Linux USB Users

• Thread Index

• RE: [PATCH v3] can: Add driver for esd CAN-USB/2 device
  • From: Viral Mehta <Viral.Mehta@xxxxxxxxxxxxxxx>
• Re: omap udc driver problem with beagle board
  • From: Marco Stornelli <marco.stornelli@xxxxxxxxx>
• Re: [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module.
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH v2] cdc-acm: fix resource reclaim in error path of acm_probe
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• Re: omap udc driver problem with beagle board
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: question about the usb_string_sub
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• question about the usb_string_sub
  • From: saeed bishara <saeed.bishara@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• omap udc driver problem with beagle board
  • From: Marco Stornelli <marco.stornelli@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Danny Milosavljevic <danny_milo@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: fc12 slow usb sd-card upload
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• fc12 slow usb sd-card upload
  • From: ivan s <ivan.soleimanipour@xxxxxxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: "lsusb -vvv" returns "unrecognized" - why?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• "lsusb -vvv" returns "unrecognized" - why?
  • From: Danny Milosavljevic <danny_milo@xxxxxxxxx>
• Re: [Bugme-new] [Bug 16043] New: Resume w/USB remote working in 2.6.33.2, no longer in 2.6.33.10
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 16050] New: The ibmcam driver is not working
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [PATCH 1/3 v3] AM35x: Add musb support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] cdc-acm: fix resource reclaim in error path of acm_probe
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• RE: [PATCH 1/3 v3] AM35x: Add musb support
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [Bugme-new] [Bug 16043] New: Resume w/USB remote working in 2.6.33.2, no longer in 2.6.33.10
  • From: Scott Sturdivant <scott@xxxxxxxxxxx>
• Re: [Bugme-new] [Bug 16050] New: The ibmcam driver is not working
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [Bugme-new] [Bug 16050] New: The ibmcam driver is not working
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: composite: usb_string_id() doubts
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: composite: usb_string_id() doubts
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH v3] can: Add driver for esd CAN-USB/2 device
  • From: Matthias Fuchs <matthias.fuchs@xxxxxx>
• Re: [PATCH v3] can: Add driver for esd CAN-USB/2 device
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: Problem when USB hub is inserted
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCHv2.1] USB: gadget: f_fs: use usb_string_ids_n()
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• composite: usb_string_id() doubts
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH 1/3 v3] AM35x: Add musb support
  • From: David Brownell <david-b@xxxxxxxxxxx>
• composite: usb_string_id() doubts
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH v3] can: Add driver for esd CAN-USB/2 device
  • From: Matthias Fuchs <matthias.fuchs@xxxxxx>
• Re: [PATCH 1/3 v3] AM35x: Add musb support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module.
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCHv2 4/7] USB: gadget: composite: usb_string_ids_*() functions added
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv2 5/7] USB: gadget: f_fs: use usb_string_ids_n()
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv2 2/7] USB: gadget: f_mass_storage: fsg_add() renamed to fsg_bind_config()
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv2 3/7] USB: gadget: f_fs: functionfs_add() renamed to functionfs_bind_config()
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv2 0/7] Several improvements to USB gadgets
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv2 7/7] USB: gadget: g_multi: added documentation and INF files
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv2 6/7] USB: gadget: g_multi: code clean up and refactoring
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv2 1/7] USB: gadget: g_mass_storage: static data instead of dynamic allocation
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH] gadget/file_storage.c : Add a serial number parameter.
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: S5PV210: Assign clock rate for clk_xusbxti clock.
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH] cdc-acm: fix resource reclaim in error path of acm_probe
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: Problem when USB hub is inserted
  • From: Alessio Sangalli <alesan@xxxxxxxxxxx>
• Re: [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module.
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH] cdc-acm: fix resource reclaim in error path of acm_probe
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• [PATCH 2/4] ARM: S5PV210: Assign clock rate for clk_xusbxti clock.
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 1/4] ARM: S3C64XX: Add USB OTG HCLK to the list of clocks
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 3/4] ARM: S5P: Add clk_xusbxti clock to the list of clocks to be registered.
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH] Updates for S3C HSOTG driver
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module.
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [ANN] hidrd 0.2.0 released
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Problem when USB hub is inserted
  • From: Alessio Sangalli <alesan@xxxxxxxxxxx>
• Re: [Bugme-new] [Bug 16043] New: Resume w/USB remote working in 2.6.33.2, no longer in 2.6.33.10
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Problem when USB hub is inserted
  • From: Alessio Sangalli <alesan@xxxxxxxxxxx>
• [ANN] hidrd 0.2.0 released
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: [Bugme-new] [Bug 16043] New: Resume w/USB remote working in 2.6.33.2, no longer in 2.6.33.10
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] gadget/file_storage.c : Add a serial number parameter.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Marvell 88F6281 SoC
  • From: Greg Weeks <greg.weeks@xxxxxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Steve McKown <rsmckown@xxxxxxxxx>
• Re: Fail to generate PSCEG on disconnecting the device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] drivers/usb/host: Eliminate NULL dereference
  • From: Julia Lawall <julia@xxxxxxx>
• Re: question about drivers/usb/host/whci/qset.c
  • From: Julia Lawall <julia@xxxxxxx>
• Re: Problem when USB hub is inserted
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] otg.h: Fix the mixup in parameters order.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 11/11] drivers/usb/serial: Eliminate a NULL pointer dereference
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: question about drivers/usb/host/whci/qset.c
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: K-J pairs missing
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH v2] musb_core: make disconnect and suspend interrupts work again
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH 11/11] drivers/usb/serial: Eliminate a NULL pointer dereference
  • From: Julia Lawall <julia@xxxxxxx>
• [PATCH 1/11] drivers/usb/serial: Eliminate a NULL pointer dereference
  • From: Julia Lawall <julia@xxxxxxx>
• Re: K-J pairs missing
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• K-J pairs missing
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• question about drivers/usb/host/whci/qset.c
  • From: Julia Lawall <julia@xxxxxxx>
• RE: [PATCH 2/3] musb: populate board_data within musb structure
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH] gadget/file_storage.c : Add a serial number parameter.
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH 2/3] musb: populate board_data within musb structure
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 3/3] musb: use neednop flag for nop registration
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/3] OMAP3: musb: add neednop flag to fix nop modular issue
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH] otg.h: Fix the mixup in parameters order.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• RE: [PATCH resend] musb_core: make disconnect and suspend interrupts work again
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Problem when USB hub is inserted
  • From: Alessio Sangalli <alesan@xxxxxxxxxxx>
• Re: [PATCH] gadget/file_storage.c : Add a serial number parameter.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: [PATCH] gadget/file_storage.c : Add a serial number parameter.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: Can we implement USB Audio Device over Bulk endpoints instead of ISOCH.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] can: Add driver for esd CAN-USB/2 device
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH v3] can: Add driver for esd CAN-USB/2 device
  • From: Matthias Fuchs <matthias.fuchs@xxxxxx>
• Re: Can we implement USB Audio Device over Bulk endpoints instead of ISOCH.
  • From: "B.Vinai Kumar" <vinaibangala2001@xxxxxxxxx>
• RE: [PATCH v3] can: Add driver for esd CAN-USB/2 device
  • From: Viral Mehta <Viral.Mehta@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] can: Add driver for esd CAN-USB/2 device
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• [PATCH v3] can: Add driver for esd CAN-USB/2 device
  • From: Matthias Fuchs <matthias.fuchs@xxxxxx>
• Re: [PATCH] gadget/file_storage.c : Add a serial number parameter.
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: Can we implement USB Audio Device over Bulk endpoints instead of ISOCH.
  • From: "B.Vinai Kumar" <vinaibangala2001@xxxxxxxxx>
• Re: Can we implement USB Audio Device over Bulk endpoints instead of ISOCH.
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Can we implement USB Audio Device over Bulk endpoints instead of ISOCH.
  • From: "B.Vinai Kumar" <vinaibangala2001@xxxxxxxxx>
• [PATCH 05/11] USB: s3c-hsotg: Ensure FIFOs are fully flushed after layout
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH 02/11] USB: s3c_hsotg: define USB_GADGET_DUALSPEED in Kconfig
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH 04/11] USB: s3c-hsotg: SoftDisconnect minimum 3ms
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH 01/11] USB: s3c_hsotg: Add support for external USB clock
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH 06/11] USB: s3c-hsotg: Enable soft disconnect during initialization
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• s3c-hsotg driver updates/fixes
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH 07/11] USB: s3c-hsotg: Increase TX fifo limit
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH 03/11] USB: s3c-hsotg: Ensure TX FIFO addresses setup when initialising FIFOs
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Steve McKown <rsmckown@xxxxxxxxx>
• Re: [PATCH] hso: add support for new products
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] gadget/file_storage.c : Add a serial number parameter.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] gadget/file_storage.c : Add a serial number parameter.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] gadget/file_storage.c : Add a serial number parameter.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] gadget/file_storage.c : Add a serial number parameter.
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: Help: PXA255 UDC on zaurus c7x0 is not working.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Help: PXA255 UDC on zaurus c7x0 is not working.
  • From: Philip Tait <philip@xxxxxxxx>
• Re: [PATCH 2/3] xhci: Wait for host to start running.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 2/3] xhci: Wait for host to start running.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/3] xhci: Wait for host to start running.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Help: PXA255 UDC on zaurus c7x0 is not working.
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] hso: add support for new products
  • From: f.aben@xxxxxxxxxx
• Re: calibrating a hid device
  • From: Rafi Rubin <rafi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] xhci: Wait for host to start running.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH RESEND v5 0/3] ISOC supporting for xHCI
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: [PATCH 3/6] USB: s3c-hsotg: Ensure TX FIFO addresses setup when initialising FIFOs
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH 3/5] USB: add clk structure for systems that support clkdev framework
  • From: saeed bishara <saeed.bishara@xxxxxxxxx>
• [PATCH 1/3 v3] AM35x: Add musb support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/3 v3] musb: add musb support for AM35x
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 3/3 v3] musb: AM35x: Workaround for fifo read issue
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: [PATCH 5/6] USB: s3c-hsotg: Ensure FIFOs are fully flushed after layout
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• Re: [PATCH 3/6] USB: s3c-hsotg: Ensure TX FIFO addresses setup when initialising FIFOs
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• [PATCH 4/6] USB: s3c-hsotg: SoftDisconnect minimum 3ms
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH 3/6] USB: s3c-hsotg: Ensure TX FIFO addresses setup when initialising FIFOs
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH 1/6] USB: s3c_hsotg: Add support for external USB clock
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH 6/6] USB: s3c-hsotg: Enable soft disconnect during initialization
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• s3c-hsotg driver updates / fixes
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH 5/6] USB: s3c-hsotg: Ensure FIFOs are fully flushed after layout
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH 2/6] USB: s3c_hsotg: define USB_GADGET_DUALSPEED in Kconfig
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: calibrating a hid device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Help: PXA255 UDC on zaurus c7x0 is not working.
  • From: coredump007 <coredump007@xxxxxxxxx>
• Re: calibrating a hid device
  • From: Rafi Rubin <rafi@xxxxxxxxxxxxxx>
• [PATCH] usb: s3c: Enable soft disconnect during initialization
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH RESEND v5 0/3] ISOC supporting for xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: USB2.0 - low-speed USB audio interface?
  • From: "R.M. Thomas" <rmthomas@xxxxxxxxxxx>
• calibrating a hid device
  • From: Rafi Rubin <rafi@xxxxxxxxxxxxxx>
• [PATCH 3/3] xhci: Print NEC firmware version.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/3] xhci: Wait for host to start running.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/3] xhci: Wait for controller to be ready after reset.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 0/3] Bug fixes + NEC firmware version
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] file_storage usb gadget : add serial number parameter
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Help: PXA255 UDC on zaurus c7x0 is not working.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: calibrating a hid device
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [Uclinux-dist-devel] [stable] [PATCH] USB: musb: fix Blackfin building after power updates
  • From: Mike Frysinger <vapier.adi@xxxxxxxxx>
• Re: [stable] [PATCH] USB: musb: fix Blackfin building after power updates
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Setting USB device latency timer?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Setting USB device latency timer?
  • From: Grant <emailgrant@xxxxxxxxx>
• Re: [PATCH] file_storage usb gadget : add serial number parameter
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Setting USB device latency timer?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] MUSB: make non-OMAP platforms build with CONFIG_PM=y
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] file_storage usb gadget : add serial number parameter
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH] file_storage usb gadget : add serial number parameter
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• RE: [PATCH] file_storage usb gadget : add serial number parameter
  • From: Viral Mehta <Viral.Mehta@xxxxxxxxxxxxxxx>
• Help: PXA255 UDC on zaurus c7x0 is not working.
  • From: River Wang <coredump007@xxxxxxxxx>
• [PATCH] file_storage usb gadget : add serial number parameter
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: Setting USB device latency timer?
  • From: Grant <emailgrant@xxxxxxxxx>
• Adding serial number option in g_file_storage gadget module
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: Setting USB device latency timer?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Setting USB device latency timer?
  • From: Grant <emailgrant@xxxxxxxxx>
• Re: Adding serial number option in g_file_storage gadget module
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Setting USB device latency timer?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Setting USB device latency timer?
  • From: Grant <emailgrant@xxxxxxxxx>
• Re: Setting USB device latency timer?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Setting USB device latency timer?
  • From: Grant <emailgrant@xxxxxxxxx>
• [PATCH 111/199] Documentation/usb/linux.inf: Checkpatch cleanup
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 110/199] Documentation/usb/hotplug.txt: Checkpatch cleanup
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• [PATCH 109/199] Documentation/usb/ehci.txt: Checkpatch cleanup
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• Re: [PATCH 1/3] EHCI: EHCI 1.1 addendum: preparation
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Adding serial number option in g_file_storage gadget module
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] USB: musb: fix Blackfin building after power updates
  • From: Mike Frysinger <vapier.adi@xxxxxxxxx>
• Re: [PATCH] USB: musb: fix Blackfin building after power updates
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] USB: musb: fix Blackfin building after power updates
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: USB2.0 - low-speed USB audio interface?
  • From: "R.M. Thomas" <rmthomas@xxxxxxxxxxx>
• Re: USB2.0 - low-speed USB audio interface?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: USB2.0 - low-speed USB audio interface?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: USB2.0 - low-speed USB audio interface?
  • From: "R.M. Thomas" <rmthomas@xxxxxxxxxxx>
• [PATCH 25/27] drivers/usb/gadget: Use memdup_user
  • From: Julia Lawall <julia@xxxxxxx>
• Re: Multiple ttyUSBX , no udev which is which
  • From: Greg KH <greg@xxxxxxxxx>
• Re: USB2.0 - low-speed USB audio interface?
  • From: Greg KH <greg@xxxxxxxxx>
• Multiple ttyUSBX , no udev which is which
  • From: John Ervin <JohnLErvin@xxxxxxxxx>
• Re: [PATCH] EHCI: make CONFIG_USB_EHCI_TT_NEWSCHED default to Y
  • From: Benoit Jacob <jacob.benoit.1@xxxxxxxxx>
• Re: [PATCH] EHCI: make CONFIG_USB_EHCI_TT_NEWSCHED default to Y
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Bugme-new] [Bug 16023] New: g_ether.ko crashes at the board at91sam9260-ek
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 16023] New: g_ether.ko crashes at the board at91sam9260-ek
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] EHCI: make CONFIG_USB_EHCI_TT_NEWSCHED default to Y
  • From: Benoit Jacob <jacob.benoit.1@xxxxxxxxx>
• Re: [Bugme-new] [Bug 16023] New: g_ether.ko crashes at the board at91sam9260-ek
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] EHCI: make CONFIG_USB_EHCI_TT_NEWSCHED default to Y
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] EHCI: make CONFIG_USB_EHCI_TT_NEWSCHED default to Y
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Bugme-new] [Bug 16024] New: cannot submit datapipe for urb 0, error -28: not enough bandwidth
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] EHCI: make CONFIG_USB_EHCI_TT_NEWSCHED default to Y
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.35 merge window is over for USB
  • From: Greg KH <greg@xxxxxxxxx>
• Re: USB2.0 - low-speed USB audio interface?
  • From: Mike Thomas <rmthomas@xxxxxxxxxxx>
• Re: 2.6.35 merge window is over for USB
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Re: [USB-Storage Problem]:[USB3.0] The "urb->complete( )" can't be recalled after usb_submit_urb( )?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH RESEND v5 0/3] ISOC supporting for xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 16024] New: cannot submit datapipe for urb 0, error -28: not enough bandwidth
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/1] xHCI: Supporting MSI/MSI-X - Resend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] MUSB: make DBG() calls actually depend on CONFIG_USB_MUSB_DEBUG
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v4 1/1] xHCI: Supporting MSI/MSI-X - Resend
  • From: Dong Nguyen <Dong.Nguyen@xxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/1] xHCI: Supporting MSI/MSI-X - Resend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: USB2.0 - low-speed USB audio interface?
  • From: POD69@xxxxxxx
• Re: USB2.0 - low-speed USB audio interface?
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• 2.6.35 merge window is over for USB
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 075/229] USB: improve runtime remote wakeup settings
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: musb: fix Blackfin ulpi stubs
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Steve McKown <rsmckown@xxxxxxxxx>
• Re: USB2.0 - low-speed USB audio interface?
  • From: POD69@xxxxxxx
• [PATCH] iuu_phoenix: Add support for different baud rates.
  • From: James Courtier-Dutton <James@xxxxxxxxxxxxxx>
• Re: [PATCH 7/8] USB: gadget: g_multi: more configurable
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCH 1/1] iuu_phoenix: Add baud rate changing function.
  • From: James Courtier-Dutton <james.dutton@xxxxxxxxx>
• Re: [PATCH 5/8] USB: gadget: f_fs: use usb_string_ids_n()
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] USB: musb: fix unused mbase warning
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• [PATCH] USB: isp1362: fix inw warning on Blackfin systems
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH 3/3 v2] musb: AM35x: Workaround for fifo read issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [PATCH v4 1/1] xHCI: Supporting MSI/MSI-X - Resend
  • From: "Nguyen, Dong" <Dong.Nguyen@xxxxxxx>
• Re: [PATCH v4 1/1] xHCI: Supporting MSI/MSI-X - Resend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 075/229] USB: improve runtime remote wakeup settings
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Steve McKown <rsmckown@xxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Steve McKown <rsmckown@xxxxxxxxx>
• [PATCH 007/229] USB: sisusbvga: Remove the BKL from ioctl
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 013/229] USB: remove uses of URB_NO_SETUP_DMA_MAP
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 014/229] USB: ehci-au1xxx does not need EHCI IO watchdog
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 011/229] USB: remove bogus USB_PORT_FEAT_*_SPEED symbols
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 015/229] usb-serial: Use tty_port version console instead of usb_serial_port
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 012/229] USB: straighten out port feature vs. port status usage
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 019/229] USB: MUSB: Add OMAP4 support in MUSB driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 016/229] usb: musb: allow board to pass down fifo mode
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 023/229] usb: musb: hsdma: use musb_read/writel
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 017/229] usb: musb: Set transceiver interface type
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 010/229] USB: remove duplicated #include
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 020/229] USB: musb: allow the Blackfin vrsel gpio to be active low
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 026/229] USB Serial Driver: ZIO Motherboard
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 024/229] USB: f_mass_storage: dynamic buffers for better alignment
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 029/229] USB: serial: allow drivers to define bulk buffer sizes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 030/229] USB: cp210x: increase the bulk-out buffer size to 256 byte
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 028/229] USB: Add a new quirk: USB_QUIRK_HONOR_BNUMINTERFACES
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 033/229] USB: pl2303: increase bulk-in buffer size to 256 byte
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 038/229] USB: serial: refactor read urb submission in generic driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 035/229] USB: serial: fix missing locking on fifo in write callback
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 039/229] USB: serial: remove unnecessary re-initialisation of generic urbs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 041/229] USB: serial: clean up read processing in generic driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 044/229] USB: serial: export generic throttle and unthrottle
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 036/229] USB: serial: clear fifo on close
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 049/229] USB: pl2303: use generic close
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 042/229] USB: serial: generalise generic read implementation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 050/229] USB: usb_debug: use the generic kfifo-based write implementation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 058/229] USB: musb: support host/gadget role switching on Blackfin parts
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 059/229] MUSB: OMAP: remove omap_vbus_power()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 064/229] usb: musb: omap2430.c: remove unnecessary includes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 056/229] USB: option.c: option_indat_callback: Resubmit some unsuccessful URBs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 062/229] MUSB: Blackfin: remove musb_platform_{suspend|resume}()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 068/229] usb: gadget: Allow larger configuration descriptors
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 061/229] MUSB: OMAP: make musb_platform_suspend() 'static'
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 078/229] USB: deprecate the power/level sysfs attribute
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 066/229] usb: musb: Add extvbus in musb_board_data
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 077/229] USB: use PM core routines to enable/disable autosuspend
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 076/229] USB: don't enable remote wakeup by default
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 075/229] USB: improve runtime remote wakeup settings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 079/229] usb serial: Add generic USB wwan support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 074/229] USB: fix usbmon and DMA mapping for scatter-gather URBs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 071/229] USB: otg: ulpi: use the global ULPI register definitions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 085/229] USB: xhci: Add memory allocation for USB3 bulk streams.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 086/229] USB: xhci: Correct assumptions about number of rings per endpoint.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 088/229] USB: storage: Remove unneeded SL11R unusual_devs entry
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 089/229] USB: ehci: Elide I/O watchdog on NEC parts
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 093/229] USB: Short new 'graph for usb-serial.txt
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 092/229] USB: devices: fix Coding Styles
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 084/229] USB: Add stream ID field to struct urb.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [GIT PATCH] USB patches for 2.6.35
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH 094/229] USB: rename usb_buffer_alloc() and usb_buffer_free() users
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 091/229] USB: ueagle: fix Coding Styles
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 098/229] USB: usbserial: fix mos7720 dependencies
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 095/229] USB: staging: fix up usb_buffer_alloc calls in the staging tree
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 099/229] usb: cdc: ncm constants and structures added
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 096/229] USB: usbserial: mos7720: add support for parallel port on moschip 7715
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 100/229] USB: ncm: added ncm.h with auxiliary definitions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 104/229] USB: Mass storage gadget: Handle eject request
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 106/229] USB: mos7840: Cleanup useless header
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 111/229] USB: remove URB_NO_SETUP_DMA_MAP
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 103/229] USB: Composite framework: Add suspended sysfs entry
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 117/229] USB: mxc: gadget: Fix bitfield for calculating maximum packet size
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 113/229] USB: option: add PID for ZTE product
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 109/229] USB: export the new ch11.h file to userspce
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 122/229] usb: u132-hcd.c: fix shadows sparse warning
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 118/229] USB: unusual-dev: Add bad sense flag for Appotech ax203 based picture frames
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 128/229] USB gadget: Webcam device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 115/229] usb: ehci-omap: fix compilation warning
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 129/229] USB: simplify usb_sg_init()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 126/229] USB: Change the scatterlist type in struct urb
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 134/229] USB: serial: reimplement generic fifo-based writes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 131/229] USB: ftdi_sio: switch to generic write implementation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 133/229] USB: aircable: rewrite using generic read and write implementations
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 142/229] USB: ffs-test: FunctionFS testing program
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 140/229] USB: f_fs: the FunctionFS driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 149/229] USB: ark3116: reimplement read processing
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 154/229] USB: ftdi_sio: clean up line-status handling
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 153/229] USB: pl2303: use tty_insert_flip_string_fixed_flag
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 162/229] USB: fix interface runtime-PM settings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 155/229] USB: mxc: gadget: remove 60mhz clock requirement for freescale mx51 usb core
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 152/229] USB: ftdi_sio: use tty_insert_flip_string_fixed_flag
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 160/229] USB: xhci: Transfer ring link TRB activation change.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 163/229] USB: ehci-omap: Fix resume failures after bus suspend
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 159/229] USB: gadget: f_fs.c needs to include pagemap.h
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 168/229] USB: fix functionfs for CONFIG_NET disabled
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 174/229] USB: ir-usb: reimplement using generic framework
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 176/229] USB: ipw: remove dummy port_probe and port_remove
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 172/229] USB: ir-usb: allow custom bulk buffer size without reallocation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 166/229] USB: remove usb_find_device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 169/229] USB: EHCI: clear PHCD before resuming
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 170/229] USB: EHCI: fix controller wakeup flag settings during suspend
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 182/229] USB: belkin_sa.h: checkpatch cleanups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 178/229] USB: io_edgeport: Use kzalloc
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 173/229] USB: ir-usb: fix set_termios race
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 185/229] USB: io_edgeport: checkpatch cleanups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 190/229] USB: usb.h: checkpatch cleanups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 184/229] USB: ftdi_sio: checkpatch cleanups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 199/229] USB: spcp8x5: reimplement using generic framework
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 197/229] USB: empeg: reimplement using generic framework
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 216/229] USB: safe_serial: reimplement write using generic framework
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 212/229] USB: oti6858: use kfifo to implement write buffering
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 203/229] USB: belkin_sa: minor clean-ups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 206/229] USB: visor: increase bulk-out buffer size
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 213/229] USB: oti6858: use port write fifo
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 214/229] USB: usb-storage: trivial debug improvements
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 219/229] USB: aircable: fix incorrect write-buffer length
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 221/229] USB: ti_usb: use kfifo to implement write buffering
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 224/229] USB: kl5usb105: fix memory leak
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 228/229] usb: musb: update gfp/slab.h includes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 229/229] USB: remove unused usb_buffer_alloc and usb_buffer_free macros
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 227/229] USB: ftdi_sio: fix legacy SIO-device header
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 225/229] USB: kl5usb105: minor clean ups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 223/229] USB: io_ti: use kfifo to implement write buffering
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 226/229] USB: kl5usb105: reimplement using generic framework
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 222/229] USB: io_ti: remove unsused private counter
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 220/229] USB: ir-usb: fix incorrect write-buffer length
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 218/229] USB: safe_serial: straighten out read processing
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 215/229] usb-storage: always print quirks
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 217/229] USB: safe_serial: reimplement read using generic framework
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 210/229] USB: cypress_m8: remove unused drain define
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 209/229] USB: usb_debug: set bulk out size at probe
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 211/229] USB: cypress_m8: use kfifo to implement write buffering
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 207/229] USB: CP210x New Device IDs 11 New device IDs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 208/229] USB: gadget: Use kmemdup
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 204/229] USB: belkin_sa: clean up open
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 205/229] USB: belkin_sa: implement line status handling
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 201/229] USB: visor: reimplement using generic framework
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 202/229] USB: cp210x: use generic open to start reading from device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 200/229] USB: visor: fix memory leak
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 196/229] USB: serial: add special case for processing of empty read urbs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 198/229] USB: ipaq: reimplement using generic framework
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 194/229] USB: option.c: OLIVETTI OLICARD100 support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 195/229] USB: kobil: fix memory leak
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 193/229] USB: xhci: fix compiler warning.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 191/229] USB: include/usb/*.h checkpatch cleanup
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 192/229] USB: remove match_device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 189/229] USB: visor.h: checkpatch cleanups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 188/229] USB: pl2303.h: checkpatch cleanups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 187/229] USB: kobil_sct.h: checkpatch cleanups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 186/229] USB: kl5kusb105.h: checkpatch cleanups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 183/229] USB: cypress_m8.h: checkpatch cleanups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 181/229] USB: mct_u232.h: checkpatch cleanups
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 179/229] USB: cp210x: remove redundant disconnect()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 175/229] USB: ipw: clean up dtr-rts handling
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 177/229] USB: ipw: reimplement using generic framework
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 171/229] USB: ir-usb: fix double free
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 165/229] USB: gadget: f_mass_storage: fix in error recovery
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 167/229] USB: xhci: Remove the arbitrary limit of 15 xHCI ports
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 158/229] USB: ohci: Add Kconfig entries for ohci-omap3
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 164/229] USB: add missing "{}" in map_urb_for_dma
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 161/229] USB: xHCI: Fix wrong usage of macro TRB_TYPE
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 157/229] USB: ohci: introduce omap3 ohci-hcd driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 156/229] USB: omap3: add platform init code for OHCI driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 150/229] USB: usbcore: Do not disable USB3 protocol ports in hub_activate()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 151/229] USB: isp1760: Soften DW3 X/transaction error bit handling
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 146/229] USB: fix u132-hcd code/data warning
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 147/229] USB: gadget: Allow function access to device ID data during bind()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 144/229] USB: testusb: testusb compatibility with FunctionFS gadget
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 143/229] USB: testusb: an USB testing application
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 145/229] USB: xhci: Set stream ID to 0 after cleaning up stalls.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 137/229] wait_event_interruptible_locked() interface
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 141/229] USB: g_ffs: the FunctionFS gadget driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 139/229] USB: gadget: __init and __exit tags removed
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 138/229] fs/timerfd.c: make use of wait_event_interruptible_locked_irq()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 135/229] USB: serial: remove multi-urb write from generic driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 136/229] USB: gadget webcam: depends on VIDEO_DEV
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 132/229] USB: ftdi_sio: clean up SIO write support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 130/229] USB: isp1760: Use resource_size
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 127/229] USB gadget: video class function driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 124/229] USB: Add a usb_pipe_endpoint() convenience function
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 121/229] usb: sisusb_con.c: fix shadows sparse warning
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 125/229] USB: Turn interface_to_usbdev into an inline function
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 123/229] USB: Add definition for the Pipe Usage descriptor
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 120/229] USB: oti6858: declare send_data() as static
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 119/229] USB: whci: declare functions as static
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 116/229] USB: ehci-omap: fix Si version related programming
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 114/229] USB: qcaux: add Samsung U520 device ID
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 112/229] USB: xhci: Avoid double free after streams are disabled.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 110/229] USB: remove the usb_host_ss_ep_comp structure
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 107/229] USB: g_hid: unregister platform driver on probe/usb_composite_register errors
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 108/229] USB: remove leftover references to udev->autosuspend_disabled
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 105/229] USB: sisusbvga: Remove the BKL from open
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 102/229] USB: clean up some host controller sparse warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 101/229] USB: core: config.c: usb_get_configuration() simplified
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 097/229] USB: usbserial: mos7720: cleanup, consolidation, replace send_mos_cmd with {read,write}_mos_reg
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 090/229] USB: omap: switch to subsys_initcall for isp1301 transceiver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 087/229] USB: Support for allocating USB 3.0 streams.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 080/229] USB: option: Use generic USB wwan code
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 081/229] USB: qcserial: Use generic USB wwan code
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 083/229] USB: Add parsing of SuperSpeed endpoint companion descriptor.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 082/229] USB: qcserial: Add support for Qualcomm Gobi 2000 devices
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 072/229] usb: otg: twl4030: use the global ULPI register definitions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 073/229] USB: pxa27x_udc: use four bits to store endpoint addresses
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 070/229] usb: otg: add global ULPI register definitions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 069/229] USB: gadget: f_mass_storage: per function
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 067/229] usb: musb: add ulpi access operations
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 065/229] usb: musb: Makefile: remove unexistent config option
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 063/229] usb: musb: omap2430: remove unused define
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 060/229] MUSB: Blackfin: remove bfin_vbus_power()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 055/229] USB: gadget: add HID gadget driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 057/229] usb: musb: debugfs: musb_exit_debugfs() can be called on probe
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 054/229] USB: ftdi_sio: fix some coding style issues
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 047/229] USB: serial: clean up generic write start busy test
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 053/229] USB: serial: generalise write buffer preparation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 052/229] USB: serial: re-implement multi-urb writes in generic driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 051/229] USB: serial: allow custom multi-urb write bulk callbacks
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 048/229] USB: pl2303: switch to generic write implementation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 046/229] USB: serial: clean up some error and debug messages in generic driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 045/229] USB: ftdi_sio: switch to generic read implementation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 043/229] USB: pl2303: switch to generic read implementation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 040/229] USB: cp210x: use generic submit_read_urb at open
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 037/229] USB: serial: refactor generic close
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 034/229] USB: serial: fix generic chars_in_buffer
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 032/229] USB: pl2303: increase the bulk-out buffer size to 256 byte
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 031/229] USB: cp210x: increase bulk-in buffer size to 256 byte
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 027/229] usb: fix serial build when SYSRQ is disabled
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 022/229] usb: musb: gadget: support musb-specific test modes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 025/229] usb-console: pass baud from console to the initial tty open
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 021/229] usb: musb: add debugfs support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 018/229] USB: MUSB: Build MUSB driver for OMAP4
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 008/229] USB: cdc-acm: make bitfields unsigned
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 009/229] USB: Remove large struct from the stack in USB storage isd200 driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 006/229] USB: split hub.h into ch11.h and merge-in hcd.h
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 004/229] USB: make hcd.h public (drivers dependency)
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 005/229] USB: make hub.h public (drivers dependency)
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 003/229] USB: xhci: Fix check for room on the ring.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 002/229] USB: xhci: Limit bus sg_tablesize to 62 TRBs.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 001/229] USB: xhci: Fix issue with set interface after stall.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• Re: USB2.0 - low-speed USB audio interface?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• Re: [PATCH v4 1/1] xHCI: Supporting MSI/MSI-X - Resend
  • From: Dong Nguyen <Dong.Nguyen@xxxxxxx>
• Re: [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] USB driver for Meywa-Denki & Kayac YUREX
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH] USB driver for Meywa-Denki & Kayac YUREX
  • From: Tomoki Sekiyama <tomoki.sekiyama@xxxxxxxxx>
• [PATCH resend] musb_core: make disconnect and suspend interrupts work again
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH] musb_core: make
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• Re: [PATCH v4 1/1] xHCI: Supporting MSI/MSI-X
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] USB: gadget: f_fs: use usb_string_ids_n()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 7/8] USB: gadget: g_multi: more configurable
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/8] USB: gadget: g_multi: more configurable
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Proposed patch for cp210x: GPIO and USB descriptor control
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix board data to support device only, host only and OTG roles.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>