Data transfer mode is fixed by TrustZone (TZ), which currently restricts developers from modifying the transfer mode from the APPS side. Document the 'qcom,gsi-dma-allowed' property to select the data transfer mode to GPI DMA (Generic Packet Interface). If not set, FIFO mode (PIO/CPU DMA) will be selected by default. Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx> --- v2 -> v3: - Drop the 'qcom,xfer-mode' property and add the 'qcom,gsi-dma-allowed' property. - Add a reference for the QUP peripheral shared YAML. - Update commit log. v2 Link: https://lore.kernel.org/linux-arm-msm/20250124105309.295769-3-quic_vdadhani@xxxxxxxxxxx/ v1 -> v2: - Drop 'qcom,load-firmware' property and add 'firmware-name' property in qup common driver. - Update commit log. v1 Link: https://lore.kernel.org/linux-kernel/20241204150326.1470749-2-quic_vdadhani@xxxxxxxxxxx/ --- --- Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml index 9f66a3bb1f80..8c2675c65455 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml @@ -60,6 +60,8 @@ properties: power-domains: maxItems: 1 + qcom,gsi-dma-allowed: true + reg: maxItems: 1 @@ -75,6 +77,7 @@ required: allOf: - $ref: /schemas/i2c/i2c-controller.yaml# + - $ref: /schemas/soc/qcom/qcom,se-common-props.yaml# - if: properties: compatible: -- 2.34.1
