When a transceiver is available use otg_set_power to submit
the target current to it.
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
drivers/usb/gadget/s3c-hsudc.c | 14 ++++++++++++++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 3e96cc5..8b6336d 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -1241,10 +1241,24 @@ static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget)
return s3c_hsudc_read_frameno(to_hsudc(gadget));
}
+static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+ struct s3c_hsudc *hsudc = the_controller;
+
+ if (!hsudc)
+ return -ENODEV;
+
+ if (hsudc->transceiver)
+ return otg_set_power(hsudc->transceiver, mA);
+
+ return -EOPNOTSUPP;
+}
+
static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
.get_frame = s3c_hsudc_gadget_getframe,
.start = s3c_hsudc_start,
.stop = s3c_hsudc_stop,
+ .vbus_draw = s3c_hsudc_vbus_draw,
};
static int s3c_hsudc_probe(struct platform_device *pdev)
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
