Linux USB Users

• Thread Index

• Re: [PATCH 1/4] option: convert interface blacklisting to bitfields
  • From: Matthias Urlichs <matthias@xxxxxxxxxx>
• [PATCH 4/4] option: add various ZTE device network interfaces to the blacklist
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [PATCH 3/4] option: add ZTE product 0x0037 to sendsetup blacklist
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [PATCH 2/4] option: convert Huawei K3765 & K4505 reservered interface to blacklist
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [PATCH 1/4] option: convert interface blacklisting to bitfields
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [PATCH 0/0] option: quirk and blacklist cleanups and additions
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 6/6 v2] usb: musb: Add support for ti81xx platform
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] at91/usb: always provide all the clocks
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• [PATCHv4 00/19] First round in OTG rework
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 04/19] usb: otg: ab8500: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 03/19] usb: otg: Separate otg members from usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 02/19] usb: otg: Rename usb_otg and usb_xceiv to usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 01/19] usb: otg: Rename otg_transceiver to usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 05/19] usb: otg: fsl: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 06/19] usb: otg: gpio_vbus: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 14/19] arm: imx: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 13/19] usb: otg: ulpi: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 12/19] usb: otg: twl6030: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 08/19] usb: otg: msm: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 07/19] usb: otg: isp1301_omap: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 15/19] usb: musb: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 10/19] usb: otg: nop: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 17/19] usb: Convert all users to new usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 16/19] power_supply: Convert all users to new usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 09/19] usb: otg: langwell: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 11/19] usb: otg: twl4030: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 18/19] usb: otg: Remove OTG specific members from usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv4 19/19] usb: otg: Convert all users to pass struct usb_otg for OTG functions
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 2/6 v2] omap: musb: Adding support for ti81xx
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/6 v2] omap: musb: Adding hwmod data for ti81xx
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 5/6 v2] ti814evm: Add support for musb interface
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 6/6 v2] usb: musb: Add support for ti81xx platform
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 0/6 v2] usb: musb: Adding support for ti81xx
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 3/6 v2] omap: musb: ti81xx: Add phy power function
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 4/6 v2] ti816evm: Add support for musb interface
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2] at91/usb: always provide all the clocks
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH] at91/usb: always provide all the clocks
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: usb3 hubs and usb2 virtual hubs
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: musb: omap2+: save and restore OTG_INTERFSEL
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/3] at91-ohci: support overcurrent notification
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 3/3] at91-ohci: configure overcurrent pins as input GPIOs
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 1/3] ohci-at91: add vbus_pin_inverted platform attribute
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCHv4 04/19] usb: otg: ab8500: Start using struct usb_otg
  • From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
• [v2 0/2] usb: musb: off mode fixes
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [v2 1/2] usb: musb: omap2+: fix context api's
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [v2 2/2] usb: musb: omap2+: save and restore OTG_INTERFSEL
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• Re: usb3 hubs and usb2 virtual hubs
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH 3/3] at91-ohci: configure overcurrent pins as input GPIOs
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH] at91/usb: always provide all the clocks
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH] at91/usb: always provide all the clocks
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v2] at91/usb: always provide all the clocks
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH 6/9 v3] xHCI: Check host USB2 LPM capability
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• DWC OTG / DMA Device/ fails during Get Device Descriptor IN stage if Cable is already connected during kernel boot
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• [PATCH] USB: for usb_autopm_get_interface_async -EINPROGRESS is not an error
  • From: Jim Wylder <jwylder1@xxxxxxxxxxxx>
• [PATCH 2/2] usb: musb: omap2+: save and restore OTG_INTERFSEL
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH 1/2] usb: musb: omap2+: fix context api's
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH 0/2] usb: musb: off mode fixes
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• Re: usb3 hubs and usb2 virtual hubs
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: HID device question.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb3 hubs and usb2 virtual hubs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: Guide/example for using the USB gadget HID API?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• usb3 hubs and usb2 virtual hubs
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Greg KH <gregkh@xxxxxxx>
• Re: PROBLEM: USB 1.1 (and up) not working on AMD R900 Series chipset
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• PROBLEM: USB 1.1 (and up) not working on AMD R900 Series chipset
  • From: Oliver Schinagl <oliver@xxxxxxxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• RE: Guide/example for using the USB gadget HID API?
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: problems with usb 3.0 on clevo p150hm
  • From: Julian Sikorski <belegdol@xxxxxxxxx>
• Re: [PATCH 6/9 v3] xHCI: Check host USB2 LPM capability
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Decouple XHCI from PCI, v4
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• isp1362
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• Re: [BUG] D state process after unplug and umount usb disk
  • From: Dave Young <hidave.darkstar@xxxxxxxxx>
• [PATCH 8/9 v3] xHCI: set USB2 hardware LPM
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 0/9 v3] xHCI USB2 hardware LPM patchset
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 7/9 v3] xHCI: test USB2 software LPM
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 9/9 v3] usbcore: add sysfs support to xHCI usb2 hardware LPM
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 5/9 v3] xHCI: Clear PLC for USB2 root hub ports
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 6/9 v3] xHCI: Check host USB2 LPM capability
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 3/9 v3] xHCI: set link state
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 2/9 v3] usbcore: check device's LPM capability
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 1/9 v3] usbcore: get BOS descriptor set
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 4/9 v3] xHCI: test and clear RWC bit
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH 6/6] usb: musb: Add support for ti81xx platform
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 6/6] usb: musb: Add support for ti81xx platform
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: problems with usb 3.0 on clevo p150hm
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: HID device question.
  • From: "Chris Furlough" <chrisfurlough@xxxxxxxxxxx>
• Re: HID device question.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Guide/example for using the USB gadget HID API?
  • From: Paul Zimmerman <paul.zimmerman@xxxxxxxxxxxx>
• Guide/example for using the USB gadget HID API?
  • From: Stephen P Welte <swelte1@xxxxxxxxxxxxxx>
• Re: problems with usb 3.0 on clevo p150hm
  • From: Julian Sikorski <belegdol@xxxxxxxxx>
• Re: [PATCH 14/14] arm/include/asm/io.h : added macros to read/write big/little endian register
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: ehci: remove the 1st wmb in qh_append_tds
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/4] usb: ehci: fix comment for EHCI_SHRINK_JIFFIES
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/4] usb: ehci: only prepare zero packet for out transfer if required
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 14/14] arm/include/asm/io.h : added macros to read/write big/little endian register
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 4/4] usb: ehci: remove the 1st wmb in qh_append_tds
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 3/4] usb: ehci: fix comment for EHCI_SHRINK_JIFFIES
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 2/4] usb: ehci: only prepare zero packet for out transfer if required
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 1/4] usb: ehci: remove wmb in qh_update
  • From: tom.leiming@xxxxxxxxx
• [PATCH 2/2] xhci-mem.c: xhci_segment_free: No need for checking seg argument
  • From: Kautuk Consul <consul.kautuk@xxxxxxxxx>
• [PATCH 1/2] xhci-mem.c: Check for ring->first_seg != NULL
  • From: Kautuk Consul <consul.kautuk@xxxxxxxxx>
• Re: Decouple XHCI from PCI, v4
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [BUG] D state process after unplug and umount usb disk
  • From: Dave Young <hidave.darkstar@xxxxxxxxx>
• Re: [BUG] D state process after unplug and umount usb disk
  • From: Dave Young <hidave.darkstar@xxxxxxxxx>
• Re: HID device question.
  • From: "Chris Furlough" <chrisfurlough@xxxxxxxxxxx>
• Re: HID device question.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] D state process after unplug and umount usb disk
  • From: Dave Young <hidave.darkstar@xxxxxxxxx>
• Re: [BUG] D state process after unplug and umount usb disk
  • From: Dave Young <hidave.darkstar@xxxxxxxxx>
• Re: [BUG] D state process after unplug and umount usb disk
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] s3c-hsudc: implement vbus_draw hook
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: HID device question.
  • From: "Chris Furlough" <chrisfurlough@xxxxxxxxxxx>
• Re: [BUG] D state process after unplug and umount usb disk
  • From: Lin Ming <mlin@xxxxxxxxxxxxx>
• Re: [BUG] D state process after unplug and umount usb disk
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] D state process after unplug and umount usb disk
  • From: Lin Ming <mlin@xxxxxxxxxxxxx>
• [PATCH] usb: Owen SI-30 support
  • From: Denis Pershin <dyp@xxxxxxxxxxxx>
• Re: [PATCH 1/1] drivers/net/usb/usbnet.c: No need for usb_free_urb in rx_complete
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] D state process after unplug and umount usb disk
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] drivers/net/usb/usbnet.c: No need for usb_free_urb in rx_complete
  • From: Kautuk Consul <consul.kautuk@xxxxxxxxx>
• Re: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] HID: usbhid: fix suspend timeout due to RUNNING bits
  • From: Benson Leung <bleung@xxxxxxxxxxxx>
• Re: [PATCH 091/115] ehci-msm : use ehci_setup
  • From: matthieu castet <castet.matthieu@xxxxxxx>
• Re: [PATCH 00/12] xHCI patches for 3.2
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] at91/usb: always provide all the clocks
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH 00/12] xHCI patches for 3.2
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 12/12] drivers/usb/host/xhci.c: Redundant check in xhci_check_args for xhci->devs
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 03/12] xhci: Refactor endpoint limit checking.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 08/12] xhci: Implement HS/FS/LS bandwidth checking.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 07/12] xhci: Track interval bandwidth tables per port/TT.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 11/12] xHCI: refine td allocation
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 02/12] xhci: Rename virt_dev->port to fake_port.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 10/12] xhci: Don't print short isoc packets.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 09/12] xhci: Add software BW checking quirk to Intel PPT xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 01/12] xhci: If no endpoints changed, don't issue BW command.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 06/12] xhci: Store endpoint bandwidth information.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 05/12] xhci: Store information about roothubs and TTs.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 04/12] xhci: Store the "real" root port number.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 00/12] xHCI patches for 3.2
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Stephen Warren <swarren@xxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Tirumala Marri <tmarri@xxxxxxx>
• RE: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Tirumala Marri <tmarri@xxxxxxx>
• Using USB_IP client with the Windows USP_IP implementation.
  • From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
• RE: [PATCH 6/6] usb: musb: Add support for ti81xx platform
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: ehci: remove wmb in qh_update
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Question about cables used with USB gadget HID work
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: ehci: remove wmb in qh_update
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Question about cables used with USB gadget HID work
  • From: Stephen P Welte <swelte1@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: ehci: remove wmb in qh_update
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/3] usb: ehci: remove wmb in qh_update
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Alexander Gordeev <lasaine@xxxxxxxxxxxxx>
• Re: [PATCH 14/14] arm/include/asm/io.h : added macros to read/write big/little endian register
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/14] dwc/otg: Add driver framework
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCH 6/6] usb: musb: Add support for ti81xx platform
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 03/14] dwc/otg: Add driver framework
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 01/14] dwc/otg: Add Register definitions
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCH 08/14] dwc/otg: Add PCD function
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCH 03/14] dwc/otg: Add driver framework
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Marc Dietich <marvin24@xxxxxx>
• Re: [PATCH] hidraw : free list for all error in hidraw_open
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 14/14] arm/include/asm/io.h : added macros to read/write big/little endian register
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 14/14] arm/include/asm/io.h : added macros to read/write big/little endian register
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH] hidraw : free list for all error in hidraw_open
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• Re: [PATCH] Fix for spurious interrupts on endpoint zero.
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: [PATCH] Fix for spurious interrupts on endpoint zero.
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• [PATCH] musb_gadget: Fix for spurious interrupts on endpoint zero.
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• [PATCH] hidraw : free list for all error in hidraw_open
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• Re: [PATCH 1/3] usb: ehci: remove wmb in qh_update
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] usb-storage: fix realtek cr configuration
  • From: edwin_rong <edwin_rong@xxxxxxxxxxxxxx>
• Re: [PATCH 091/115] ehci-msm : use ehci_setup
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] iPhone 4 Verizon CDMA USB Product ID add
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH] iPhone 4 Verizon CDMA USB Product ID add
  • From: Kavan Smith <kavansmith82@xxxxxxxxx>
• [PATCH] usb-storage: fix realtek cr configuration
  • From: Vincent Palatin <vpalatin@xxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Stephen Warren <swarren@xxxxxxxxxx>
• Re: [PATCH] usb/xhci: ignore xhci version while checking for the link quirk
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: ehci: fix comment for EHCI_SHRINK_JIFFIES
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 3.0.3 + Bluetooth USB Dongle: no success without noapic
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] g_printer: fix bug in unregistration
  • From: Fabian Godehardt <fg@xxxxxxxxx>
• Re: [PATCH] USB GADGET: u_serial.c: fixed a brace and whitespace coding style issue
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] Fix for spurious interrupts on endpoint zero.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 2/2] usb: dwc3: omap: do not enable DMA Disable Clear IRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] usb: dwc3: omap: fix dev_dbg() calls
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH 091/115] ehci-msm : use ehci_setup
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Marc Dietich <marvin24@xxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [RFC 06/17] usb/ehci: use platform helper in xilinx of
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 09/17] usb/ehci: add generic hcd add function
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: 3.0.3 + Bluetooth USB Dongle: no success without noapic
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: ehci: fix comment for EHCI_SHRINK_JIFFIES
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Josh Boyer <jwboyer@xxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 01/14] dwc/otg: Add Register definitions
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Greg KH <greg@xxxxxxxxx>
• Re: problems with usb 3.0 on clevo p150hm
  • From: Julian Sikorski <belegdol@xxxxxxxxx>
• Re: problems with usb 3.0 on clevo p150hm
  • From: Joshua Scoggins <theoretically.x64@xxxxxxxxx>
• Re: problems with usb 3.0 on clevo p150hm
  • From: Julian Sikorski <belegdol@xxxxxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/14] Modifications for DWC OTG since v13
  • From: Felipe Balbi <balbi@xxxxxx>
• problems with usb 3.0 on clevo p150hm
  • From: Julian Sikorski <belegdol@xxxxxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 06/20] usb: hcd-pci: introduce pm-ops for platform-pci devs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Mark Salter <msalter@xxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH 1/1] drivers/usb/host/xhci.c: Redundant check in xhci_check_args for xhci->devs
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Mark Salter <msalter@xxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• RE: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Tirumala Marri <tmarri@xxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Marc Dietrich <Marc.Dietrich@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC 06/17] usb/ehci: use platform helper in xilinx of
  • From: Jan Andersson <jan@xxxxxxxxxxx>
• Re: [PATCH 1/1] drivers/usb/host/xhci.c: Redundant check in xhci_check_args for xhci->devs
  • From: sifram rajas <sifram.rajas@xxxxxxxxx>
• Re: [RFC 09/17] usb/ehci: add generic hcd add function
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 06/17] usb/ehci: use platform helper in xilinx of
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• RE: HID device question.
  • From: Chris Furlough <chrisfurlough@xxxxxxxxxxx>
• Re: [PATCH 1/1] drivers/usb/host/xhci.c: Redundant check in xhci_check_args for xhci->devs
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/9 v2] xHCI: stop device only in U0 state
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH] usb/ehci: use of_read_ulong() in xilinx code
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] usb/xhci: ignore xhci version while checking for the link quirk
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: HID device question.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Mark Salter <msalter@xxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [RFT] usbcore: Bug fix: system can't suspend with USB3.0 device
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [RFC 06/17] usb/ehci: use platform helper in xilinx of
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• [PATCH] iPhone 4 Verizon CDMA USB Product ID add
  • From: Kavan Smith <kavansmith82@xxxxxxxxx>
• Re: [PATCH 3/3] usb: ehci: fix comment for EHCI_SHRINK_JIFFIES
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: ehci: only prepare zero packet for out transfer if required
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: ehci: remove wmb in qh_update
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: HID device question.
  • From: "Chris Furlough" <chrisfurlough@xxxxxxxxxxx>
• Re: HID device question.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFT] usbcore: Bug fix: system can't suspend with USB3.0 device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Mark Salter <msalter@xxxxxxxxxx>
• Re: [PATCH 0/6] DWC3: EP0 Handling rework
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/3] usb: ehci: fix comment for EHCI_SHRINK_JIFFIES
  • From: tom.leiming@xxxxxxxxx
• [PATCH 2/3] usb: ehci: only prepare zero packet for out transfer if required
  • From: tom.leiming@xxxxxxxxx
• [PATCH 1/3] usb: ehci: remove wmb in qh_update
  • From: tom.leiming@xxxxxxxxx
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• [PATCH 6/6] usb: dwc3: use ep0_next_event field
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/6] usb: dwc3: core: add ep0_next_event field
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/6] usb: dwc3: drop EP0_STALL state
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/6] usb: dwc3: ep0: clear all EP0 flags
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/6] usb: dwc3: ep0: fix Get Status handling
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/6] usb: dwc3: gadget: replace mdelay with udelay in the busy loop
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/6] DWC3: EP0 Handling rework
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/1] drivers/usb/host/xhci.c: Redundant check in xhci_check_args for xhci->devs
  • From: Sifram Rajas <sifram.rajas@xxxxxxxxx>
• [PATCH] USB GADGET: u_serial.c: fixed a brace and whitespace coding style issue
  • From: Shaun Kluzek <g0del@xxxxxxxxxxx>
• [PATCH] Fix for spurious interrupts on endpoint zero.
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: [PATCH] musb_debugfs.c: remove unneeded includes on ARM
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH 5/9 v2] xHCI: stop device only in U0 state
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH 08/14] dwc/otg: Add PCD function
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 14/14] arm/include/asm/io.h : added macros to read/write big/little endian register
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 03/14] dwc/otg: Add driver framework
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 00/14] Modifications for DWC OTG since v13
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCH] Increase usbfs bulk buffer size
  • From: Markus Rechberger <mrechberger@xxxxxxxxx>
• Re: [PATCH 00/14] Modifications for DWC OTG since v13
  • From: Alexander Gordeev <lasaine@xxxxxxxxxxxxx>
• Re: HID device question.
  • From: "Chris Furlough" <chrisfurlough@xxxxxxxxxxx>
• Re: [PATCH 00/14] Modifications for DWC OTG since v13
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• [PATCH] musb_debugfs.c: remove unneeded includes on ARM
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [RFT] usbcore: Bug fix: system can't suspend with USB3.0 device
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [RFT] usbcore: Bug fix: system can't suspend with USB3.0
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [RFT] usbcore: Bug fix: system can't suspend with USB3.0 device
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Mark Salter <msalter@xxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Mark Salter <msalter@xxxxxxxxxx>
• Re: [PATCH 5/9 v2] xHCI: stop device only in U0 state
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
  • From: ming.lei@xxxxxxxxxxxxx
• Re: [PATCH 00/14] Modifications for DWC OTG since v13
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCH 11/14] dwc/otg: Driver enable gadget support
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• RE: [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Tirumala Marri <tmarri@xxxxxxx>
• RE: [PATCH 00/14] Modifications for DWC OTG since v13
  • From: Tirumala Marri <tmarri@xxxxxxx>
• [PATCHv5.1 1/4] usb: Provide usb_speed_string() function
  • From: Michal Nazarewicz <mnazarewicz@xxxxxxxxxx>
• Re: [PATCH] usb/dwc3: replace mdelay with udelay in the busy loop
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB:add RESET_RESUME for webcams shown to be quirky
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 2/2] arm: omap: usb: Add mux initialization to ehci and ohci hwmods for omap3
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 0/2] omap: usb: I/O pads initialization to ehci and ohci hwmods
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 1/2] arm: omap: usb: Add mux initialization to ehci and ohci hwmods for omap4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: [PATCH v2] usbcore: refine warm reset logic
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 11/14] dwc/otg: Driver enable gadget support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 12/14] include/linux/usb/gadget.h : include <linux/device.h> for successful compilation
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 14/14] arm/include/asm/io.h : added macros to read/write big/little endian register
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 12/14] include/linux/usb/gadget.h : include <linux/device.h> for successful compilation
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 09/14] dwc/otg: Add PCD interrupt function
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 13/14] usb/gadget/kconfig: added dwc otg as an option for peripheral controller
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 11/14] dwc/otg: Driver enable gadget support
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 10/14] dwc/otg: Add driver kernel configuration and Makefile
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 06/14] dwc/otg: Add HCD interrupt function
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 04/14] dwc/otg: Add Core Interface Layer (CIL)
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 05/14] dwc/otg: Add HCD function
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 08/14] dwc/otg: Add PCD function
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 01/14] dwc/otg: Add Register definitions
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 03/14] dwc/otg: Add driver framework
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 07/14] dwc/otg: Add HCD queue function
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 02/14] dwc/otg: Structure declaration for shared data
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 00/14] Modifications for DWC OTG since v13
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• RE: [RFC PATCHv4 00/19] First round in OTG rework
  • From: Lin Tony-B19295 <B19295@xxxxxxxxxxxxx>
• Re: [RFC PATCHv4 00/19] First round in OTG rework
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• RE: [RFC PATCHv4 00/19] First round in OTG rework
  • From: Lin Tony-B19295 <B19295@xxxxxxxxxxxxx>
• Re: [PATCH] at91/usb: always provide all the clocks
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• [PATCH v2] usbcore: refine warm reset logic
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [RFC PATCHv4 00/19] First round in OTG rework
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/9 v2] xHCI: stop device only in U0 state
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH] usbcore: refine warm reset logic
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH 2/9 v2] usbcore: check device's LPM capability
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• RE: [RFC PATCHv4 00/19] First round in OTG rework
  • From: Lin Tony-B19295 <B19295@xxxxxxxxxxxxx>
• Re: [PATCH 5/5 v4] mfd: omap: usb: Runtime PM support
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: HID device question.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: HID device question.
  • From: "Chris Furlough" <chrisfurlough@xxxxxxxxxxx>
• Re: HID device question.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: HID device question.
  • From: "Chris Furlough" <chrisfurlough@xxxxxxxxxxx>
• [PATCH] at91/usb: always provide all the clocks
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH 2/9 v2] usbcore: check device's LPM capability
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usbcore: refine warm reset logic
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/5 v4] mfd: omap: usb: Runtime PM support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 5/9 v2] xHCI: stop device only in U0 state
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/5 v4] mfd: omap: usb: Runtime PM support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 5/5 v4] mfd: omap: usb: Runtime PM support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: usb_set_intfdata usage for two subdrivers
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH] Redundant check in xhci_check_args
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Mark Salter <msalter@xxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb/dwc3: replace mdelay with udelay in the busy loop
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH v2] sound: usb: mixer: increase control transfer timeout
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2] sound: usb: mixer: increase control transfer timeout
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: [PATCH] usbcore: refine warm reset logic
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] sound: usb: mixer: increase control transfer timeout
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2] sound: usb: mixer: increase control transfer timeout
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3] usb/dwc3: remove test mode in debugfs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 16/17] usb/ehci: use ehci_hcd_plat_probe_init() in sh
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 14/17] usb/hcd: add one-time init callback to usb_add_hcd()
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 17/17] usb/ehci: use ehci_hcd_plat_probe_init() in au1xxx
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v2 7/7] usb: dwc3: ep0: simplify EP0 state machine
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 6/7] usb: dwc3: core: add flag for EP0 direction
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 3/7] usb: dwc3: core: add defines for XferNotReady event on Control EPs
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 4/7] usb: dwc3: add a bounce buffer for control endpoints
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 2/7] usb: dwc3: gadget: improve command completion debug message
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 1/7] usb: dwc3: gadget: set request dma to invalid when unmapping
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 0/7] DWC3: control transfers rework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Problem with usb3 flash drive
  • From: jerome huang <jerome.syno@xxxxxxxxx>
• Re: [PATCH v2] sound: usb: mixer: increase control transfer timeout
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• [PATCH v2] sound: usb: mixer: increase control transfer timeout
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] sound: usb: mixer: increase control transfer timeout
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] sound: usb: mixer: increase control transfer timeout
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• [PATCH 3/3] usb: dwc3: rework the dequeue on RESET & DISCONNECT
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/3] usb/dwc3: move the core check before soft reset
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/3] usb/dwc3: remove test mode in debugfs
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] sound: usb: mixer: increase control transfer timeout
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] sound: usb: mixer: increase control transfer timeout
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] sound: usb: mixer: increase control transfer timeout
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH 4/4] usb: Introduce DesignWare USB3 DRD Driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC 17/17] usb/ehci: use ehci_hcd_plat_probe_init() in au1xxx
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC 09/17] usb/ehci: add generic hcd add function
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 16/17] usb/ehci: use ehci_hcd_plat_probe_init() in sh
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 16/17] usb/ehci: use ehci_hcd_plat_probe_init() in sh
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC 14/17] usb/hcd: add one-time init callback to usb_add_hcd()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC 09/17] usb/ehci: add generic hcd add function
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC 06/17] usb/ehci: use platform helper in xilinx of
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 06/17] usb/ehci: use platform helper in xilinx of
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• RE: [PATCH 6/6] usb: musb: Add support for ti81xx platform
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 17/17] usb/ehci: use ehci_hcd_plat_probe_init() in au1xxx
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH] usbcore: refine warm reset logic
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH] usb: gadget: audio: queue wLength-sized requests
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 7/7] usb: dwc3: ep0: simplify EP0 state machine
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 6/7] usb: dwc3: core: add flag for EP0 direction
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/7] usb: dwc3: ep0: add handling for unaligned OUT transfers
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/7] usb: dwc3: add a bounce buffer for control endpoints
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/7] usb: dwc3: core: add defines for XferNotReady event on Control EPs
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/7] usb: dwc3: gadget: improve command completion debug message
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/7] usb: dwc3: gadget: set request dma to invalid when unmapping
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/7] DWC3: control transfers rework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 17/17] usb/ehci: use ehci_hcd_plat_probe_init() in au1xxx
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH 6/6] usb: musb: Add support for ti81xx platform
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 17/17] usb/ehci: use ehci_hcd_plat_probe_init() in au1xxx
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 10/17] usb/ehci: make sh code use the new plat add code
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 09/17] usb/ehci: add generic hcd add function
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 08/17] usb/ehci: sh: move the clock init to the top
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 07/17] usb/ehci: use of_read_ulong() in xilinx code
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 02/17] usb/ehci: compile ehci-pci as a seperate compile unit
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 13/17] usb/ehci: Allow to build multiple platform glue drivers at the same time
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RFC 17/17] usb/ehci: use ehci_hcd_plat_probe_init() in au1xxx
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 10/17] usb/ehci: make sh code use the new plat add code
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 09/17] usb/ehci: add generic hcd add function
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 08/17] usb/ehci: sh: move the clock init to the top
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 07/17] usb/ehci: use of_read_ulong() in xilinx code
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 02/17] usb/ehci: compile ehci-pci as a seperate compile unit
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC 13/17] usb/ehci: Allow to build multiple platform glue drivers at the same time
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• RE: [PATCH 6/6] usb: musb: Add support for ti81xx platform
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: usb_set_intfdata usage for two subdrivers
  • From: Antti Palosaari <crope@xxxxxx>
• Re: usb_set_intfdata usage for two subdrivers
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• usb_set_intfdata usage for two subdrivers
  • From: Antti Palosaari <crope@xxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [RFC 01/17] usb/ehci: rename the ehci-hcd to ehci
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 13/17] usb/ehci: Allow to build multiple platform glue drivers at the same time
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 17/17] usb/ehci: use ehci_hcd_plat_probe_init() in au1xxx
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 16/17] usb/ehci: use ehci_hcd_plat_probe_init() in sh
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 15/17] usb/ehci-plat: use new usb_add_hcd_init()
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 14/17] usb/hcd: add one-time init callback to usb_add_hcd()
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 12/17] usb/ehci: make spear use generic platform add
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 11/17] usb/ehci: make au1xxx use generic add code
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 10/17] usb/ehci: make sh code use the new plat add code
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 09/17] usb/ehci: add generic hcd add function
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 08/17] usb/ehci: sh: move the clock init to the top
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 02/17] usb/ehci: compile ehci-pci as a seperate compile unit
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 07/17] usb/ehci: use of_read_ulong() in xilinx code
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 05/17] usb/ehci: compile xilinx-of as separate compile unit
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 06/17] usb/ehci: use platform helper in xilinx of
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 04/17] usb/ehci: compile ppc-of as a separate unit
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC 03/17] usb/ehci: compile ehci-ps3 as a separate compile unit
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [RFC] ehci registration rework
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• RE: [Libusb-devel] USB mini-summit report
  • From: "Michael Plante" <michael.plante@xxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] USB:add RESET_RESUME for webcams shown to be quirky
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB:add RESET_RESUME for webcams shown to be quirky
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH] usb: dwc3: gadget: improve command completion debug message
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Santosh <santosh.shilimkar@xxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: ehci: fix update qtd->token in qh_append_tds
  • From: Santosh <santosh.shilimkar@xxxxxx>