We read the DWC3_GSNPSID register to make sure we got the correct
register offset passed. One of the recent commits moved the soft reset
before this so in case of the wrong offset we end up with "reset timed
out". This patch moves the "id" check before the reset again.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
---
drivers/usb/dwc3/core.c | 19 +++++++++----------
1 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 443e4fb..6aa0913 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -241,6 +241,15 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
u32 reg;
int ret;
+ reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
+ /* This should read as U3 followed by revision number */
+ if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
+ dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
+ ret = -ENODEV;
+ goto err0;
+ }
+ dwc->revision = reg & DWC3_GSNPSREV_MASK;
+
dwc3_core_soft_reset(dwc);
/* issue device SoftReset too */
@@ -260,16 +269,6 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
cpu_relax();
} while (true);
- reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
- /* This should read as U3 followed by revision number */
- if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
- dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
- ret = -ENODEV;
- goto err0;
- }
-
- dwc->revision = reg & DWC3_GSNPSREV_MASK;
-
ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_NUM,
DWC3_EVENT_BUFFERS_SIZE);
if (ret) {
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
