When flushing transmit side DMA, it is the transmit channel that should
be terminated, not the receive channel.
Fixes: 9e512eaaf8f40 ("serial: 8250: Fix fifo underflow on flush")
Reported-by: Wentao Guan <guanwentao@xxxxxxxxxxxxx>
Signed-off-by: John Keeping <jkeeping@xxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index f245a84f4a508..bdd26c9f34bdf 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -162,7 +162,7 @@ void serial8250_tx_dma_flush(struct uart_8250_port *p)
*/
dma->tx_size = 0;
- dmaengine_terminate_async(dma->rxchan);
+ dmaengine_terminate_async(dma->txchan);
}
int serial8250_rx_dma(struct uart_8250_port *p)
--
2.48.1
