On 10/31/2012 08:28 PM, Josh Cartwright wrote:
> Add support for specifying clock information for the uart clk via the
> device tree. This eliminates the need to hardcode rates in the device
> tree.
>
> Signed-off-by: Josh Cartwright <josh.cartwright@xxxxxx>
> ---
> arch/arm/boot/dts/zynq-7000.dtsi | 4 ++--
> drivers/tty/serial/xilinx_uartps.c | 30 +++++++++++++++++-------------
> 2 files changed, 19 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index bb3085c..5fb763f 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -44,14 +44,14 @@
> compatible = "xlnx,xuartps";
> reg = <0xE0000000 0x1000>;
> interrupts = <0 27 4>;
> - clock = <50000000>;
> + clocks = <&uart_clk 0>;
> };
>
> uart1: uart@e0001000 {
> compatible = "xlnx,xuartps";
> reg = <0xE0001000 0x1000>;
> interrupts = <0 50 4>;
> - clock = <50000000>;
> + clocks = <&uart_clk 0>;
Shouldn't this be <&uart_clk 1>?
> };
>
> slcr: slcr@f8000000 {
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
