia Lawall <julia@xxxxxxx>
• [PATCH 19/37] drivers/net/usb: Use kmemdup
  • From: Julia Lawall <julia@xxxxxxx>
• [PATCH 9/37] drivers/usb/gadget: Use kmemdup
  • From: Julia Lawall <julia@xxxxxxx>
• Re: [RFC][PATCH] USB: fix usb_remove_store
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• root FS on pendrive
  • From: maptex <maptex@xxxxxxxxx>
• [stable-2.6.33.4 PATCH] USB: option.c: OLIVETTI OLICARD100 support
  • From: Nils Radtke <lkml@xxxxxxxxxxxxxxx>
• [PATCH 03/11] USB: empeg: reimplement using generic framework
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 06/11] USB: visor: fix memory leak
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 07/11] USB: visor: reimplement using generic framework
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 04/11] USB: ipaq: reimplement using generic framework
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 10/11] USB: belkin_sa: clean up open
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 11/11] USB: belkin_sa: implement line status handling
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 05/11] USB: spcp8x5: reimplement using generic framework
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 09/11] USB: belkin_sa: minor clean-ups
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 02/11] USB: serial: add special case for processing of empty read urbs
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 08/11] USB: cp210x: use generic open to start reading from device
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 01/11] USB: kobil: fix memory leak
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 00/11] USB: serial: more serial patches
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: Too many printks leads to hang?
  • From: Leon Woestenberg <leon.woestenberg@xxxxxxxxx>
• [PATCH 1/1] [PATCH] CP210x New Device IDs 11 New device IDs added.
  • From: Craig Shelley <craig@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] usb-storage: generic logging improvements
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 2/2] musb: remove extra blank and border lines
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/2] musb: fix compilation warning in host only mode
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH] musb: host: release dma channels if no active io
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: [RFC][PATCH] USB: fix usb_remove_store
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC][PATCH] USB: fix usb_remove_store
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/3 v2] musb: add musb support for AM35x
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [RFC][PATCH] USB: fix usb_remove_store
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Too many printks leads to hang?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Ron Madrid <ron_madrid@xxxxxxxxxxxxx>
• Re: [PATCH] checkstack fix for isd200.c: isd200_srb_set_bufflen()
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] checkstack fix for isd200.c: isd200_srb_set_bufflen()
  • From: Prarit Bhargava <prarit@xxxxxxxxxx>
• Re: [PATCH] checkstack fix for isd200.c: isd200_srb_set_bufflen()
  • From: Prarit Bhargava <prarit@xxxxxxxxxx>
• Re: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Venkatraman S <svenkatr@xxxxxx>
• patch usb-ehci-fix-controller-wakeup-flag-settings-during-suspend.patch added to gregkh-2.6 tree
  • From: <gregkh@xxxxxxx>
• Re: [PATCH 1/3] EHCI: EHCI 1.1 addendum: preparation
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 3/4] USB: remove usb_find_device
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: gadget: g_mass_storage: static data instead of dynamic allocation
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] checkstack fix for isd200.c: isd200_srb_set_bufflen()
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/3 v2] musb: add musb support for AM35x
  • From: Venkatraman S <svenkatr@xxxxxxxxx>
• Re: [PATCH/RFC v2] xhci: Transfer ring link TRB activation change.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Greg KH <greg@xxxxxxxxx>
• Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Steve McKown <rsmckown@xxxxxxxxx>
• Re: [RFC][PATCH] USB: fix usb_remove_store
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Controlling a UVC Camera
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH v2] USB: FHCI: cq_get() should check kfifo_out()'s return value
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxx>
• Re: Anyone here with experience in ISP1504 (OTG Phy) and USB High Speed Host
  • From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
• RE: [PATCH RFC 2/2] usb: ehci-omap: add suspend/resume support
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [RFC][PATCH] USB: fix usb_remove_store
  • From: tom.leiming@xxxxxxxxx
• Possible memory leak: g_serial/ dma pool allocation in fsl_udc_core.c
  • From: Ole Reinhardt <ole.reinhardt@xxxxxxxxxxxxxx>
• [PATCH V3] usb: musb: Unmapping the dma buffer when switching to PIO mode
  • From: Hema HK <hemahk@xxxxxx>
• RE: [PATCH V2] usb: musb: Unmapping the dma buffer when switching to PIO mode
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Controlling a UVC Camera
  • From: David Miller <miller006@xxxxxxxxxxx>
• Re: Samsung LTE Wireless USB Modem
  • From: Brian Walsh <brian@xxxxxxxx>
• [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/3 v2] musb: add musb support for AM35x
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/3 v2] AM35x: Add musb support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• RE: [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH V2] usb: musb: Unmapping the dma buffer when switching to PIO mode
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: g_serial / fsl_udc_core: yet another BUG: scheduling while atomic
  • From: Ole Reinhardt <ole.reinhardt@xxxxxxxxxxxxxx>
• [PATCH V2] usb: musb: Unmapping the dma buffer when switching to PIO mode
  • From: HEMA HK <hemahk@xxxxxx>
• RE: musb: unmap the DMA buffer when switching to PIO mode
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• RE: [PATCH RFC v8] MUSB: DA8xx/OMAP-L1x glue layer
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH RFC v8] MUSB: DA8xx/OMAP-L1x glue layer
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Can I use usb composite device in linux
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: Samsung LTE Wireless USB Modem
  • From: Josua Dietze <digidietze@xxxxxxxxxxxxxxx>
• Can I use usb composite device in linux
  • From: 영문 박 <park712_2000@xxxxxxxxxxx>
• Re: Samsung LTE Wireless USB Modem
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: squeezing more transfers into one uframe
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH] USB: musb: set NAK limitation for control transfers
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: squeezing more transfers into one uframe
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: musb: unmap the DMA buffer when switching to PIO mode
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH RFC v8] MUSB: DA8xx/OMAP-L1x glue layer
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Samsung LTE Wireless USB Modem
  • From: Brian Walsh <brian@xxxxxxxx>
• RE: [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Pedro Ribeiro <pedrib@xxxxxxxxx>
• Re: AF9015 suspend problem
  • From: Greg KH <greg@xxxxxxxxx>
• Re: AF9015 suspend problem
  • From: Jose Alberto Reguero <jareguero@xxxxxxxxxxxxxx>
• Re: AF9015 suspend problem
  • From: Greg KH <greg@xxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Ron Madrid <ron_madrid@xxxxxxxxxxxxx>
• Re: [PATCH RESEND v5 0/3] ISOC supporting for xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• AF9015 suspend problem
  • From: Jose Alberto Reguero <jareguero@xxxxxxxxxxxxxx>
• [PATCH] USB: cp210x: remove redundant disconnect()
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: How to get SetFeature Response HID driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb_submit_urb failed with value -22
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb_submit_urb failed with value -22
  • From: Philip Tait <philip@xxxxxxxx>
• Re: How to get SetFeature Response HID driver
  • From: yoni dana <dana.yoni@xxxxxxxxx>
• [PATCH 7/20] drivers/usb/serial: Use kzalloc
  • From: Julia Lawall <julia@xxxxxxx>
• Re: [PATCH RFC 1/2] usb: ehci-omap: factor out clock handling
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: How to get SetFeature Response HID driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb_submit_urb failed with value -22
  • From: Greg KH <greg@xxxxxxxxx>
• Re: How to get SetFeature Response HID driver
  • From: yoni dana <dana.yoni@xxxxxxxxx>
• Re: [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: How to get SetFeature Response HID driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb_submit_urb failed with value -22
  • From: Philip Tait <philip@xxxxxxxx>
• [PATCH 3/3] USB: ipw: reimplement using generic framework
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 2/3] USB: ipw: remove dummy port_probe and port_remove
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 1/3] USB: ipw: clean up dtr-rts handling
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 0/3] USB: ipw: clean up and rewrite
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: How to get SetFeature Response HID driver
  • From: yoni dana <dana.yoni@xxxxxxxxx>
• Re: usb_submit_urb failed with value -22
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH RFC v8] MUSB: DA8xx/OMAP-L1x glue layer
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Ron Madrid <ron_madrid@xxxxxxxxxxxxx>
• Re: How to get SetFeature Response HID driver
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 4/4] USB: ir-usb: reimplement using generic framework
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 3/4] USB: ir-usb: fix set_termios race
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 2/4] USB: ir-usb: allow custom bulk buffer size without reallocation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 1/4] USB: ir-usb: fix double free
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 0/4] USB: ir-usb: bug fixes and improvements
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Rob Duncan <Robert.Duncan@xxxxxxxx>
• Re: System hangs when using USB 3.0 HD with on Ubuntu
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: g_mass_storage: static data instead of dynamic allocation
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Ron Madrid <ron_madrid@xxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] usb: ehci-omap: add suspend/resume support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Host controller shutdown behavior
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• Host controller shutdown behavior
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/2] usb-storage: Add new no_read_capacity_16 quirk
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/2] scsi/sd: Add a no_read_capacity_16 scsi_device flag
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH RFC 2/2] usb: ehci-omap: add suspend/resume support
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH RFC 1/2] usb: ehci-omap: factor out clock handling
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: How to get SetFeature Response HID driver
  • From: yoni dana <dana.yoni@xxxxxxxxx>
• Re: OTG implementation with external transceiver on PXA270
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2]usb: musb: Dynamic dma channel allocation in gadget driver
  • From: HEMA HK <hemahk@xxxxxx>
• usb: musb: Dynamic dma channel allocation in gadget driver
  • From: Hema HK <hemahk@xxxxxx>
• RE: [PATCH 2/5] musb: use system DMA to fix Inventra DMA issue on RTL-1.4
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• [PATCH 4/4 v4] xHCI: PCI power management implementation
  • From: Libin Yang <libin.yang@xxxxxxx>
• [PATCH 3/4 v4] xHCI: bus power management implementation
  • From: Libin Yang <libin.yang@xxxxxxx>
• [PATCH 2/4 v4] xHCI: port remote wakeup implementation
  • From: Libin Yang <libin.yang@xxxxxxx>
• [PATCH 1/4 v4] xHCI: port power management implementation
  • From: Libin Yang <libin.yang@xxxxxxx>
• [PATCH 0/4 v4] xhci: Supporting power management
  • From: Libin Yang <libin.yang@xxxxxxx>
• RE: [PATCH 2/5] musb: use system DMA to fix Inventra DMA issue on RTL-1.4
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Daniel Mack <daniel@xxxxxxxx>
• RE: [PATCH 2/5] musb: use system DMA to fix Inventra DMA issue on RTL-1.4
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Sumit <sumit.panchasara@xxxxxxxxxxxxxx>
• RE: [PATCH 2/5] musb: use system DMA to fix Inventra DMA issue on RTL-1.4
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: System hangs when using USB 3.0 HD with on Ubuntu
  • From: Mark Lord <mlord@xxxxxxxxx>
• [PATCH v3] USB: musb: suppress warning about unused flags
  • From: Jon Povey <jon.povey@xxxxxxxxxxxxxxx>
• usb_submit_urb failed with value -22
  • From: Philip Tait <philip@xxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Pedro Ribeiro <pedrib@xxxxxxxxx>
• [PATCH] checkstack fix for isd200.c: isd200_srb_set_bufflen()
  • From: Prarit Bhargava <prarit@xxxxxxxxxx>
• [PATCH] USB: EHCI: fix controller wakeup flag settings during suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: gadget: f_mass_storage: fix in error recovery
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH] USB: gadget: f_mass_storage: fix in error recovery
  • From: Greg KH <greg@xxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Ron Madrid <ron_madrid@xxxxxxxxxxxxx>
• RE: [PATCH RFC 4/5] omap: 3430sdp: add ohci platform init
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• Re: How to get SetFeature Response HID driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Greg KH <gregkh@xxxxxxx>
• g_serial and cdc_acm communications
  • From: Ron Madrid <ron_madrid@xxxxxxxxxxxxx>
• Re: System hangs when using USB 3.0 HD with on Ubuntu
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: OTG implementation with external transceiver on PXA270
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH RFC v8] MUSB: DA8xx/OMAP-L1x glue layer
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• RE: [PATCH 2/5] musb: use system DMA to fix Inventra DMA issue on RTL-1.4
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] musb: add function to check if Inventra DMA used
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] musb: use system DMA to fix Inventra DMA issue on RTL-1.4
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: g_serial / fsl_udc_core: yet another BUG: scheduling while atomic
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] USB: only check URB_SETUP_MAP_* flag for control endpoint
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCHv3] xhci:Remove the arbitrary limit of 15 xHCI ports
  • From: William Gulland <wgulland@xxxxxxxxxx>
• Re: [PATCH 1/4] USB: add missing "{}" in map_urb_for_dma
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: g_serial / fsl_udc_core: yet another BUG: scheduling while atomic
  • From: Ole Reinhardt <ole.reinhardt@xxxxxxxxxxxxxx>
• Re: g_serial / fsl_udc_core: yet another BUG: scheduling while atomic
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: g_serial / fsl_udc_core: yet another BUG: scheduling while atomic
  • From: Ole Reinhardt <ole.reinhardt@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] USB: musb: fix HOST or PERIPHERAL only mode(v3)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: g_serial / fsl_udc_core: yet another BUG: scheduling while atomic
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• Re: System hangs when using USB 3.0 HD with on Ubuntu
  • From: James Bottomley <James.Bottomley@xxxxxxx>
• [PATCH 4/4] USB: musb: fix HOST or PERIPHERAL only mode(v3)
  • From: tom.leiming@xxxxxxxxx
• [PATCH 3/4] USB: remove usb_find_device
  • From: tom.leiming@xxxxxxxxx
• [PATCH 2/4] USB: only check URB_SETUP_MAP_* flag for control endpoint
  • From: tom.leiming@xxxxxxxxx
• [PATCH 1/4] USB: add missing "{}" in map_urb_for_dma
  • From: tom.leiming@xxxxxxxxx
• g_serial / fsl_udc_core: yet another BUG: scheduling while atomic
  • From: Ole Reinhardt <ole.reinhardt@xxxxxxxxxxxxxx>
• g_serial / fsl_udc_core: yet another BUG: scheduling while atomic
  • From: Ole Reinhardt <ole.reinhardt@xxxxxxxxxxxxxx>
• Re: Use of start_frame in usbusx2yaudio.c
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• usb: musb: unmap the DMA buffer when switching to PIO mode
  • From: Hema HK <hemahk@xxxxxx>
• Re: System hangs when using USB 3.0 HD with on Ubuntu
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Use of start_frame in usbusx2yaudio.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: System hangs when using USB 3.0 HD with on Ubuntu
  • From: Mark Lord <mlord@xxxxxxxxx>
• Re: System hangs when using USB 3.0 HD with on Ubuntu
  • From: Mark Lord <mlord@xxxxxxxxx>
• Re: System hangs when using USB 3.0 HD with on Ubuntu
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 1/2] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/2] usb-storage: Add new no_read_disc_info quirk
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• RE: [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: System hangs when using USB 3.0 HD with on Ubuntu
  • From: Mark Lord <mlord@xxxxxxxxx>
• RE: [PATCH] USB: gadget: f_mass_storage: fix in error recovery
  • From: Viral Mehta <Viral.Mehta@xxxxxxxxxxxxxxx>
• [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/5] musb: use system DMA to fix Inventra DMA issue on RTL-1.4
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 5/5] musb: dma: use optimal transfer element for sdma
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 3/5] musb: add function to check if Inventra DMA used
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/5] musb: save OTG base physical address
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH] USB: gadget: f_mass_storage: fix in error recovery
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• RE: [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Viral Mehta <Viral.Mehta@xxxxxxxxxxxxxxx>
• RE: [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Viral Mehta <Viral.Mehta@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH v3 0/1] xhci: supporting msi/msi-x
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH v3 1/1] xhci: supporting msi/msi-x
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• RE: [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Viral Mehta <Viral.Mehta@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• RE: [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Viral Mehta <Viral.Mehta@xxxxxxxxxxxxxxx>
• RE: [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Viral Mehta <Viral.Mehta@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• RE: [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Viral Mehta <Viral.Mehta@xxxxxxxxxxxxxxx>
• [PATCH] USB: gadget: f_mass_storage: fix in fsg_common_init() error recovery
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• Re: [PATCH] xhci: Transfer ring link TRB activation change.
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• Use of start_frame in usbusx2yaudio.c
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• How to get SetFeature Response HID driver
  • From: yoni dana <dana.yoni@xxxxxxxxx>
• RE: [PATCHv2 2.6.34-rc7 2/3] mx5: change usb clock source from pll3 to pll2
  • From: "Nguyen Dinh-R00091" <R00091@xxxxxxxxxxxxx>
• patch usb-fix-u132-hcd-code-data-warning.patch added to gregkh-2.6 tree
  • From: <gregkh@xxxxxxx>
• patch usb-gadget-f_fs.c-needs-to-include-pagemap.h.patch added to gregkh-2.6 tree
  • From: <gregkh@xxxxxxx>
• Re: [PATCHv2 2.6.34-rc7 2/3] mx5: change usb clock source from pll3 to pll2
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCHv2] xhci:Remove the arbitratry limit of 15 xHCI ports
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb & nut logs
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• [PATCHv2] xhci:Remove the arbitratry limit of 15 xHCI ports
  • From: William Gulland <wgulland@xxxxxxxxxx>
• Re: Remote wakeup from standby
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Remote wakeup from standby
  • From: Rob Duncan <Robert.Duncan@xxxxxxxx>
• Re: usb & nut logs
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: squeezing more transfers into one uframe
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Pedro Ribeiro <pedrib@xxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: Anyone here with experience in ISP1504 (OTG Phy) and USB High Speed Host
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Pedro Ribeiro <pedrib@xxxxxxxxx>
• Anyone here with experience in ISP1504 (OTG Phy) and USB High Speed Host
  • From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
• RE: [linux-pm] [PATCH v2] [RFC] ehci: Disable wake on overcurrent (WKOC_E) and disconnect (WKDISC_E)
  • From: "Du, Alek" <alek.du@xxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [linux-pm] [PATCH v2] [RFC] ehci: Disable wake on overcurrent (WKOC_E) and disconnect (WKDISC_E)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: fix interface runtime-PM settings
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: System hangs when using USB 3.0 HD with on Ubuntu
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
• Re: [PATCH RESEND v5 0/3] ISOC supporting for xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
• Re: squeezing more transfers into one uframe
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• [PATCH 0/1 v2] mx31: Fix usb otg host initialisation
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• Re: Autosuspend and unbound interfaces
  • From: Rob Duncan <Robert.Duncan@xxxxxxxx>
• Re: [linux-pm] [PATCH v2] [RFC] ehci: Disable wake on overcurrent (WKOC_E) and disconnect (WKDISC_E)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Autosuspend and unbound interfaces
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• Re: [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• Re: [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• Re: [PATCH -next] gadget: f_fs.c needs to include pagemap.h
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Valentin Longchamp <valentin.longchamp@xxxxxxx>
• Re: [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Valentin Longchamp <valentin.longchamp@xxxxxxx>
• Re: g_serial: scheduling while atomic bug
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• [PATCH RESEND v5 3/3] xHCI: Isoc urb enqueue
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH RESEND v5 2/3] xHCI: isochronous transfer implementation
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH RESEND v5 1/3] xHCI: Introduce urb_priv structure
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH RESEND v5 0/3] ISOC supporting for xHCI
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 3/3] EHCI: EHCI 1.1 addendum: Enable Per-port change detect bits
  • From: "Du, Alek" <alek.du@xxxxxxxxx>
• [PATCH 2/3] EHCI: EHCI 1.1 addendum: Basic LPM feature support
  • From: "Du, Alek" <alek.du@xxxxxxxxx>
• [PATCH 1/3] EHCI: EHCI 1.1 addendum: preparation
  • From: "Du, Alek" <alek.du@xxxxxxxxx>
• Re: System hangs when using USB 3.0 HD with on Ubuntu
  • From: Jonas Schwertfeger <jschwertfeger@xxxxxxxxx>
• Re: [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• squeezing more transfers into one uframe
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: OTG implementation with external transceiver on PXA270
  • From: Eric Miao <eric.y.miao@xxxxxxxxx>
• Re: I have a question about usb composite device
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 0/3 v5] ISOC supporting for xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• I have a question about usb composite device
  • From: 영문 박 <park712_2000@xxxxxxxxxxx>
• usb & nut logs
  • From: James <bjlockie@xxxxxxxxx>
• Re: [linux-pm] [PATCH v2] [RFC] ehci: Disable wake on overcurrent (WKOC_E) and disconnect (WKDISC_E)
  • From: "Du, Alek" <alek.du@xxxxxxxxx>
• RE: [PATCH 0/3 v5] ISOC supporting for xHCI
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: [PATCH] xHCI: Fix wrong usage of macro TRB_TYPE
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Status of the patches under review (85 patches) and some misc notes about the devel procedures
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
• Re: Autosuspend and unbound interfaces
  • From: Rob Duncan <Robert.Duncan@xxxxxxxx>
• [PATCH] xhci: Transfer ring link TRB activation change.
  • From: John Youn <John.Youn@xxxxxxxxxxxx>
• Re: [PATCH/RFC v2] xhci: Transfer ring link TRB activation change.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH v2 1/1] xHCI: supporting MSI/MSI-X
  • From: "Nguyen, Dong" <Dong.Nguyen@xxxxxxx>
• Re: [linux-pm] [PATCH v2] [RFC] ehci: Disable wake on overcurrent (WKOC_E) and disconnect (WKDISC_E)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Autosuspend and unbound interfaces
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Remove the arbitrary limit of 15 xHCI ports
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3 v5] ISOC supporting for xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation
  • From: "Nguyen Dinh-R00091" <R00091@xxxxxxxxxxxxx>
• [PATCHv3 2.6.34-rc7 3/3] mx5: enable usb gadget for freescale mx51 babbage board
  • From: Dinh Nguyen <Dinh.Nguyen@xxxxxxxxxxxxx>
• [PATCHv3 2.6.34-rc7 1/3] mxc: gadget: remove 60mhz clock requirement for freescale mx51 usb core
  • From: Dinh Nguyen <Dinh.Nguyen@xxxxxxxxxxxxx>
• [PATCHv3 2.6.34-rc7 2/3] mx5: change usb clock source from pll3 to pll2
  • From: Dinh Nguyen <Dinh.Nguyen@xxxxxxxxxxxxx>
• Re: [PATCHv2 2.6.34-rc7 1/3] mxc: gadget: remove 60mhz clock requirement for freescale mx51 usb core
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Daniel Mack <daniel@xxxxxxxx>
• [PATCH 1/1] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• [PATCH 0/1] mx31: Fix usb otg host initialisation
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• [PATCH -next] gadget: f_fs.c needs to include pagemap.h
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: Status of the patches under review (85 patches) and some misc notes about the devel procedures
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [PATCH v2 1/1] xHCI: supporting MSI/MSI-X
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH RESEND v3 1/3] omap3: add platform init code for OHCI driver
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH RESEND v3 3/3] usb: ohci: Add Kconfig entries for ohci-omap3
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH RESEND v3 2/3] usb: ohci: introduce omap3 ohci-hcd driver
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH RESEND v3 0/3] usb: ohci: introduce ohci-hcd driver for omap3
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: Status of the patches under review (85 patches) and some misc notes about the devel procedures
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• [PATCHv2 2.6.34-rc7 2/3] mx5: change usb clock source from pll3 to pll2
  • From: Dinh Nguyen <Dinh.Nguyen@xxxxxxxxxxxxx>
• [PATCHv2 2.6.34-rc7 1/3] mxc: gadget: remove 60mhz clock requirement for freescale mx51 usb core
  • From: Dinh Nguyen <Dinh.Nguyen@xxxxxxxxxxxxx>
• [PATCHv2 2.6.34-rc7 3/3] mx5: enable usb gadget for freescale mx51 babbage board
  • From: Dinh Nguyen <Dinh.Nguyen@xxxxxxxxxxxxx>
• Re: [PATCH v2] can: Add driver for esd CAN-USB/2 device
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] can: Add driver for esd CAN-USB/2 device
  • From: Matthias Fuchs <matthias.fuchs@xxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
• Re: Status of the patches under review (85 patches) and some misc notes about the devel procedures
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxx>
• Re: [PATCH v2] can: Add driver for esd CAN-USB/2 device
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• [PATCH v2] can: Add driver for esd CAN-USB/2 device
  • From: Matthias Fuchs <matthias.fuchs@xxxxxx>
• [PATCH v2 1/1] xHCI: supporting MSI/MSI-X
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH v2 0/1] xHCI: supporting MSI/MSI-X
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
• Re: [PATCH] USB: ark3116: reimplement read processing
  • From: Bart Hartgers <bart.hartgers@xxxxxxxxx>
• [PATCH] EHCI: clear PHCD before resuming
  • From: "Du, Alek" <alek.du@xxxxxxxxx>
• Re: [alsa-devel] USB transfer_buffer allocations on 64bit systems
  • From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>