This core cannot handle OUT transfers which aren't
aligned to wMaxPacketSize, but that can happen at
least on control endpoint with the USB Audio Class.
This patch adds a bounce buffer to be used on the
case of a non-aligned ep0out request is queued.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/usb/dwc3/core.h | 6 ++++++
drivers/usb/dwc3/gadget.c | 29 ++++++++++++++++++++++-------
2 files changed, 28 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 08d8ff6..8688b5a 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -505,11 +505,13 @@ static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat)
* struct dwc3 - representation of our controller
* @ctrl_req: usb control request which is used for ep0
* @ep0_trb: trb which is used for the ctrl_req
+ * @ep0_bounce: bounce buffer for ep0
* @setup_buf: used while precessing STD USB requests
* @ctrl_req_addr: dma address of ctrl_req
* @ep0_trb: dma address of ep0_trb
* @ep0_usb_req: dummy req used while handling STD USB requests
* @setup_buf_addr: dma address of setup_buf
+ * @ep0_bounce_addr: dma address of ep0_bounce
* @lock: for synchronizing
* @dev: pointer to our struct device
* @event_buffer_list: a list of event buffers
@@ -522,6 +524,7 @@ static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat)
* @is_selfpowered: true when we are selfpowered
* @three_stage_setup: set if we perform a three phase setup
* @ep0_status_pending: ep0 status response without a req is pending
+ * @ep0_bounced: true when we used bounce buffer
* @ep0state: state of endpoint zero
* @link_state: link state
* @speed: device speed (super, high, full, low)
@@ -531,10 +534,12 @@ static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat)
struct dwc3 {
struct usb_ctrlrequest *ctrl_req;
struct dwc3_trb_hw *ep0_trb;
+ void *ep0_bounce;
u8 *setup_buf;
dma_addr_t ctrl_req_addr;
dma_addr_t ep0_trb_addr;
dma_addr_t setup_buf_addr;
+ dma_addr_t ep0_bounce_addr;
struct usb_request ep0_usb_req;
/* device lock */
spinlock_t lock;
@@ -564,6 +569,7 @@ struct dwc3 {
unsigned is_selfpowered:1;
unsigned three_stage_setup:1;
unsigned ep0_status_pending:1;
+ unsigned ep0_bounced:1;
enum dwc3_ep0_state ep0state;
enum dwc3_link_state link_state;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 56ccd97..569473b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1957,6 +1957,14 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
goto err2;
}
+ dwc->ep0_bounce = dma_alloc_coherent(dwc->dev,
+ 512, &dwc->ep0_bounce_addr, GFP_KERNEL);
+ if (!dwc->ep0_bounce) {
+ dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n");
+ ret = -ENOMEM;
+ goto err3;
+ }
+
dev_set_name(&dwc->gadget.dev, "gadget");
dwc->gadget.ops = &dwc3_gadget_ops;
@@ -1978,7 +1986,7 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
ret = dwc3_gadget_init_endpoints(dwc);
if (ret)
- goto err3;
+ goto err4;
irq = platform_get_irq(to_platform_device(dwc->dev), 0);
@@ -1987,7 +1995,7 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
if (ret) {
dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
irq, ret);
- goto err4;
+ goto err5;
}
/* Enable all but Start and End of Frame IRQs */
@@ -2006,27 +2014,31 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
if (ret) {
dev_err(dwc->dev, "failed to register gadget device\n");
put_device(&dwc->gadget.dev);
- goto err5;
+ goto err6;
}
ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
if (ret) {
dev_err(dwc->dev, "failed to register udc\n");
- goto err6;
+ goto err7;
}
return 0;
-err6:
+err7:
device_unregister(&dwc->gadget.dev);
-err5:
+err6:
dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
free_irq(irq, dwc);
-err4:
+err5:
dwc3_gadget_free_endpoints(dwc);
+err4:
+ dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
+ dwc->ep0_bounce_addr);
+
err3:
dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
dwc->setup_buf, dwc->setup_buf_addr);
@@ -2059,6 +2071,9 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
dwc3_gadget_free_endpoints(dwc);
+ dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
+ dwc->ep0_bounce_addr);
+
dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
dwc->setup_buf, dwc->setup_buf_addr);
--
1.7.6.396.ge0613
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
