Document the 'firmware-name' property in the device tree bindings to support loading SE (Serial Engine) firmware from the protocol driver, allowing for more flexible firmware management. Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx> --- v2 -> v3: - Remove ref and add maxItem element. v2 Link: https://lore.kernel.org/linux-arm-msm/20250124105309.295769-2-quic_vdadhani@xxxxxxxxxxx/ --- --- Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index 7b031ef09669..54cd585f19e3 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -54,6 +54,10 @@ properties: dma-coherent: true + firmware-name: + maxItems: 1 + description: Specify the name of the QUP firmware to load. + required: - compatible - reg @@ -135,6 +139,7 @@ examples: #address-cells = <2>; #size-cells = <2>; ranges; + firmware-name = "qcom/sa8775p/qupv3fw.elf"; i2c0: i2c@a94000 { compatible = "qcom,geni-i2c"; -- 2.34.1
