From: Johan Hovold <jhovold@xxxxxxxxx>
Remove some whitepace and comments.
Clean up close.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/serial/belkin_sa.c | 28 +++++++---------------------
1 files changed, 7 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index bdab31a..9dbb07e 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -112,7 +112,6 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
{ } /* Terminating entry */
};
-
MODULE_DEVICE_TABLE(usb, id_table_combined);
static struct usb_driver belkin_driver = {
@@ -120,7 +119,7 @@ static struct usb_driver belkin_driver = {
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table_combined,
- .no_dynamic_id = 1,
+ .no_dynamic_id = 1,
};
/* All of the device info needed for the serial converters */
@@ -145,7 +144,6 @@ static struct usb_serial_driver belkin_device = {
.release = belkin_sa_release,
};
-
struct belkin_sa_private {
spinlock_t lock;
unsigned long control_state;
@@ -196,23 +194,17 @@ static int belkin_sa_startup(struct usb_serial *serial)
return 0;
}
-
static void belkin_sa_release(struct usb_serial *serial)
{
- struct belkin_sa_private *priv;
int i;
dbg("%s", __func__);
- for (i = 0; i < serial->num_ports; ++i) {
- /* My special items, the standard routines free my urbs */
- priv = usb_get_serial_port_data(serial->port[i]);
- kfree(priv);
- }
+ for (i = 0; i < serial->num_ports; ++i)
+ kfree(usb_get_serial_port_data(serial->port[i]));
}
-
-static int belkin_sa_open(struct tty_struct *tty,
+static int belkin_sa_open(struct tty_struct *tty,
struct usb_serial_port *port)
{
int retval = 0;
@@ -239,8 +231,7 @@ static int belkin_sa_open(struct tty_struct *tty,
exit:
return retval;
-} /* belkin_sa_open */
-
+}
static void belkin_sa_close(struct usb_serial_port *port)
{
@@ -248,8 +239,7 @@ static void belkin_sa_close(struct usb_serial_port *port)
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
-} /* belkin_sa_close */
-
+}
static void belkin_sa_read_int_callback(struct urb *urb)
{
@@ -480,8 +470,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
spin_lock_irqsave(&priv->lock, flags);
priv->control_state = control_state;
spin_unlock_irqrestore(&priv->lock, flags);
-} /* belkin_sa_set_termios */
-
+}
static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
{
@@ -492,7 +481,6 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
dev_err(&port->dev, "Set break_ctl %d\n", break_state);
}
-
static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
@@ -509,7 +497,6 @@ static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
return control_state;
}
-
static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
@@ -581,7 +568,6 @@ failed_usb_serial_register:
return retval;
}
-
static void __exit belkin_sa_exit (void)
{
usb_deregister(&belkin_driver);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
