Use usb_serial_driver bulk_in_size and bulk_out_size to make sure
buffers of appropriate sizes are allocated in the first place rather than
reallocating them at every open.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/usb/serial/ir-usb.c | 30 +++++-------------------------
1 files changed, 5 insertions(+), 25 deletions(-)
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 71bdbe0..aaebb70 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -297,35 +297,10 @@ static int ir_startup(struct usb_serial *serial)
static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
{
- char *buffer;
int result = 0;
dbg("%s - port %d", __func__, port->number);
- if (buffer_size) {
- /* override the default buffer sizes */
- buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!buffer) {
- dev_err(&port->dev, "%s - out of memory.\n", __func__);
- return -ENOMEM;
- }
- kfree(port->read_urb->transfer_buffer);
- port->read_urb->transfer_buffer = buffer;
- port->read_urb->transfer_buffer_length = buffer_size;
- port->bulk_in_buffer = buffer;
-
- buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!buffer) {
- dev_err(&port->dev, "%s - out of memory.\n", __func__);
- return -ENOMEM;
- }
- kfree(port->write_urb->transfer_buffer);
- port->write_urb->transfer_buffer = buffer;
- port->write_urb->transfer_buffer_length = buffer_size;
- port->bulk_out_buffer = buffer;
- port->bulk_out_size = buffer_size;
- }
-
/* Start reading from the device */
usb_fill_bulk_urb(
port->read_urb,
@@ -585,6 +560,11 @@ static int __init ir_init(void)
{
int retval;
+ if (buffer_size) {
+ ir_device.bulk_in_size = buffer_size;
+ ir_device.bulk_out_size = buffer_size;
+ }
+
retval = usb_serial_register(&ir_device);
if (retval)
goto failed_usb_serial_register;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
