Linux Serial
[Prev Page][Next Page]
[PATCH v3] linux,stdout-path helper,
Sascha Hauer
[PATCH] serial: ifx6x60: Add module parameters to manage the modem status through sysfs.,
Jun Chen
[PATCH 1/2] moxa: dcd handling of CLOCAL is backwards,
Alan Cox
[PATCH -next] tty: of_serial: fix return value check in of_platform_serial_setup(),
Wei Yongjun
[PATCH 0/8] zynq COMMON_CLK support,
Josh Cartwright
[PATCH] serial:ifx6x60:Prevent data transfer when IFX6x60 port is shutdown,
chao bi
[tty:tty-next 70/71] drivers/tty/serial/serial_core.c:2369:2: warning: left shift count >= width of type,
kbuild test robot
drivers/tty/serial/8250/8250_early.c:160:18: error: 'BASE_BAUD' undeclared,
Fengguang Wu
[PATCH 1/3] uart: update the sysfs handler to use uart_get_info,
Alan Cox
[PATCH] jsm: Convert jsm_printk to jsm_dbg,
Joe Perches
[PATCH v7] serial/arc-uart: Add new driver,
Vineet.Gupta1
[GIT PATCH] TTY/Serial fix for 3.7-rc3,
Greg KH
[PATCH -next] 8250_pci: use module_pci_driver to simplify the code,
Wei Yongjun
[PATCH v6] serial/arc-uart: Add new driver,
Vineet.Gupta1
[PATCH v5] serial/arc-uart: Add new driver,
Vineet.Gupta1
[PATCH] n_gsm: prevent crash due to dereferencing NULL gsm->tty,
Guillaume Juan
tty/serial patch queue caught up on,
Greg KH
[PATCH 0/2] staging: dgrp: remove use of real_raw and read_cnt,
Bill Pemberton
[PATCH v4] serial/arc-uart: Add New Driver,
Vineet.Gupta1
[PATCH v2 0/3] serial: mxs-auart: add DMA support for auart in mx28,
Huang Shijie
[PATCH] serial:ifx6x60:different SPI word width configure requires different swap process,
chao bi
Re: [PATCH 0/1] staging: Add firewire-serial driver,
Peter Hurley
Subject: [PATCH] serial:ifx6x60:add swap_buf_32 function in case SPI word width is 32 bits,
chao bi
[tty:tty-next 17/23] drivers/staging/dgrp/dgrp_net_ops.c:229:8: error: 'struct tty_struct' has no member named 'read_cnt',
Fengguang Wu
[tty:tty-next 15/23] drivers/staging/dgrp/dgrp_net_ops.c:216:27: error: 'struct tty_struct' has no member named 'real_raw',
Fengguang Wu
[PATCH] serial: 8250 check iir rdi in interrupt,
Min Zhang
[PATCH] serial: ifx6x60: add_timer is not safe in the mrdy_assert function,
Jun Chen
[PATCH] tty: serial: KGDB support for PXA,
Haojian Zhuang
[GIT PATCH] TTY patches for 3.7-rc2,
Greg KH
[PATCH tty-next] x86: ce4100: allow second UART usage,
Florian Fainelli
[PATCH] serial: ifx6x60: del_timer_sync must not be called in interrupt context.,
Jun Chen
Re: [RESEND PATCH 2/2] Documentation: of-serial.txt - update for clocks phandle for clk,
Murali Karicheri
Re: [RESEND PATCH 1/2] of serial port driver - add clk_get_rate() support,
Murali Karicheri
[PATCH 0/3] serial: mxs-auart: add DMA support for auart in mx28,
Huang Shijie
[PATCH] serial/8250_hp300: Missing 8250 register interface conversion bits,
Geert Uytterhoeven
RE: [RESET PATCH 2/2] Documentation: of-serial.txt - update for clocks phandle for clk,
Karicheri, Muralidharan
[PATCH RESEND] serial/amba-pl011: use devm_* managed resources,
Linus Walleij
[PATCH] tty: serial: 8250_dw: Implement suspend/resume,
James Hogan
[PATCH 01/12] serial: clps711x: Add platform_driver interface to clps711x driver,
Alexander Shiyan
- [PATCH 02/12] serial: clps711x: Convert all static variables to dynamic,
Alexander Shiyan
- [PATCH 03/12] serial: clps711x: Do not use "uart_port->unused" field,
Alexander Shiyan
- [PATCH 04/12] serial: clps711x: Using CPU clock subsystem for getting base UART speed,
Alexander Shiyan
- [PATCH 05/12] serial: clps711x: Improved TX FIFO handling,
Alexander Shiyan
- [PATCH 06/12] serial: clps711x: Return valid modem controls for port that not support it,
Alexander Shiyan
- [PATCH 07/12] serial: clps711x: Fix break control handling,
Alexander Shiyan
- [PATCH 08/12] serial: clps711x: Check for valid TTY in RX-interrupt,
Alexander Shiyan
- [PATCH 09/12] serial: clps711x: Using resource-managed functions,
Alexander Shiyan
- [PATCH 10/12] serial: clps711x: Disable "break"-state before port startup,
Alexander Shiyan
- [PATCH 11/12] serial: clps711x: Fix TERMIOS-flags handling,
Alexander Shiyan
- [PATCH 12/12] serial: clps711x: Cleanup driver,
Alexander Shiyan
- Re: [PATCH 01/12] serial: clps711x: Add platform_driver interface to clps711x driver,
Arnd Bergmann
8250_early for big-endian,
Noam Camus
[PATCH] serial: clps711x: reworked driver version,
Alexander Shiyan
[RESEND PATCH v3] serial/arc-uart: Add new driver,
Vineet.Gupta1
New serial card development,
Matt Schulte
[PATCH v2] serial: vt8500: fix possible memory leak in vt8500_serial_probe(),
Wei Yongjun
[PATCH] serial: vt8500: fix possible memory leak in vt8500_serial_probe(),
Wei Yongjun
[tty:tty-next 9/39] drivers/staging/dgrp/dgrp_tty.c:3177 dgrp_tty_init() error: potential null dereference 'nd->nd_serial_ttdriver'.,
Fengguang Wu
[PATCH 3/6] tty: atmel_serial: switch pm ops,
Jean-Christophe PLAGNIOL-VILLARD
RE: PL2303 Driver Issue,
Reddy Kaveri, Praveen Kumar
[RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion,
Russell King - ARM Linux
- [RFC 02/24] SERIAL: omap: fix bit masks for software flow control,
Russell King
- [RFC 03/24] SERIAL: omap: remove setting of EFR SCD bit,
Russell King
- [RFC 04/24] SERIAL: omap: fix MCR TCRTLR bit handling,
Russell King
- [RFC 01/24] SERIAL: omap: fix set_mctrl() breakage,
Russell King
- [RFC 05/24] SERIAL: omap: no need to re-read EFR,
Russell King
- [RFC 06/24] SERIAL: omap: allow hardware assisted rts/cts modes to be disabled,
Russell King
- [RFC 07/24] SERIAL: omap: allow hardware assisted IXANY mode to be disabled,
Russell King
- [RFC 08/24] SERIAL: core: use local variable uport in uart_set_termios(),
Russell King
- [RFC 09/24] SERIAL: core: add hardware assisted s/w flow control support,
Russell King
- [RFC 10/24] SERIAL: core: add hardware assisted h/w flow control support,
Russell King
- [RFC 11/24] SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control,
Russell King
- [RFC 12/24] SERIAL: omap: fix hardware assisted flow control,
Russell King
- [RFC 13/24] SERIAL: omap: configure xon/xoff before setting modem control lines,
Russell King
- [RFC 14/24] SERIAL: omap: serial_omap_configure_xonxoff() contents into set_termios,
Russell King
- [RFC 15/24] SERIAL: omap: don't read back LCR/MCR/EFR,
Russell King
- [RFC 16/24] SERIAL: omap: simplify,
Russell King
- [RFC 17/24] SERIAL: omap: always set TCR,
Russell King
- [RFC 18/24] SERIAL: omap: move xon/xoff setting earlier,
Russell King
- [RFC 19/24] SERIAL: omap: simplify (2),
Russell King
- [RFC 20/24] SERIAL: core: add xmit buffer allocation callbacks,
Russell King
- [RFC 21/24] SERIAL: omap: use tx buffer allocation API,
Russell King
- [RFC 22/24] SERIAL: omap: typesafe conversion from uart_port to uart_omap_port,
Russell King
- [RFC 23/24] SERIAL: omap: move driver private definitions and structures to driver,
Russell King
- [RFC 24/24] SERIAL: omap: remove OMAP_UART_SYSC_RESET and OMAP_UART_FIFO_CLR,
Russell King
- Re: [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion,
Russell King - ARM Linux
- Re: [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion,
Russell King - ARM Linux
- Re: [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion,
Russell King - ARM Linux
- Re: [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion,
Alan Cox
- Re: [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion,
Sourav
[PATCH v2] Add of helper for linux,stdout-path,
Sascha Hauer
[PATCH 15/16] ARM: OMAP: Move plat/omap-serial.h to linux/platform_data/serial-omap.h,
Tony Lindgren
[PATCH] serial: i.MX: evaluate linux,stdout-path property,
Sascha Hauer
[PATCH v3] serial/arc-uart: Add new driver,
Vineet.Gupta1
[PATCH] tty/serial/8250: Make omap hardware workarounds local to 8250.h,
Tony Lindgren
[PATCH v3] serial/8250/8250_early: Prevent rounding error in uartclk,
Alexey Brodkin
[PATCH 1/3] serial: omap: Make context_loss_cnt signed,
Shubhrajyoti D
[PATCH] serial: samsung: use clk_prepare_enable and clk_disable_unprepare,
Thomas Abraham
[PATCH v2] serial/arc-uart: Add new driver,
Vineet.Gupta1
[GIT PATCH] TTY patches for 3.7-rc1,
Greg KH
[PATCH] serial: sccnxp: Allows the driver to be compiled as a module,
Alexander Shiyan
[PATCH v2] serial/8250/8250_early: Prevent rounding error in uartclk to baud ratio,
Alexey Brodkin
[PATCH] serial/arc-uart: Add new driver,
Vineet.Gupta1
[PATCH] tty/8250_early: Prevent rounding error in uartclk to baud ratio,
Alexey Brodkin
[tty:tty-next 36/40] kernel/debug/kdb/kdb_main.c:2839:4: warning: passing argument 2 of 'kdb_register_repeat' from incompatible pointer type,
Fengguang Wu
[PATCH v3] serial: pl011: handle corruption at high clock speeds,
Linus Walleij
[PATCH v2] serial: pl011: handle corruption at high clock speeds,
Linus Walleij
[PATCH v9 0/11] KGDB/KDB FIQ (NMI) debugger,
Anton Vorontsov
- [PATCH 01/11] kernel/debug: Mask KGDB NMI upon entry,
Anton Vorontsov
- [PATCH 02/11] kdb: Implement disable_nmi command,
Anton Vorontsov
- [PATCH 03/11] kdb: Turn KGDB_KDB=n stubs into static inlines,
Anton Vorontsov
- [PATCH 04/11] tty/serial/core: Introduce poll_init callback,
Anton Vorontsov
- [PATCH 06/11] tty/serial/amba-pl011: Quiesce interrupts in poll_get_char,
Anton Vorontsov
- [PATCH 07/11] tty/serial: Add kgdb_nmi driver,
Anton Vorontsov
- [PATCH 05/11] tty/serial/amba-pl011: Implement poll_init callback,
Anton Vorontsov
- [PATCH 08/11] ARM: Move some macros from entry-armv to entry-header,
Anton Vorontsov
- [PATCH 09/11] ARM: Add KGDB/KDB FIQ debugger generic code,
Anton Vorontsov
- [PATCH 11/11] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger,
Anton Vorontsov
- [PATCH 10/11] ARM: VIC: Add a couple of low-level FIQ management helpers,
Anton Vorontsov
- Re: [PATCH v9 0/11] KGDB/KDB FIQ (NMI) debugger,
Greg Kroah-Hartman
[PATCH 1/3] serial: sccnxp: Report actual baudrate back to core,
Alexander Shiyan
[PATCH] RFC: sched: Prevent wakeup to enter critical section needlessly,
Ivo Sieben
[PATCH] Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate,
Christophe Leroy
[PATCH] Powerpc 8xx CPM_UART maxidl should not depend on fifo size,
Christophe Leroy
[PATCH] Powerpc 8xx CPM_UART too many interrupts,
Christophe Leroy
[PATCH v2] Powerpc 8xx CPM_UART desynchronisation,
Christophe Leroy
[PATCH] serial: samsung: Add poll_get_char & poll_put_char,
Doug Anderson
[tty:tty-next 10/16] fs/compat_ioctl.c:869:1: error: 'TIOCSRS485' undeclared here (not in a function),
Fengguang Wu
[PATCH v2] serial: set correct baud_base for EXSYS EX-41092 Dual 16950,
Flavio Leitner
[PATCH] RFC: serial: pl011: allow very high baudrates,
Linus Walleij
[PATCH] serial: pl011: handle corruption at high clock speeds,
Linus Walleij
[PATCH v2] serial: omap: fix the reciever line error case,
Shubhrajyoti D
[PATCH] serial: omap: fix the overrun case,
Shubhrajyoti D
[RFC 0/3] Move some ARM header files to more appropriate locations,
Russell King - ARM Linux
[Resend/PATCHv2] serial: omap: Remove unnecessary checks from suspend/resume,
Sourav Poddar
[PATCHv2] serial: omap: Remove unnecessary checks from suspend/resume,
Sourav Poddar
Re: [PATCHv7 04/12] ARM: OMAP: hwmod: Add support for per hwmod/module context lost count,
Paul Walmsley
Re: [PATCH 3/3] serial: pl011: allow very high baudrates,
Russell King - ARM Linux
Re: [PATCH 1/3] serial: pl011: safeguard against impossible baudrates,
Russell King - ARM Linux
[PATCH] tty: Use raw spin lock to protect the TTY read section,
Ivo Sieben
[PATCH] tty: Use raw spin lock to protect RX flip buffer,
Ivo Sieben
[PATCH] tty: Use raw spin lock to protect TTY ldisc administration,
Ivo Sieben
[PATCH] tty: prevent unnecessary work queue lock checking on flip buffer copy,
Ivo Sieben
[PATCH] tty: cleanup duplicate functions in tty_buffer,
Ivo Sieben
[PATCH v8 0/11] KGDB/KDB FIQ (NMI) debugger,
Anton Vorontsov
- [PATCH 01/11] kernel/debug: Mask KGDB NMI upon entry,
Anton Vorontsov
- [PATCH 02/11] kdb: Implement disable_nmi command,
Anton Vorontsov
- [PATCH 03/11] kdb: Turn KGDB_KDB=n stubs into static inlines,
Anton Vorontsov
- [PATCH 04/11] tty/serial/core: Introduce poll_init callback,
Anton Vorontsov
- [PATCH 06/11] tty/serial/amba-pl011: Quiesce interrupts in poll_get_char,
Anton Vorontsov
- [PATCH 05/11] tty/serial/amba-pl011: Implement poll_init callback,
Anton Vorontsov
- [PATCH 07/11] tty/serial: Add kgdb_nmi driver,
Anton Vorontsov
- [PATCH 08/11] ARM: Move some macros from entry-armv to entry-header,
Anton Vorontsov
- [PATCH 10/11] ARM: VIC: Add a couple of low-level FIQ management helpers,
Anton Vorontsov
- [PATCH 11/11] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger,
Anton Vorontsov
- [PATCH 09/11] ARM: Add KGDB/KDB FIQ debugger generic code,
Anton Vorontsov
- Re: [PATCH v8 0/11] KGDB/KDB FIQ (NMI) debugger,
Jason Wessel
Vizzini,
Alan Cox
[PATCH] 8250: fix autoconfig to work with serial console,
Flavio Leitner
[RFT/PATCH] serial: omap: prevent resume if device is not suspended.,
Sourav Poddar
[PATCH] serial: omap: Remove unnecessary checks from suspend/resume,
Sourav Poddar
[PATCH 1/2] serial: imx: set sport as drvdata, like it's used elsewhere,
Richard Zhao
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Site Home]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]