Linux Serial

• Thread Index

• Re: [PATCH v4 4/4] arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
  • From: Geert Uytterhoeven
• Re: [linux-next:master] [serial] b63e6f60ea: BUG:soft_lockup-CPU##stuck_for#s![modprobe:#]
  • From: Petr Mladek
• [PATCH v1 6/6] serial: 8250_pnp: Remove unneeded ->iotype assignment
  • From: Andy Shevchenko
• [PATCH v1 3/6] serial: port: Make ->iotype validation global in __uart_read_properties()
  • From: Andy Shevchenko
• [PATCH v1 5/6] serial: 8250_platform: Remove unneeded ->iotype assignment
  • From: Andy Shevchenko
• [PATCH v1 2/6] serial: port: Always update ->iotype in __uart_read_properties()
  • From: Andy Shevchenko
• [PATCH v1 1/6] serial: port: Assign ->iotype correctly when ->iobase is set
  • From: Andy Shevchenko
• [PATCH v1 4/6] serial: 8250_of: Remove unneeded ->iotype assignment
  • From: Andy Shevchenko
• [PATCH v1 0/6] serial: port: Fix UPIO_PORT iotype handling
  • From: Andy Shevchenko
• Re: [linux-next:master] [serial] b63e6f60ea: BUG:soft_lockup-CPU##stuck_for#s![modprobe:#]
  • From: Petr Mladek
• Re: [PATCH v2 6/8] i2c: qcom-geni: Load i2c qup Firmware from linux side
  • From: Dmitry Baryshkov
• Re: [PATCH v2 6/8] i2c: qcom-geni: Load i2c qup Firmware from linux side
  • From: Viken Dadhaniya
• Re: [PATCH v2 2/8] dt-bindings: i2c: qcom,i2c-geni: Add support for selecting data transfer mode
  • From: Viken Dadhaniya
• Re: [PATCH v2] serial: 8250_mtk: Add ACPI support
  • From: Andy Shevchenko
• Re: [PATCH v2 6/8] i2c: qcom-geni: Load i2c qup Firmware from linux side
  • From: Dmitry Baryshkov
• Re: [PATCH v2 2/8] dt-bindings: i2c: qcom,i2c-geni: Add support for selecting data transfer mode
  • From: Dmitry Baryshkov
• Re: [PATCH v4 4/4] arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
  • From: Claudiu Beznea
• Re: [PATCH v4 4/4] arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
  • From: Geert Uytterhoeven
• Re: [PATCH v4 3/4] arm64: dts: renesas: rzg3s-smarc: Enable SCIF3
  • From: Geert Uytterhoeven
• Re: [PATCH v4 2/4] arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/8] dt-bindings: i2c: qcom,i2c-geni: Add support for selecting data transfer mode
  • From: Viken Dadhaniya
• Re: [PATCH v2 1/8] dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading
  • From: Viken Dadhaniya
• Re: [PATCH v2 2/8] dt-bindings: i2c: qcom,i2c-geni: Add support for selecting data transfer mode
  • From: Dmitry Baryshkov
• Re: [PATCH v2 1/8] dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading
  • From: Krzysztof Kozlowski
• [PATCH v2 5/8] soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
  • From: Viken Dadhaniya
• [PATCH v2 8/8] serial: qcom-geni: Load UART qup Firmware from linux side
  • From: Viken Dadhaniya
• [PATCH v2 7/8] spi: geni-qcom: Load spi qup Firmware from linux side
  • From: Viken Dadhaniya
• [PATCH v2 6/8] i2c: qcom-geni: Load i2c qup Firmware from linux side
  • From: Viken Dadhaniya
• Re: [PATCH v4 1/4] serial: sh-sci: Update the suspend/resume support
  • From: Geert Uytterhoeven
• [PATCH v2 4/8] dt-bindings: serial: Add support for selecting data transfer mode
  • From: Viken Dadhaniya
• [PATCH v2 2/8] dt-bindings: i2c: qcom,i2c-geni: Add support for selecting data transfer mode
  • From: Viken Dadhaniya
• [PATCH v2 3/8] spi: dt-bindings: Add support for selecting data transfer mode
  • From: Viken Dadhaniya
• [PATCH v2 0/8] Add support to load QUP SE firmware from
  • From: Viken Dadhaniya
• [PATCH v2 1/8] dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading
  • From: Viken Dadhaniya
• [PATCH v2] serial: 8250_mtk: Add ACPI support
  • From: Yenchia Chen
• urgent request for a quote
  • From: manuel . rodrigues
• [tty:tty-testing] BUILD SUCCESS f79b163c42314a1f46f4bcc40a19c8a75cf1e7a3
  • From: kernel test robot
• Re: [PATCH v1 0/7] Add support to load QUP SE firmware from
  • From: Mukesh Kumar Savaliya
• Re: [PATCH v1 0/7] Add support to load QUP SE firmware from
  • From: Caleb Connolly
• Re: Re: [PATCH v2] treewide: const qualify ctl_tables where applicable
  • From: Ard Biesheuvel
• Re: Re: [PATCH v2] treewide: const qualify ctl_tables where applicable
  • From: Joel Granados
• [PATCH 5.10] serial: imx: Introduce timeout when waiting on transmitter empty
  • From: Denis Arefev
• [syzbot] [serial?] possible deadlock in n_tty_flush_buffer
  • From: syzbot
• Re: [PATCH V4] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Krzysztof Kozlowski
• Re: [PATCH V4] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: wenhua lin
• Re: [PATCH v4 1/4] serial: sh-sci: Update the suspend/resume support
  • From: Claudiu Beznea
• Re: [linux-next:master] [serial] b63e6f60ea: BUG:soft_lockup-CPU##stuck_for#s![modprobe:#]
  • From: Greg Kroah-Hartman
• Re: [linux-next:master] [serial] b63e6f60ea: BUG:soft_lockup-CPU##stuck_for#s![modprobe:#]
  • From: John Ogness
• Re: [PATCH V4] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Krzysztof Kozlowski
• [PATCH V4] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Wenhua Lin
• Re: [PATCH] tty/ldsem: Remove unused ldsem_down_write_trylock
  • From: Jiri Slaby
• [linux-next:master] [serial] b63e6f60ea: BUG:soft_lockup-CPU##stuck_for#s![modprobe:#]
  • From: kernel test robot
• [PATCH] tty/ldsem: Remove unused ldsem_down_write_trylock
  • From: linux
• RE: [PATCH v2] serial: amba-pl011: Implement nbcon console
  • From: Toshiyuki Sato (Fujitsu)
• Re: [PATCH v2 0/2] serial: 8250: move mmp|pxa uart earlycon code and add xscale earlycon
  • From: Yixun Lan
• Re: [syzbot] [cgroups?] possible deadlock in console_lock_spinning_enable (5)
  • From: Michal Koutný
• Re: [PATCH v4] serial: sc16is7xx: Fix IRQ number check behavior
  • From: Hugo Villeneuve
• Re: [PATCH V3] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Rob Herring (Arm)
• Re: [PATCH v2] treewide: const qualify ctl_tables where applicable
  • From: Alexander Gordeev
• Re: [PATCH v4] serial: sc16is7xx: Fix IRQ number check behavior
  • From: Andy Shevchenko
• [PATCH V3] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Wenhua Lin
• Re: [PATCH V2] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: wenhua lin
• RE: [PATCH v4] serial: sc16is7xx: Fix IRQ number check behavior
  • From: Maarten Brock
• Re: [PATCH v4 1/4] serial: sh-sci: Update the suspend/resume support
  • From: Krzysztof Kozlowski
• Re: [PATCH v4] serial: sc16is7xx: Fix IRQ number check behavior
  • From: Jiri Slaby
• [PATCH v4] serial: sc16is7xx: Fix IRQ number check behavior
  • From: Andre Werner
• Re: [PATCH 1/2] dt-bindings: serial: 8250: Add Airoha compatibles
  • From: Krzysztof Kozlowski
• Re: [PATCH tty-next v5 5/6] serial: 8250: Switch to nbcon console
  • From: Thierry Reding
• Re: [PATCH tty-next v5 5/6] serial: 8250: Switch to nbcon console
  • From: Thierry Reding
• Re: [PATCH 1/2] dt-bindings: serial: 8250: Add Airoha compatibles
  • From: Benjamin Larsson
• Re: [PATCH v3] serial: sc16is7xx: Fix IRQ number check behavior
  • From: Hugo Villeneuve
• Re: [PATCH 1/2] dt-bindings: serial: 8250: Add Airoha compatibles
  • From: Krzysztof Kozlowski
• [PATCH v4 3/4] arm64: dts: renesas: rzg3s-smarc: Enable SCIF3
  • From: Claudiu
• [PATCH v4 4/4] arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
  • From: Claudiu
• [PATCH v4 2/4] arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches
  • From: Claudiu
• [PATCH v4 1/4] serial: sh-sci: Update the suspend/resume support
  • From: Claudiu
• [PATCH v4 0/4] Add support for the rest of Renesas RZ/G3S serial interfaces
  • From: Claudiu
• Re: [PATCH 1/2] dt-bindings: serial: 8250: Add Airoha compatibles
  • From: Benjamin Larsson
• Re: [PATCH 1/2] dt-bindings: serial: 8250: Add Airoha compatibles
  • From: Krzysztof Kozlowski
• Re: [PATCH V2] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Krzysztof Kozlowski
• [PATCH v3] serial: sc16is7xx: Fix IRQ number check behavior
  • From: Andre Werner
• Re: [PATCH] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Krzysztof Kozlowski
• Re: [syzbot] [serial?] possible deadlock in tty_buffer_flush (3)
  • From: syzbot
• Re: [PATCH] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: wenhua lin
• Re: [PATCH V2] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: wenhua lin
• [PATCH V2] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Wenhua Lin
• Re: [PATCH] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: wenhua lin
• [PATCH] tty: vt: make defkeymap for shifted F-keys consistent with kbd
  • From: Yury V. Zaytsev
• [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: Benjamin Larsson
• [PATCH 1/2] dt-bindings: serial: 8250: Add Airoha compatibles
  • From: Benjamin Larsson
• [PATCH v3 0/2] Airoha UART support
  • From: Benjamin Larsson
• Re: [External Email] RE: [PATCH v2] serial: sc16is7xx: Extend IRQ check for negative values
  • From: Jiri Slaby
• Re: [External Email] Re: [PATCH v2] serial: sc16is7xx: Extend IRQ check for negative values
  • From: Greg KH
• Re: [External Email] Re: [PATCH v2] serial: sc16is7xx: Extend IRQ check for negative values
  • From: Andre Werner
• Re: [syzbot] [serial?] possible deadlock in tty_buffer_flush (3)
  • From: syzbot
• Re: [External Email] RE: [PATCH v2] serial: sc16is7xx: Extend IRQ check for negative values
  • From: Andre Werner
• [tty:tty-testing] BUILD SUCCESS 651dee03696e1dfde6d9a7e8664bbdcd9a10ea7f
  • From: kernel test robot
• RE: [PATCH v2] serial: sc16is7xx: Extend IRQ check for negative values
  • From: Maarten Brock
• Re: [PATCH v2] serial: sc16is7xx: Extend IRQ check for negative values
  • From: Jiri Slaby
• Re: [PATCH v2] serial: sc16is7xx: Extend IRQ check for negative values
  • From: Greg KH
• [PATCH v2] serial: sc16is7xx: Extend IRQ check for negative values
  • From: Andre Werner
• [PATCH v1 1/1] serial: pch_uart: Remove legacy PM hook
  • From: Andy Shevchenko
• [PATCH v1 1/1] serial: mpc52xx_uart: Remove legacy PM hook
  • From: Andy Shevchenko
• Re: [External Email] Re: [PATCH v7] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Greg KH
• Re: [External Email] Re: [PATCH v7] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andre Werner
• Re: [syzbot] [cgroups?] possible deadlock in console_lock_spinning_enable (5)
  • From: syzbot
• Re: [PATCH v2] serial: amba-pl011: Implement nbcon console
  • From: Greg Kroah-Hartman
• Re: [PATCH v7] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Greg KH
• [syzbot] Monthly serial report (Jan 2025)
  • From: syzbot
• [PATCH 2/2] tty: Change order of ttynull to be loaded sooner.
  • From: adamsimonelli
• [PATCH 1/2] ttynull: Add an option to allow ttynull to be used as a console device
  • From: adamsimonelli
• [PATCH 0/2] Optionally allow ttynull to be selected as a default console
  • From: adamsimonelli
• [PATCH 5/5] serial: sh-sci: Increment the runtime usage counter for the earlycon device
  • From: Claudiu
• [PATCH 4/5] serial: sh-sci: Clean sci_ports[0] after at earlycon exit
  • From: Claudiu
• [PATCH 3/5] serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use
  • From: Claudiu
• [PATCH 2/5] serial: sh-sci: Move runtime PM enable to sci_probe_single()
  • From: Claudiu
• [PATCH 1/5] serial: sh-sci: Drop __initdata macro for port_cfg
  • From: Claudiu
• [PATCH 0/5] serial: sh-sci: Fixes for earlycon and keep_bootcon
  • From: Claudiu
• Re: [PATCH v1] serial: sc16is7xx: Extend IRQ check for negative valus
  • From: Andy Shevchenko
• Re: [PATCH 1/1] tty: serial: handle HAS_IOPORT dependencies
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250_mtk: Add ACPI support
  • From: Jonathan Cameron
• Re: [PATCH v1] serial: sc16is7xx: Extend IRQ check for negative valus
  • From: Andy Shevchenko
• Re: [External Email] Re: [PATCH v1] serial: sc16is7xx: Extend IRQ check for negative valus
  • From: Andy Shevchenko
• Re: [PATCH tty-next v5 5/6] serial: 8250: Switch to nbcon console
  • From: Jon Hunter
• Re: [PATCH tty-next v5 5/6] serial: 8250: Switch to nbcon console
  • From: John Ogness
• Re: [PATCH tty-next v5 5/6] serial: 8250: Switch to nbcon console
  • From: Jon Hunter
• Re: [PATCH v1] serial: sc16is7xx: Extend IRQ check for negative valus
  • From: Jiri Slaby
• Re: [External Email] Re: [PATCH v1] serial: sc16is7xx: Extend IRQ check for negative valus
  • From: Jiri Slaby
• Re: [PATCH v1] serial: sc16is7xx: Extend IRQ check for negative valus
  • From: Andy Shevchenko
• Re: [External Email] Re: [PATCH v1] serial: sc16is7xx: Extend IRQ check for negative valus
  • From: Andre Werner
• Re: [PATCH v1] serial: sc16is7xx: Extend IRQ check for negative valus
  • From: Jiri Slaby
• [PATCH v1] serial: sc16is7xx: Extend IRQ check for negative valus
  • From: Andre Werner
• Re: [PATCH v7] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andy Shevchenko
• Re: [PATCH v7] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andy Shevchenko
• Re: [PATCH v7] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andre Werner
• [PATCH v7] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andre Werner
• Re: [PATCH] serial: 8250_mtk: Add ACPI support
  • From: Yenchia Chen
• Re: [PATCH] serial: 8250_mtk: Add ACPI support
  • From: kernel test robot
• Re: [PATCH v2] treewide: const qualify ctl_tables where applicable
  • From: Bill O'Donnell
• Re: [PATCH v2] treewide: const qualify ctl_tables where applicable
  • From: Wei Liu
• Re: [PATCH] serial: 8250_mtk: Add ACPI support
  • From: kernel test robot
• Re: [PATCH v2] treewide: const qualify ctl_tables where applicable
  • From: Thomas Gleixner
• Re: [PATCH tty-next v5 5/6] serial: 8250: Switch to nbcon console
  • From: John Ogness
• Re: [PATCH tty-next v5 5/6] serial: 8250: Switch to nbcon console
  • From: Jon Hunter
• Re: [External Email] Re: [PATCH v7 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andy Shevchenko
• Re: [PATCH v2 2/3] sysctl: Fix underflow value setting risk in vm_table
  • From: Nicolas Bouchinet
• [PATCH v2] serial: amba-pl011: Implement nbcon console
  • From: Toshiyuki Sato
• Re: [External Email] Re: [PATCH v7 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andre Werner
• RE: [PATCH] serial: amba-pl011: Implement nbcon console
  • From: Toshiyuki Sato (Fujitsu)
• Re: [PATCH v3 3/3] kgdb: Add command linux.vmcoreinfo to kgdb
  • From: Stephen Brennan
• Re: [PATCH v7 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andy Shevchenko
• Re: [PATCH] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Krzysztof Kozlowski
• Re: [PATCH] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Krzysztof Kozlowski
• Re: [PATCH] serial: 8250_mtk: Add ACPI support
  • From: Jiri Slaby
• Re: [PATCH] serial: 8250_mtk: Add ACPI support
  • From: Jiri Slaby
• [PATCH v7 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andre Werner
• [PATCH v7 1/2] dt-bindings: serial: sc16is7xx: Add description for polling mode
  • From: Andre Werner
• [PATCH] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Wenhua Lin
• [PATCH] serial: 8250_mtk: Add ACPI support
  • From: Yenchia Chen
• Re: [PATCH V2 2/2] serial: sprd: Add support for sc9632
  • From: wenhua lin
• Re: [PATCH V2 2/2] serial: sprd: Add support for sc9632
  • From: wenhua lin
• Re: [PATCH v3 2/3] kgdb: Add command linux.vmcoreinfo to kgdb
  • From: Stephen Brennan
• Re: [PATCH v3 3/3] kgdb: Add command linux.vmcoreinfo to kgdb
  • From: Stephen Brennan
• Re: [PATCH] serial: kgdb_nmi: Remove unused knock code
  • From: Doug Anderson
• Re: [PATCH v3 2/3] serial: Move LF -> CRLF replacement from serial console to kdb
  • From: Stephen Brennan
• Re: [PATCH v3 1/3] kgdb: Add kgdb_mem2ebin function for converting memory to binary format
  • From: Stephen Brennan
• [tty:tty-testing] BUILD SUCCESS 2f83e38a095f8bf7c6029883d894668b03b9bd93
  • From: kernel test robot
• [PATCH v3 2/3] serial: Move LF -> CRLF replacement from serial console to kdb
  • From: Amal Raj T
• [PATCH v3 2/3] kgdb: Add command linux.vmcoreinfo to kgdb
  • From: Amal Raj T
• [PATCH v3 3/3] kgdb: Add command linux.vmcoreinfo to kgdb
  • From: Amal Raj T
• [PATCH v3 1/3] kgdb: Add kgdb_mem2ebin function for converting memory to binary format
  • From: Amal Raj T
• [PATCH v3 0/3] Add a new command in kgdb for vmcoreinfo
  • From: Amal Raj T
• Re: KGDB/KDB running over internet as serial connection isn't possible
  • From: Stephen Brennan
• Re: [PATCH] serial: 8250_it8768e: Create iTE IT8768E specific 8250 driver
  • From: Andy Shevchenko
• Re: [PATCH v5 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Hugo Villeneuve
• KGDB/KDB running over internet as serial connection isn't possible
  • From: Muhammad Usama Anjum
• Re: [PATCH] serial: 8250_it8768e: Create iTE IT8768E specific 8250 driver
  • From: Arnd Bergmann
• Re: [External Email] Re: [PATCH v6 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andy Shevchenko
• Re: [External Email] Re: [PATCH v6 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andre Werner
• Re: [PATCH v6 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250_it8768e: Create iTE IT8768E specific 8250 driver
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250_it8768e: Create iTE IT8768E specific 8250 driver
  • From: Arnd Bergmann
• Re: [PATCH] serial: 8250_it8768e: Create iTE IT8768E specific 8250 driver
  • From: Andy Shevchenko
• Re: [PATCH tty-next v5 2/6] serial: 8250: Use frame time to determine timeout
  • From: Andy Shevchenko
• Re: [PATCH V2 1/2] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Krzysztof Kozlowski
• Re: [PATCH 2/2] dt-bindings: serial: Add a new compatible string for ums9632
  • From: Krzysztof Kozlowski
• [PATCH v6 1/2] dt-bindings: serial: sc16is7xx: Add description for polling mode
  • From: Andre Werner
• [PATCH v6 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andre Werner
• Re: [PATCH V2 2/2] serial: sprd: Add support for sc9632
  • From: Chunyan Zhang
• Re: [PATCH V2 0/2] serial: sprd: Modification of UNISOC Platform UART Driver
  • From: Baolin Wang
• Re: [PATCH V2 2/2] serial: sprd: Add support for sc9632
  • From: Baolin Wang
• [PATCH V2 1/2] dt-bindings: serial: Add a new compatible string for UMS9632
  • From: Wenhua Lin
• [PATCH V2 2/2] serial: sprd: Add support for sc9632
  • From: Wenhua Lin
• [PATCH V2 0/2] serial: sprd: Modification of UNISOC Platform UART Driver
  • From: Wenhua Lin
• [tty:tty-testing] BUILD SUCCESS 41971e39d3dd7c295133bfd338247dc6a5de32bf
  • From: kernel test robot
• Re: [PATCH 2/2] dt-bindings: serial: Add a new compatible string for ums9632
  • From: wenhua lin
• Re: [PATCH 2/2] dt-bindings: serial: Add a new compatible string for ums9632
  • From: wenhua lin
• Re: [GIT PULL] Serial driver fixes for 6.13-rc7
  • From: pr-tracker-bot
• [GIT PULL] Serial driver fixes for 6.13-rc7
  • From: Greg KH
• [PATCH] serial: kgdb_nmi: Remove unused knock code
  • From: linux
• Re: [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: kernel test robot
• Re: [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: kernel test robot
• Re: [PATCH v2] treewide: const qualify ctl_tables where applicable
  • From: Baoquan He
• [tty:tty-testing] BUILD SUCCESS 422c9727b07f9f86e2ec11c56622e566221591cc
  • From: kernel test robot
• Re: [PATCH 1/2] dt-bindings: serial: 8250: Add Airoha compatibles
  • From: Benjamin Larsson
• Re: [PATCH 1/2] dt-bindings: serial: 8250: Add Airoha compatibles
  • From: Krzysztof Kozlowski
• [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: Benjamin Larsson
• [PATCH 1/2] dt-bindings: serial: 8250: Add Airoha compatibles
  • From: Benjamin Larsson
• [PATCH v2 0/2] Airoha UART support
  • From: Benjamin Larsson
• RE: [PATCH] tty: mips_ejtag_fdc: Fix another passing incompatible pointer type warning
  • From: kexybiscuit
• Re: [PATCH] tty: xilinx_uartps: split sysrq handling
  • From: John Ogness
• Re: [PATCH] tty: mips_ejtag_fdc: Fix another passing incompatible pointer type warning
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: 8250_it8768e: Create iTE IT8768E specific 8250 driver
  • From: kernel test robot
• [PATCH] tty: xilinx_uartps: split sysrq handling
  • From: Sean Anderson
• Re: [PATCH v2] treewide: const qualify ctl_tables where applicable
  • From: Anna Schumaker
• [PATCH] tty: mips_ejtag_fdc: Fix another passing incompatible pointer type warning
  • From: Kexy Biscuit
• Re: [PATCH] treewide: const qualify ctl_tables where applicable
  • From: Dixit, Ashutosh
• [PATCH v6 2/3] dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
  • From: Ryan.Wanner
• [PATCH v6 1/3] dt-bindings: serial: atmel,at91-usart: add microchip,sama7d65-usart
  • From: Ryan.Wanner
• [PATCH v6 0/3] Add support for SAMA7D65
  • From: Ryan.Wanner
• [PATCH v6 3/3] dt-bindings: mfd: atmel,sama5d2-flexcom: add microchip,sama7d65-flexcom
  • From: Ryan.Wanner
• Re: [PATCH] serial: amba-pl011: Implement nbcon console
  • From: 'Greg Kroah-Hartman'
• Re: [PATCH 1/1] tty: respond to TIOCGWINSZ when hung
  • From: Greg Kroah-Hartman
• [PATCH v2] treewide: const qualify ctl_tables where applicable
  • From: Joel Granados
• [PATCH] tty: mips_ejtag_fdc: fix one more u8 warning
  • From: Jiri Slaby (SUSE)
• Re: [PATCH] tty: atmel_serial: Use of_property_present() for non-boolean properties
  • From: Nicolas Ferre
• Re: [PATCH v2 00/17] rockchip: Add rk3562 support
  • From: Kever Yang
• Re: [PATCH] tty: atmel_serial: Use of_property_present() for non-boolean properties
  • From: Richard GENOUD
• [PATCH v5 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andre Werner
• [PATCH v5 1/2] dt-bindings: serial: sc16is7xx: Add description for polling mode
  • From: Andre Werner
• Re: [PATCH v1 0/7] Add support to load QUP SE firmware from
  • From: Mukesh Kumar Savaliya
• [PATCH] tty: atmel_serial: Use of_property_present() for non-boolean properties
  • From: Rob Herring (Arm)
• Re: [PATCH] treewide: const qualify ctl_tables where applicable
  • From: Song Liu
• Re: [PATCH tty-next v5 6/6] serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()"
  • From: Petr Mladek
• Re: [PATCH tty-next v5 5/6] serial: 8250: Switch to nbcon console
  • From: Petr Mladek
• Re: [PATCH] serial: amba-pl011: Implement nbcon console
  • From: kernel test robot
• Re: [PATCH] serial: amba-pl011: Implement nbcon console
  • From: kernel test robot
• Re: [PATCH] treewide: const qualify ctl_tables where applicable
  • From: Darrick J. Wong
• Re: [PATCH] treewide: const qualify ctl_tables where applicable
  • From: Corey Minyard
• Re: [PATCH] treewide: const qualify ctl_tables where applicable
  • From: Martin K. Petersen
• Re: [PATCH] treewide: const qualify ctl_tables where applicable
  • From: Jani Nikula
• Re: [PATCH] treewide: const qualify ctl_tables where applicable
  • From: Steven Rostedt
• Re: [PATCH v4 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Hugo Villeneuve
• [PATCH] treewide: const qualify ctl_tables where applicable
  • From: Joel Granados
• Re: [PATCH] serial: 8250_it8768e: Create iTE IT8768E specific 8250 driver
  • From: Arnd Bergmann
• [PATCH] serial: 8250_it8768e: Create iTE IT8768E specific 8250 driver
  • From: WangYuli
• [PATCH v4 2/2] serial: sc16is7xx: Add polling mode if no IRQ pin is available
  • From: Andre Werner
• [PATCH v4 1/2] dt-bindings: serial: sc16is7xx: Add description for polling mode
  • From: Andre Werner
• Re: [PATCH v5 3/5] dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
  • From: Claudiu Beznea
• Re: [PATCH v5 0/5] Add support for SAMA7D65
  • From: Claudiu Beznea
• Re: [PATCH v5 5/5] ARM: dts: microchip: add support for sama7d65_curiosity board
  • From: Claudiu Beznea
• Re: [PATCH v5 4/5] ARM: dts: microchip: add sama7d65 SoC DT
  • From: Claudiu Beznea
• RE: [PATCH] tty: serial: fsl_lpuart: flush RX and TX FIFO when lpuart shutdown
  • From: Sherry Sun
• RE: [PATCH] serial: amba-pl011: Implement nbcon console
  • From: Toshiyuki Sato (Fujitsu)
• [no subject]
  • From: Unknown
• Re: [PATCH v3 2/2] serial: sc16is7xx: Add polling feature if no IRQ usage possible
  • From: Hugo Villeneuve
• Re: [PATCH] tty: serial: fsl_lpuart: flush RX and TX FIFO when lpuart shutdown
  • From: Frank Li
• Re: [PATCH v3 2/3] mfd: at91-usart: make it selectable for ARCH_LAN969X
  • From: Daniel Machon
• Re: [PATCH v3 1/3] arm64: lan969x: Add support for Microchip LAN969x SoC
  • From: Daniel Machon
• [PATCH v3 3/3] tty: serial: atmel: make it selectable for ARCH_LAN969X
  • From: Robert Marko
• [PATCH v3 2/3] mfd: at91-usart: make it selectable for ARCH_LAN969X
  • From: Robert Marko
• [PATCH v3 1/3] arm64: lan969x: Add support for Microchip LAN969x SoC
  • From: Robert Marko
• Re: Precise timing in ldisc? tty_put_char() in hrtimer context?
  • From: Theodore Ts'o
• Re: [PATCH v2 1/3] kgdb: Add kgdb_mem2ebin function for converting memory to binary format
  • From: Daniel Thompson
• Re: [PATCH] serial: amba-pl011: Implement nbcon console
  • From: Greg Kroah-Hartman
• [tty:tty-testing] BUILD SUCCESS 4a495b97b273fee77a8d77c579ebdd0d0d77f87c
  • From: kernel test robot
• RE: [PATCH] tty: serial: fsl_lpuart: flush RX and TX FIFO when lpuart shutdown
  • From: Sherry Sun
• [PATCH] serial: amba-pl011: Implement nbcon console
  • From: Toshiyuki Sato
• Re: [PATCH v5 0/5] Add support for SAMA7D65
  • From: Rob Herring (Arm)
• [PATCH tty-next v5 5/6] serial: 8250: Switch to nbcon console
  • From: John Ogness
• [PATCH tty-next v5 6/6] serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()"
  • From: John Ogness
• [PATCH tty-next v5 4/6] serial: 8250: Provide flag for IER toggling for RS485
  • From: John Ogness
• [PATCH tty-next v5 3/6] serial: 8250: Use high-level writing function for FIFO
  • From: John Ogness
• [PATCH tty-next v5 2/6] serial: 8250: Use frame time to determine timeout
  • From: John Ogness
• [PATCH tty-next v5 1/6] serial: 8250: Adjust the timeout for FIFO mode
  • From: John Ogness
• [PATCH tty-next v5 0/6] convert 8250 to nbcon
  • From: John Ogness
• Re: Precise timing in ldisc? tty_put_char() in hrtimer context?
  • From: Tomáš Mudruňka
• Re: Precise timing in ldisc? tty_put_char() in hrtimer context?
  • From: Greg KH
• Precise timing in ldisc? tty_put_char() in hrtimer context?
  • From: Tomáš Mudruňka
• [PATCH v5 4/5] ARM: dts: microchip: add sama7d65 SoC DT
  • From: Ryan.Wanner
• [PATCH v5 5/5] ARM: dts: microchip: add support for sama7d65_curiosity board
  • From: Ryan.Wanner
• [PATCH v5 3/5] dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
  • From: Ryan.Wanner
• [PATCH v5 1/5] dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity
  • From: Ryan.Wanner
• [PATCH v5 2/5] dt-bindings: serial: atmel,at91-usart: add microchip,sama7d65-usart
  • From: Ryan.Wanner
• [PATCH v5 0/5] Add support for SAMA7D65
  • From: Ryan.Wanner
• Re: [PATCH] tty: serial: fsl_lpuart: flush RX and TX FIFO when lpuart shutdown
  • From: Frank Li
• [PATCH v3 2/2] serial: sc16is7xx: Add polling feature if no IRQ usage possible
  • From: Andre Werner
• [PATCH v3 1/2] dt-bindings: serial: sc16is7xx: Add description for polling mode
  • From: Andre Werner
• Re: [External Email] Re: [PATCH v2 1/2] dt-bindings: serial: sc16is7xx: Add description for polling mode
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/1] tty: respond to TIOCGWINSZ when hung
  • From: Gil Pedersen
• Re: [PATCH v1 0/7] Add support to load QUP SE firmware from
  • From: Caleb Connolly
• Re: [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: Greg KH
• RE: [PATCH] tty: serial: fsl_lpuart: increase maximum uart_nr to 12
  • From: Sherry Sun
• Re: [External Email] Re: [PATCH v2 1/2] dt-bindings: serial: sc16is7xx: Add description for polling mode
  • From: Andre Werner
• Re: [PATCH] tty: serial: fsl_lpuart: increase maximum uart_nr to 12
  • From: Greg KH
• RE: [PATCH] tty: serial: fsl_lpuart: increase maximum uart_nr to 12
  • From: Sherry Sun
• RE: [PATCH] tty: serial: fsl_lpuart: increase maximum uart_nr to 12
  • From: Sherry Sun
• [PATCH] tty: serial: fsl_lpuart: flush RX and TX FIFO when lpuart shutdown
  • From: Sherry Sun
• Re: [PATCH v2 1/2] dt-bindings: serial: sc16is7xx: Add description for polling mode
  • From: Krzysztof Kozlowski
• Re: [PATCH tty-next v4 5/6] serial: 8250: Switch to nbcon console
  • From: Petr Mladek
• Re: [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: Benjamin Larsson
• Re: [PATCH tty-next v4 4/6] serial: 8250: Provide flag for IER toggling for RS485
  • From: Petr Mladek
• Re: [PATCH] tty: serial: fsl_lpuart: increase maximum uart_nr to 12
  • From: Greg KH
• Re: [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: Benjamin Larsson
• RE: [PATCH] tty: serial: fsl_lpuart: increase maximum uart_nr to 12
  • From: Sherry Sun
• [PATCH v2 2/2] serial: sc16is7xx: Add polling feature if no IRQ usage possible
  • From: Andre Werner
• [PATCH v2 1/2] dt-bindings: serial: sc16is7xx: Add description for polling mode
  • From: Andre Werner
• Re: [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: Greg KH
• Re: [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/2] dt-bindings: serial: 8250: Add Airoha compatibles
  • From: Krzysztof Kozlowski
• Re: [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: Benjamin Larsson
• Re: [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: Greg KH
• [PATCH 2/2] serial: Airoha SoC UART and HSUART support
  • From: Benjamin Larsson
• [PATCH 0/2] Airoha UART support
  • From: Benjamin Larsson
• [PATCH 1/2] dt-bindings: serial: 8250: Add Airoha compatibles
  • From: Benjamin Larsson
• Re: [PATCH tty-next v4 5/6] serial: 8250: Switch to nbcon console
  • From: John Ogness
• Re: [PATCH tty-next v4 4/6] serial: 8250: Provide flag for IER toggling for RS485
  • From: John Ogness
• Re: (subset) [PATCH v5 00/10] riscv: add initial support for SpacemiT K1
  • From: Yixun Lan
• Re: [PATCH tty-next v4 5/6] serial: 8250: Switch to nbcon console
  • From: Petr Mladek
• Re: [PATCH tty-next v4 4/6] serial: 8250: Provide flag for IER toggling for RS485
  • From: Petr Mladek
• Re: [PATCH RFT 0/6] serial: sh-sci: Fixes for earlycon and keep_bootcon
  • From: Claudiu Beznea
• Re: [PATCH tty-next v4 2/6] serial: 8250: Use frame rate to determine timeout
  • From: Petr Mladek
• Re: [PATCH tty-next v4 1/6] serial: 8250: Adjust the timeout for FIFO mode
  • From: Petr Mladek
• Re: [PATCH] tty: serial: fsl_lpuart: increase maximum uart_nr to 12
  • From: Greg KH
• [PATCH] tty: serial: fsl_lpuart: increase maximum uart_nr to 12
  • From: Sherry Sun
• Re: [PATCH v4 01/11] libnvdimm: Replace namespace_match() with device_find_child_by_name()
  • From: Zijun Hu
• Re: [PATCH v4 01/11] libnvdimm: Replace namespace_match() with device_find_child_by_name()
  • From: Fan Ni
• Re: [PATCH RFT 6/6] serial: sh-sci: Increment the runtime usage counter for the earlycon device
  • From: Claudiu Beznea
• Re: [PATCH v4 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Mathieu Poirier
• Re: [PATCH v4 00/13] Add support for SAMA7D65
  • From: Claudiu Beznea
• Re: [PATCH v4 09/13] ARM: dts: microchip: add sama7d65 SoC DT
  • From: Claudiu Beznea
• Re: [PATCH v4 08/13] clk: at91: sama7d65: add sama7d65 pmc driver
  • From: Claudiu Beznea
• Re: [syzbot] [serial?] possible deadlock in tty_buffer_flush (3)
  • From: syzbot
• Re: [PATCH tty-next v4 0/6] convert 8250 to nbcon
  • From: John Ogness
• Re: [PATCH tty-next v4 0/6] convert 8250 to nbcon
  • From: John Ogness
• Re: [PATCH tty-next v4 5/6] serial: 8250: Switch to nbcon console
  • From: John Ogness
• Re: [PATCH tty-next v4 0/6] convert 8250 to nbcon
  • From: Andy Shevchenko
• Re: [PATCH tty-next v4 5/6] serial: 8250: Switch to nbcon console
  • From: Andy Shevchenko
• Re: [PATCH tty-next v4 2/6] serial: 8250: Use frame rate to determine timeout
  • From: Andy Shevchenko
• [PATCH 2/2] tty: n_gsm: Fix control dlci ADM mode processing
  • From: Ivaylo Dimitrov
• [PATCH 1/2] tty: n_gsm: wait until channel 0 is ready
  • From: Ivaylo Dimitrov
• [PATCH 0/2] tty: n_gsm fixes
  • From: Ivaylo Dimitrov
• Re: [PATCH 1/2] ttynull: Add an option to allow ttynull to be used as a console device
  • From: nerdopolis
• [PATCH tty-next v4 5/6] serial: 8250: Switch to nbcon console
  • From: John Ogness
• [PATCH tty-next v4 4/6] serial: 8250: Provide flag for IER toggling for RS485
  • From: John Ogness
• [PATCH tty-next v4 6/6] serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()"
  • From: John Ogness
• [PATCH tty-next v4 3/6] serial: 8250: Use high-level writing function for FIFO
  • From: John Ogness
• [PATCH tty-next v4 1/6] serial: 8250: Adjust the timeout for FIFO mode
  • From: John Ogness
• [PATCH tty-next v4 2/6] serial: 8250: Use frame rate to determine timeout
  • From: John Ogness
• [PATCH tty-next v4 0/6] convert 8250 to nbcon
  • From: John Ogness
• Re: [syzbot] [serial?] KMSAN: uninit-value in n_tty_receive_buf_closing (3)
  • From: syzbot
• Re: [PATCH v2 00/17] rockchip: Add rk3562 support
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 09/17] dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 00/17] rockchip: Add rk3562 support
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: mips_ejtag_fdc: Call cpu_relax() in registers polling busy loops
  • From: Zhongqiu Han
• Re: [PATCH v5 11/12] cxl/pmem: Remove is_cxl_nvdimm_bridge()
  • From: Jonathan Cameron
• Re: [PATCH v5 10/12] cxl/pmem: Replace match_nvdimm_bridge() with API device_match_type()
  • From: Jonathan Cameron
• Re: [PATCH v5 04/12] driver core: Constify API device_find_child() and adapt for various usages
  • From: Jonathan Cameron
• Re: [PATCH tty-next v1 1/4] serial: 8250: Use @ier bits to determine if Rx is stopped
  • From: Andy Shevchenko
• [tty:tty-linus] BUILD SUCCESS 0cfc36ea51684b5932cd3951ded523777d807af2
  • From: kernel test robot
• [PATCH v5 11/12] cxl/pmem: Remove is_cxl_nvdimm_bridge()
  • From: Zijun Hu
• [PATCH v5 12/12] usb: typec: class: Remove both cable_match() and partner_match()
  • From: Zijun Hu
• [PATCH v5 10/12] cxl/pmem: Replace match_nvdimm_bridge() with API device_match_type()
  • From: Zijun Hu
• [PATCH v5 09/12] driver core: Introduce an device matching API device_match_type()
  • From: Zijun Hu
• [PATCH v5 08/12] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: Zijun Hu
• [PATCH v5 07/12] slimbus: core: Remove of_slim_match_dev()
  • From: Zijun Hu
• [PATCH v5 06/12] driver core: Remove match_any()
  • From: Zijun Hu
• [PATCH v5 05/12] driver core: Simplify API device_find_child_by_name() implementation
  • From: Zijun Hu
• [PATCH v5 04/12] driver core: Constify API device_find_child() and adapt for various usages
  • From: Zijun Hu
• [PATCH v5 03/12] bus: fsl-mc: Constify fsl_mc_device_match()
  • From: Zijun Hu
• [PATCH v5 02/12] slimbus: core: Constify slim_eaddr_equal()
  • From: Zijun Hu
• [PATCH v5 01/12] libnvdimm: Replace namespace_match() with device_find_child_by_name()
  • From: Zijun Hu
• [PATCH v5 00/12] driver core: Constify API device_find_child()
  • From: Zijun Hu
• Re: [PATCH v4 10/11] cxl/pmem: Replace match_nvdimm_bridge() with API device_match_type()
  • From: Zijun Hu
• Re: [PATCH v4 05/11] driver core: Simplify API device_find_child_by_name() implementation
  • From: Zijun Hu
• Re: [PATCH v4 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Zijun Hu
• Re: [PATCH v4 03/11] bus: fsl-mc: Constify fsl_mc_device_match()
  • From: Zijun Hu
• [tty:tty-testing] BUILD SUCCESS 2c1fd53af21b8cb13878b054894d33d3383eb1f3
  • From: kernel test robot
• [PATCH v2 09/17] dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
  • From: Kever Yang
• [PATCH v2 00/17] rockchip: Add rk3562 support
  • From: Kever Yang
• Re: [PATCH v4 11/11] usb: typec: class: Remove both cable_match() and partner_match()
  • From: Jonathan Cameron
• Re: [PATCH v4 10/11] cxl/pmem: Replace match_nvdimm_bridge() with API device_match_type()
  • From: Jonathan Cameron
• Re: [PATCH v4 09/11] driver core: Introduce an device matching API device_match_type()
  • From: Jonathan Cameron
• Re: [PATCH v4 08/11] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: Jonathan Cameron
• Re: [PATCH v4 07/11] slimbus: core: Remove of_slim_match_dev()
  • From: Jonathan Cameron
• Re: [PATCH v4 06/11] driver core: Remove match_any()
  • From: Jonathan Cameron
• Re: [PATCH v4 05/11] driver core: Simplify API device_find_child_by_name() implementation
  • From: Jonathan Cameron
• [no subject]
  • From: Unknown
• Re: [PATCH v4 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Jonathan Cameron
• Re: [PATCH v4 03/11] bus: fsl-mc: Constify fsl_mc_device_match()
  • From: Jonathan Cameron
• Re: [PATCH v4 02/11] slimbus: core: Constify slim_eaddr_equal()
  • From: Jonathan Cameron
• Re: [PATCH v4 01/11] libnvdimm: Replace namespace_match() with device_find_child_by_name()
  • From: Jonathan Cameron
• Re: [External Email] Re: [PATCH] serial: sc16is7xx: Add polling feature if no IRQ usage possible
  • From: Greg KH
• Re: [PATCH 1/1] tty: respond to TIOCGWINSZ when hung
  • From: Greg Kroah-Hartman
• RE: [External Email] Re: [PATCH] serial: sc16is7xx: Add polling feature if no IRQ usage possible
  • From: Maarten Brock
• Re: [PATCH v4 00/13] Add support for SAMA7D65
  • From: Rob Herring (Arm)
• Re: [PATCH v4 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Uwe Kleine-König
• [PATCH v3] serial: amba-pl011: Fix RTS handling in RS485 mode
  • From: Miroslav Ondra via B4 Relay
• Re: [PATCH RFT 0/6] serial: sh-sci: Fixes for earlycon and keep_bootcon
  • From: Claudiu Beznea
• Re: [PATCH RFT 6/6] serial: sh-sci: Increment the runtime usage counter for the earlycon device
  • From: Claudiu Beznea
• Re: [PATCH RFT 5/6] serial: sh-sci: Clean sci_ports[0] after at earlycon exit
  • From: Claudiu Beznea
• Re: [PATCH RFT 3/6] serial: sh-sci: Move runtime PM enable to sci_probe_single()
  • From: Claudiu Beznea
• Re: [PATCH RFT 1/6] serial: sh-sci: Check if TX data was written to device in .tx_empty()
  • From: Claudiu Beznea
• [PATCH v4 06/13] dt-bindings: clocks: atmel,at91sam9x5-sckc: add sama7d65
  • From: Ryan.Wanner
• [PATCH v4 13/13] ARM: at91: add new SoC sama7d65
  • From: Ryan.Wanner
• [PATCH v4 12/13] ARM: configs: at91: sama7: add new SoC config
  • From: Ryan.Wanner
• [PATCH v4 11/13] ARM: dts: microchip: add support for sama7d65_curiosity board
  • From: Ryan.Wanner
• [PATCH v4 10/13] ARM: dts: at91: Add sama7d65 pinmux
  • From: Ryan.Wanner
• [PATCH v4 08/13] clk: at91: sama7d65: add sama7d65 pmc driver
  • From: Ryan.Wanner
• [PATCH v4 07/13] dt-bindings: clock: Add SAMA7D65 PMC compatible string
  • From: Ryan.Wanner
• [PATCH v4 09/13] ARM: dts: microchip: add sama7d65 SoC DT
  • From: Ryan.Wanner
• [PATCH v4 05/13] dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
  • From: Ryan.Wanner
• [PATCH v4 04/13] dt-bindings: serial: atmel,at91-usart: add microchip,sama7d65-usart
  • From: Ryan.Wanner
• [PATCH v4 03/13] dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT
  • From: Ryan.Wanner
• [PATCH v4 02/13] dt-bindings: mfd: atmel,sama5d2-flexcom: add microchip,sama7d65-flexcom
  • From: Ryan.Wanner
• [PATCH v4 01/13] dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity
  • From: Ryan.Wanner
• [PATCH v4 00/13] Add support for SAMA7D65
  • From: Ryan.Wanner
• Re: [PATCH] tty: mips_ejtag_fdc: Call cpu_relax() in registers polling busy loops
  • From: Greg KH
• Re: [PATCH] tty: mips_ejtag_fdc: Call cpu_relax() in registers polling busy loops
  • From: Zhongqiu Han
• Re: [PATCH] tty: mips_ejtag_fdc: Call cpu_relax() in registers polling busy loops
  • From: Zhongqiu Han
• Re: [PATCH 00/38] rockchip: Add rk3562 support
  • From: Greg Kroah-Hartman
• Re: [PATCH tty-next v1 1/4] serial: 8250: Use @ier bits to determine if Rx is stopped
  • From: John Ogness
• [PATCH 00/38] rockchip: Add rk3562 support
  • From: Kever Yang
• Re: [PATCH] tty: mips_ejtag_fdc: Call cpu_relax() in registers polling busy loops
  • From: Jiri Slaby
• Re: [External Email] Re: [PATCH] serial: sc16is7xx: Add polling feature if no IRQ usage possible
  • From: Andre Werner
• [syzbot] [serial?] [input?] [usb?] WARNING in sched_show_task
  • From: syzbot
• Re: [PATCH RFT 0/6] serial: sh-sci: Fixes for earlycon and keep_bootcon
  • From: Geert Uytterhoeven
• Re: [PATCH RFT 6/6] serial: sh-sci: Increment the runtime usage counter for the earlycon device
  • From: Geert Uytterhoeven
• Re: [PATCH RFT 5/6] serial: sh-sci: Clean sci_ports[0] after at earlycon exit
  • From: Geert Uytterhoeven
• Re: [PATCH RFT 4/6] serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use
  • From: Geert Uytterhoeven
• Re: [PATCH] tty: mips_ejtag_fdc: Call cpu_relax() in registers polling busy loops
  • From: Greg KH
• [PATCH] tty: mips_ejtag_fdc: Call cpu_relax() in registers polling busy loops
  • From: Zhongqiu Han
• Re: [PATCH RFT 3/6] serial: sh-sci: Move runtime PM enable to sci_probe_single()
  • From: Geert Uytterhoeven
• Re: [PATCH RFT 2/6] serial: sh-sci: Drop __initdata macro for port_cfg
  • From: Geert Uytterhoeven
• Re: [PATCH RFT 1/6] serial: sh-sci: Check if TX data was written to device in .tx_empty()
  • From: Geert Uytterhoeven
• Re: [External Email] Re: [PATCH] serial: sc16is7xx: Add polling feature if no IRQ usage possible
  • From: Greg KH
• Re: [External Email] Re: [PATCH] serial: sc16is7xx: Add polling feature if no IRQ usage possible
  • From: Andre Werner
• [PATCH] serial: sc16is7xx: Add polling feature if no IRQ usage possible
  • From: Andre Werner
• Re: [PATCH] serial: sc16is7xx: Add polling feature if no IRQ usage possible
  • From: Greg KH
• Re: [PATCH 1/6] tty: n_gsm: Add support for serdev drivers
  • From: Ivaylo Dimitrov
• Re: [PATCH 1/6] tty: n_gsm: Add support for serdev drivers
  • From: Jiri Slaby
• Re: [PATCH 1/6] tty: n_gsm: Add support for serdev drivers
  • From: Ivaylo Dimitrov
• Re: [PATCH v5 00/10] riscv: add initial support for SpacemiT K1
  • From: Yixun Lan
• Re: [PATCH 1/4] serial: sc16is7xx: add missing support for rs485 devicetree properties
  • From: Hugo Villeneuve
• Re: Re: [PATCH v2 2/3] sysctl: Fix underflow value setting risk in vm_table
  • From: Joel Granados
• Re: Re: [PATCH v2 2/3] sysctl: Fix underflow value setting risk in vm_table
  • From: Joel Granados
• [PATCH v1 tty-next] 8250: microchip: pci1xxxx: Add workaround for RTS bit toggle
  • From: Rengarajan S
• Re: [PATCH v3] Documentation: move dev-tools debugging files to process/debugging/
  • From: Jonathan Corbet
• Re: [PATCH v2 2/3] sysctl: Fix underflow value setting risk in vm_table
  • From: Nicolas Bouchinet
• [syzbot] Monthly serial report (Dec 2024)
  • From: syzbot
• [tty:tty-testing] BUILD SUCCESS 30691a59c85c48575b04e849f675660fd8060cad
  • From: kernel test robot
• Re: [PATCH 1/4] serial: sc16is7xx: add missing support for rs485 devicetree properties
  • From: Greg Kroah-Hartman
• Re: [PATCH tty-next v1 1/4] serial: 8250: Use @ier bits to determine if Rx is stopped
  • From: Andy Shevchenko
• Re: [PATCH tty-next v1 2/4] serial: 8250: Do not set UART_LSR_THRE in @read_status_mask
  • From: Andy Shevchenko
• Re: [PATCH tty-next v1 1/4] serial: 8250: Use @ier bits to determine if Rx is stopped
  • From: Andy Shevchenko
• [PATCH 4/4] serial: sc16is7xx: fix invalid FIFO access with special register set
  • From: Hugo Villeneuve
• [PATCH 1/4] serial: sc16is7xx: add missing support for rs485 devicetree properties
  • From: Hugo Villeneuve
• [PATCH 3/4] serial: sc16is7xx: fix TX fifo corruption
  • From: Hugo Villeneuve
• [PATCH 2/4] serial: sc16is7xx: refactor FIFO access functions to increase commonality
  • From: Hugo Villeneuve
• [PATCH tty-next v1 4/4] serial: 8250: Explain the role of @read_status_mask
  • From: John Ogness
• [PATCH tty-next v1 3/4] serial: 8250: Never adjust UART_LSR_DR in @read_status_mask
  • From: John Ogness
• [PATCH tty-next v1 2/4] serial: 8250: Do not set UART_LSR_THRE in @read_status_mask
  • From: John Ogness
• [PATCH tty-next v1 1/4] serial: 8250: Use @ier bits to determine if Rx is stopped
  • From: John Ogness
• [PATCH tty-next v1 0/4] serial: 8250: Fix LSR masking
  • From: John Ogness
• Re: [PATCH] serial: stm32: use port lock wrappers for break control
  • From: John Ogness
• Re: [PATCH] serial: stm32: use port lock wrappers for break control
  • From: Greg Kroah-Hartman
• [PATCH] serial: stm32: use port lock wrappers for break control
  • From: Ben Wolsieffer
• Re: [PATCH] tty: mark ctl_table as const
  • From: Luis Felipe Hernandez
• [PATCH] tty: mark ctl_table as const
  • From: Luis Felipe Hernandez
• [tty:tty-testing] BUILD SUCCESS aea2654cce40a6e34e91f3be2a31cd040fdea822
  • From: kernel test robot
• Re: [PATCH v5 00/10] riscv: add initial support for SpacemiT K1
  • From: Conor Dooley
• Re: [GIT PULL] Serial driver fixes for 6.13-rc3
  • From: pr-tracker-bot
• [GIT PULL] Serial driver fixes for 6.13-rc3
  • From: Greg KH
• [PATCH] tty: Make sysctl table const
  • From: Ricardo B. Marliere
• Re: [PATCH v2 3/3] kgdb: Add command linux.vmcoreinfo to kgdb
  • From: Doug Anderson
• Re: [PATCH v2 2/3] serial: Move LF -> CRLF replacement from serial console to kdb
  • From: Doug Anderson
• Re: [PATCH v2 1/3] kgdb: Add kgdb_mem2ebin function for converting memory to binary format
  • From: Doug Anderson
• Re: [PATCH v1 0/7] Add support to load QUP SE firmware from
  • From: Konrad Dybcio
• Re: [PATCH v1 0/7] Add support to load QUP SE firmware from
  • From: Konrad Dybcio
• Re: [PATCH v2 01/13] dt-bindings: serial: renesas: Document RZ/G3E (r9a09g047) scif
  • From: Geert Uytterhoeven
• Re: [PATCH v5 00/10] riscv: add initial support for SpacemiT K1
  • From: Yixun Lan
• Re: [PATCH v3 07/13] dt-bindings: clock: Add SAMA7D65 PMC compatible string
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 07/13] dt-bindings: clock: Add SAMA7D65 PMC compatible string
  • From: Krzysztof Kozlowski
• Re: [PATCH v2] serial: amba-pl011: Fix RTS handling in RS485 mode
  • From: Lino Sanfilippo
• Re: [PATCH v5 00/10] riscv: add initial support for SpacemiT K1
  • From: patchwork-bot+linux-riscv
• Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT properties for QUP firmware loading
  • From: Doug Anderson
• Re: [PATCH v3 05/13] dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
  • From: Rob Herring (Arm)
• Re: [PATCH v3 04/13] dt-bindings: serial: atmel,at91-usart: add microchip,sama7d65-usart
  • From: Rob Herring (Arm)
• Re: [PATCH v3 03/13] dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT
  • From: Rob Herring (Arm)
• Re: [PATCH 2/3] serial: Move LF -> CRLF replacement from serial console to kdb
  • From: Amal
• [PATCH v2 2/3] serial: Move LF -> CRLF replacement from serial console to kdb
  • From: Amal Raj T
• [PATCH v2 0/3] Add a new command in kgdb for vmcoreinfo
  • From: Amal Raj T
• [PATCH v2 3/3] kgdb: Add command linux.vmcoreinfo to kgdb
  • From: Amal Raj T
• [PATCH v2 1/3] kgdb: Add kgdb_mem2ebin function for converting memory to binary format
  • From: Amal Raj T
• Re: [PATCH v3 07/13] dt-bindings: clock: Add SAMA7D65 PMC compatible string
  • From: Ryan Wanner
• Re: [PATCH v4 08/11] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: Bartosz Golaszewski
• [PATCH 3/3] tty: serial: extract uart_change_port() from uart_set_info()
  • From: Jiri Slaby (SUSE)
• [PATCH 2/3] tty: serial: get rid of exit label from uart_set_info()
  • From: Jiri Slaby (SUSE)
• [PATCH 1/3] tty: serial_core: use more guard(mutex)
  • From: Jiri Slaby (SUSE)
• [PATCH 0/3] tty: serial_core: little cleanup
  • From: Jiri Slaby (SUSE)
• Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT properties for QUP firmware loading
  • From: Viken Dadhaniya
• [PATCH v4 08/11] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: Zijun Hu
• [PATCH v4 10/11] cxl/pmem: Replace match_nvdimm_bridge() with API device_match_type()
  • From: Zijun Hu
• [PATCH v4 11/11] usb: typec: class: Remove both cable_match() and partner_match()
  • From: Zijun Hu
• [PATCH v4 09/11] driver core: Introduce an device matching API device_match_type()
  • From: Zijun Hu
• [PATCH v4 07/11] slimbus: core: Remove of_slim_match_dev()
  • From: Zijun Hu
• [PATCH v4 06/11] driver core: Remove match_any()
  • From: Zijun Hu
• [PATCH v4 05/11] driver core: Simplify API device_find_child_by_name() implementation
  • From: Zijun Hu
• [PATCH v4 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Zijun Hu
• [PATCH v4 03/11] bus: fsl-mc: Constify fsl_mc_device_match()
  • From: Zijun Hu
• [PATCH v4 02/11] slimbus: core: Constify slim_eaddr_equal()
  • From: Zijun Hu
• [PATCH v4 01/11] libnvdimm: Replace namespace_match() with device_find_child_by_name()
  • From: Zijun Hu
• [PATCH v4 00/11] driver core: Constify API device_find_child()
  • From: Zijun Hu
• [PATCH v3] serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
  • From: Xiaolei Wang
• Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT properties for QUP firmware loading
  • From: Doug Anderson
• [PATCH v2 1/1] tty: serial: 8250: Fix another runtime PM usage counter underflow
  • From: Ilpo Järvinen
• Re: [PATCH v3 07/13] dt-bindings: clock: Add SAMA7D65 PMC compatible string
  • From: Rob Herring
• Re: [PATCH v2] serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
  • From: wang xiaolei
• Re: serial 00:06: Runtime PM usage count underflow!
  • From: Borislav Petkov
• Re: [PATCH 2/3] serial: Move LF -> CRLF replacement from serial console to kdb
  • From: Daniel Thompson
• Re: [PATCH v2 2/3] sysctl: Fix underflow value setting risk in vm_table
  • From: Nicolas Bouchinet
• [PATCH 3/3] kgdb: Add command linux.vmcoreinfo to kgdb
  • From: Amal Raj T
• [PATCH 0/3] Add a new command in kgdb for vmcoreinfo
  • From: Amal Raj T
• [PATCH 2/3] serial: Move LF -> CRLF replacement from serial console to kdb
  • From: Amal Raj T
• [PATCH 1/3] kgdb: Add kgdb_mem2ebin function for converting memory to binary format
  • From: Amal Raj T
• Re: [PATCH v2] serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
  • From: Fabio Estevam
• Re: [PATCH v2] serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
  • From: Lucas Stach
• Re: [PATCH 1/2] ttynull: Add an option to allow ttynull to be used as a console device
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT properties for QUP firmware loading
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT properties for QUP firmware loading
  • From: Viken Dadhaniya
• Re: [PATCH v1 0/7] Add support to load QUP SE firmware from
  • From: Viken Dadhaniya
• Re: [PATCH v1 0/7] Add support to load QUP SE firmware from
  • From: Viken Dadhaniya
• Re: [PATCH v1 4/7] soc: qcom: geni-se:: Add support to load QUP SE Firmware via Linux subsystem
  • From: Viken Dadhaniya
• Re: [PATCH v1 4/7] soc: qcom: geni-se:: Add support to load QUP SE Firmware via Linux subsystem
  • From: Viken Dadhaniya
• Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT properties for QUP firmware loading
  • From: Viken Dadhaniya
• Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT properties for QUP firmware loading
  • From: Viken Dadhaniya
• Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT properties for QUP firmware loading
  • From: Viken Dadhaniya
• [PATCH v2] serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
  • From: Xiaolei Wang
• Re: [PATCH 1/2] ttynull: Add an option to allow ttynull to be used as a console device
  • From: nerdopolis
• [PATCH v3] Documentation: move dev-tools debugging files to process/debugging/
  • From: Randy Dunlap
• Re: [PATCH] serial: imx: Use uart_port_lock_irqsave() instead of uart_port_lock()
  • From: wang xiaolei
• Re: [PATCH v1 0/7] Add support to load QUP SE firmware from
  • From: neil . armstrong
• Re: [PATCH] serial: imx: Use uart_port_lock_irqsave() instead of uart_port_lock()
  • From: Lucas Stach
• Re: [PATCH] m68k: coldfire: Support resources for UART
  • From: Jean-Michel Hautbois
• [PATCH] serial: imx: Use uart_port_lock_irqsave() instead of uart_port_lock()
  • From: Xiaolei Wang
• Re: [PATCH] m68k: coldfire: Support resources for UART
  • From: Greg Ungerer
• Re: [PATCH v3 8/8] arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
  • From: Claudiu Beznea
• Re: [PATCH v3 6/8] arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches
  • From: Claudiu Beznea
• [syzbot] [serial?] KASAN: slab-use-after-free Read in uart_write_room
  • From: syzbot
• Re: [PATCH v3 8/8] arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
  • From: Geert Uytterhoeven
• Re: [PATCH v3 7/8] arm64: dts: renesas: rzg3s-smarc: Enable SCIF3
  • From: Geert Uytterhoeven
• Re: [PATCH v3 6/8] arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] ttynull: Add an option to allow ttynull to be used as a console device
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 11/13] ARM: dts: microchip: add support for sama7d65_curiosity board
  • From: kernel test robot
• Re: [PATCH 1/2] ttynull: Add an option to allow ttynull to be used as a console device
  • From: n3rdopolis
• Re: [PATCH v3 08/13] clk: at91: sama7d65: add sama7d65 pmc driver
  • From: Claudiu Beznea
• Re: [PATCH v3 08/13] clk: at91: sama7d65: add sama7d65 pmc driver
  • From: Christophe JAILLET
• Re: [PATCH v3 13/13] ARM: at91: add new SoC sama7d65
  • From: Claudiu Beznea
• Re: [PATCH v3 12/13] ARM: configs: at91: sama7: add new SoC config
  • From: Claudiu Beznea
• Re: [PATCH v3 11/13] ARM: dts: microchip: add support for sama7d65_curiosity board
  • From: Claudiu Beznea