maxidl register was set to fifo size. There is no reason to set this register to same value as fifo size. Setting it now to 0x10 by default as in the UCC UART driver. Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx> --- linux-3.5-vanilla/drivers/tty/serial/cpm_uart/cpm_uart_core.c 2012-07-21 22:58:29.000000000 +0200 +++ linux-3.5/drivers/tty/serial/cpm_uart/cpm_uart_core.c 2012-08-09 17:38:37.000000000 +0200 @@ -799,7 +799,7 @@ cpm_set_scc_fcr(sup); out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); - out_be16(&sup->scc_maxidl, pinfo->rx_fifosize); + out_be16(&sup->scc_maxidl, 0x10); out_be16(&sup->scc_brkcr, 1); out_be16(&sup->scc_parec, 0); out_be16(&sup->scc_frmec, 0); @@ -873,7 +873,7 @@ /* Using idle character time requires some additional tuning. */ out_be16(&up->smc_mrblr, pinfo->rx_fifosize); - out_be16(&up->smc_maxidl, pinfo->rx_fifosize); + out_be16(&up->smc_maxidl, 0x10); out_be16(&up->smc_brklen, 0); out_be16(&up->smc_brkec, 0); out_be16(&up->smc_brkcr, 1); -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
