Added board_data within musb as it would be required in
musb_platform_exit() also to unregister the nop transceiver.
Also changed the signature of musb_platform_init() as now
board_data can be taken from musb itself.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
---
drivers/usb/musb/blackfin.c | 2 +-
drivers/usb/musb/davinci.c | 2 +-
drivers/usb/musb/musb_core.c | 3 ++-
drivers/usb/musb/musb_core.h | 3 ++-
drivers/usb/musb/omap2430.c | 4 ++--
drivers/usb/musb/tusb6010.c | 2 +-
6 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index b611420..0bef011 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -323,7 +323,7 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
return -EIO;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
{
/*
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 5762436..ce2e16f 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -376,7 +376,7 @@ int musb_platform_set_mode(struct musb *musb, u8 mode)
return -EIO;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
{
void __iomem *tibase = musb->ctrl_base;
u32 revision;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index d3911ab..1ccc4d7 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1961,6 +1961,7 @@ bad_config:
}
spin_lock_init(&musb->lock);
+ musb->board_data = plat->board_data;
musb->board_mode = plat->mode;
musb->board_set_power = plat->set_power;
musb->set_clock = plat->set_clock;
@@ -1995,7 +1996,7 @@ bad_config:
* isp1504, non-OTG, etc) mostly hooking up through ULPI.
*/
musb->isr = generic_interrupt;
- status = musb_platform_init(musb, plat->board_data);
+ status = musb_platform_init(musb);
if (status < 0)
goto fail2;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 7cef2b7..9dddaa4 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -393,6 +393,7 @@ struct musb {
int (*board_set_power)(int state);
int (*set_clock)(struct clk *clk, int is_active);
+ void *board_data; /* board specific data */
u8 min_power; /* vbus for periph, in mA/2 */
@@ -604,7 +605,7 @@ extern int musb_platform_get_vbus_status(struct musb *musb);
#define musb_platform_get_vbus_status(x) 0
#endif
-extern int __init musb_platform_init(struct musb *musb, void *board_data);
+extern int __init musb_platform_init(struct musb *musb);
extern int musb_platform_exit(struct musb *musb);
#endif /* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index e06d65e..50591e7 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -189,10 +189,10 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
return 0;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
{
u32 l;
- struct omap_musb_board_data *data = board_data;
+ struct omap_musb_board_data *data = musb->board_data;
#if defined(CONFIG_ARCH_OMAP2430)
omap_cfg_reg(AE5_2430_USB0HS_STP);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 05c077f..60d3938 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1104,7 +1104,7 @@ err:
return -ENODEV;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
{
struct platform_device *pdev;
struct resource *mem;
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
