I tested uPD720200"A" again with clean 3.1-rc3, the speed will be changed after every reboot: after 1st reboot: 480 after 2nd reboot: 5000 3rd: 480 4th: 5000 uPD720200"A" + clean 3.1-rc3 + 0001-xhci-Set-change-bit-when-warm-reset-change-is-set.patch: not work, the same symptom. uPD720200 + clean 3.1-rc3: no problem, always 5000 at 4 times reboot. It seems the NEC firmware's issue, I will report to NEC FAE, thanks for your help2. Thanks, Jerome On 27 August 2011 00:11, Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> wrote: > Hi Jerome, > > Can you try the attached patch? > > Sarah Sharp > > On Fri, Aug 26, 2011 at 06:45:16PM +0800, jerome huang wrote: >> I also want to confirm one thing: >> do you have 2nd or 3rd reboot with device connected? >> I found the speed is super in 1st reboot after I plugin the device and reboot, >> but it will be high in the subsequent reboot. >> >> Thanks, >> Jerome >> >> On 26 August 2011 18:34, jerome huang <jerome.syno@xxxxxxxxx> wrote: >> > I have uPD720200 adapter too, will try it with clean 3.1-rc3. >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
