From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
boards might want to optimize their fifo configuration
to the particular needs of that specific board. Allow
that by moving all related data structures to
<linux/usb/musb.h>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/musb/musb_core.c | 36 ++++++++++++++++--------------------
include/linux/usb/musb.h | 35 +++++++++++++++++++++++++++++++++++
2 files changed, 51 insertions(+), 20 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ced6d9e..3f4c158 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -995,24 +995,13 @@ static ushort __initdata fifo_mode = 2;
module_param(fifo_mode, ushort, 0);
MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
-
-enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed));
-enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed));
-
-struct fifo_cfg {
- u8 hw_ep_num;
- enum fifo_style style;
- enum buf_mode mode;
- u16 maxpacket;
-};
-
/*
* tables defining fifo_mode values. define more if you like.
* for host side, make sure both halves of ep1 are set up.
*/
/* mode 0 - fits in 2KB */
-static struct fifo_cfg __initdata mode_0_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_0_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
@@ -1021,7 +1010,7 @@ static struct fifo_cfg __initdata mode_0_cfg[] = {
};
/* mode 1 - fits in 4KB */
-static struct fifo_cfg __initdata mode_1_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_1_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
@@ -1030,7 +1019,7 @@ static struct fifo_cfg __initdata mode_1_cfg[] = {
};
/* mode 2 - fits in 4KB */
-static struct fifo_cfg __initdata mode_2_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_2_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1040,7 +1029,7 @@ static struct fifo_cfg __initdata mode_2_cfg[] = {
};
/* mode 3 - fits in 4KB */
-static struct fifo_cfg __initdata mode_3_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_3_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1050,7 +1039,7 @@ static struct fifo_cfg __initdata mode_3_cfg[] = {
};
/* mode 4 - fits in 16KB */
-static struct fifo_cfg __initdata mode_4_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_4_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1081,7 +1070,7 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
};
/* mode 5 - fits in 8KB */
-static struct fifo_cfg __initdata mode_5_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_5_cfg[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
@@ -1119,7 +1108,7 @@ static struct fifo_cfg __initdata mode_5_cfg[] = {
*/
static int __init
fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
- const struct fifo_cfg *cfg, u16 offset)
+ const struct musb_fifo_cfg *cfg, u16 offset)
{
void __iomem *mbase = musb->mregs;
int size = 0;
@@ -1190,17 +1179,23 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
}
-static struct fifo_cfg __initdata ep0_cfg = {
+static struct musb_fifo_cfg __initdata ep0_cfg = {
.style = FIFO_RXTX, .maxpacket = 64,
};
static int __init ep_config_from_table(struct musb *musb)
{
- const struct fifo_cfg *cfg;
+ const struct musb_fifo_cfg *cfg;
unsigned i, n;
int offset;
struct musb_hw_ep *hw_ep = musb->endpoints;
+ if (musb->config->fifo_cfg) {
+ cfg = musb->config->fifo_cfg;
+ n = musb->config->fifo_cfg_size;
+ goto done;
+ }
+
switch (fifo_mode) {
default:
fifo_mode = 0;
@@ -1235,6 +1230,7 @@ static int __init ep_config_from_table(struct musb *musb)
musb_driver_name, fifo_mode);
+done:
offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
/* assert(offset > 0) */
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 7acef02..f3d68f6 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -22,12 +22,47 @@ enum musb_mode {
struct clk;
+enum musb_fifo_style {
+ FIFO_RXTX,
+ FIFO_TX,
+ FIFO_RX
+} __attribute__ ((packed));
+
+enum musb_buf_mode {
+ BUF_SINGLE,
+ BUF_DOUBLE
+} __attribute__ ((packed));
+
+struct musb_fifo_cfg {
+ u8 hw_ep_num;
+ enum musb_fifo_style style;
+ enum musb_buf_mode mode;
+ u16 maxpacket;
+};
+
+#define MUSB_EP_FIFO(ep, st, m, pkt) \
+{ \
+ .hw_ep_num = ep, \
+ .style = st, \
+ .mode = m, \
+ .maxpacket = pkt, \
+}
+
+#define MUSB_EP_FIFO_SINGLE(ep, st, pkt) \
+ MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)
+
+#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt) \
+ MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
+
struct musb_hdrc_eps_bits {
const char name[16];
u8 bits;
};
struct musb_hdrc_config {
+ struct musb_fifo_cfg *fifo_cfg; /* board fifo configuration */
+ unsigned fifo_cfg_size; /* size of the fifo configuration */
+
/* MUSB configuration-specific details */
unsigned multipoint:1; /* multipoint device */
unsigned dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
