Le 13/07/2011 11:29, Thomas Petazzoni : > The existing OHCI AT91 driver made the assumption that the enable > input of the USB power switch was active low. However, some USB power > switches such as the Micrel MIC2026-1 [1] have an active high input to > enable the power. A new vbus_pin_inverted attribute is added to the > at91_usbh_data structure so that board files can tell the OHCI driver > if the vbus pin logic is active low or active high. > > [1] http://www.micrel.com/page.do?page=product-info/products/mic2026.shtml > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> > Cc: Andrew Victor <linux@xxxxxxxxxxxx> > Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> > Cc: Jean-Christophe Plagniol-Villard <plagnioj@xxxxxxxxxxxx> > --- > arch/arm/mach-at91/include/mach/board.h | 1 + > drivers/usb/host/ohci-at91.c | 4 ++-- > 2 files changed, 3 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h > index ed544a0..61d52dc 100644 > --- a/arch/arm/mach-at91/include/mach/board.h > +++ b/arch/arm/mach-at91/include/mach/board.h > @@ -98,6 +98,7 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data); > struct at91_usbh_data { > u8 ports; /* number of ports on root hub */ > u8 vbus_pin[2]; /* port power-control pin */ > + u8 vbus_pin_inverted; > }; > extern void __init at91_add_device_usbh(struct at91_usbh_data *data); > extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); > diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c > index 944291e..3612ccd 100644 > --- a/drivers/usb/host/ohci-at91.c > +++ b/drivers/usb/host/ohci-at91.c > @@ -284,7 +284,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) > if (pdata->vbus_pin[i] <= 0) > continue; > gpio_request(pdata->vbus_pin[i], "ohci_vbus"); > - gpio_direction_output(pdata->vbus_pin[i], 0); > + gpio_direction_output(pdata->vbus_pin[i], pdata->vbus_pin_inverted); > } > } > > @@ -301,7 +301,7 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) > for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { > if (pdata->vbus_pin[i] <= 0) > continue; > - gpio_direction_output(pdata->vbus_pin[i], 1); > + gpio_direction_output(pdata->vbus_pin[i], !pdata->vbus_pin_inverted); > gpio_free(pdata->vbus_pin[i]); > } > } -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
