Now that the xHCI driver always return a status value of zero for isochronous URBs, when the last TD of an isochronous URB is short, the local variable "status" stays set to -EINPROGRESS. When xHCI driver debugging is turned on, this causes the log file to fill with messages like this: [ 38.859282] xhci_hcd 0000:00:14.0: Giveback URB ffff88013ad47800, len = 1408, expected = 580, status = -115 Don't print out the status of an URB for isochronous URBs. Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> --- drivers/usb/host/xhci-ring.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 58a6e26..d14f3fb 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2173,7 +2173,8 @@ cleanup: if ((urb->actual_length != urb->transfer_buffer_length && (urb->transfer_flags & URB_SHORT_NOT_OK)) || - status != 0) + (status != 0 && + !usb_endpoint_xfer_isoc(&urb->ep->desc))) xhci_dbg(xhci, "Giveback URB %p, len = %d, " "expected = %x, status = %d\n", urb, urb->actual_length, -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
