So that they can be referenced in structs once converted to enums (in the next patches). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@xxxxxxxxxx> --- include/linux/tty_driver.h | 156 ++++++++++++++++++------------------- 1 file changed, 78 insertions(+), 78 deletions(-) diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index d4cdc089f6c3..f3be6d56e9e5 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -16,6 +16,84 @@ struct tty_driver; struct serial_icounter_struct; struct serial_struct; +/** + * DOC: TTY Driver Flags + * + * TTY_DRIVER_RESET_TERMIOS + * Requests the tty layer to reset the termios setting when the last + * process has closed the device. Used for PTYs, in particular. + * + * TTY_DRIVER_REAL_RAW + * Indicates that the driver will guarantee not to set any special + * character handling flags if this is set for the tty: + * + * ``(IGNBRK || (!BRKINT && !PARMRK)) && (IGNPAR || !INPCK)`` + * + * That is, if there is no reason for the driver to + * send notifications of parity and break characters up to the line + * driver, it won't do so. This allows the line driver to optimize for + * this case if this flag is set. (Note that there is also a promise, if + * the above case is true, not to signal overruns, either.) + * + * TTY_DRIVER_DYNAMIC_DEV + * The individual tty devices need to be registered with a call to + * tty_register_device() when the device is found in the system and + * unregistered with a call to tty_unregister_device() so the devices will + * be show up properly in sysfs. If not set, all &tty_driver.num entries + * will be created by the tty core in sysfs when tty_register_driver() is + * called. This is to be used by drivers that have tty devices that can + * appear and disappear while the main tty driver is registered with the + * tty core. + * + * TTY_DRIVER_DEVPTS_MEM + * Don't use the standard arrays (&tty_driver.ttys and + * &tty_driver.termios), instead use dynamic memory keyed through the + * devpts filesystem. This is only applicable to the PTY driver. + * + * TTY_DRIVER_HARDWARE_BREAK + * Hardware handles break signals. Pass the requested timeout to the + * &tty_operations.break_ctl instead of using a simple on/off interface. + * + * TTY_DRIVER_DYNAMIC_ALLOC + * Do not allocate structures which are needed per line for this driver + * (&tty_driver.ports) as it would waste memory. The driver will take + * care. This is only applicable to the PTY driver. + * + * TTY_DRIVER_UNNUMBERED_NODE + * Do not create numbered ``/dev`` nodes. For example, create + * ``/dev/ttyprintk`` and not ``/dev/ttyprintk0``. Applicable only when a + * driver for a single tty device is being allocated. + */ +#define TTY_DRIVER_INSTALLED 0x0001 +#define TTY_DRIVER_RESET_TERMIOS 0x0002 +#define TTY_DRIVER_REAL_RAW 0x0004 +#define TTY_DRIVER_DYNAMIC_DEV 0x0008 +#define TTY_DRIVER_DEVPTS_MEM 0x0010 +#define TTY_DRIVER_HARDWARE_BREAK 0x0020 +#define TTY_DRIVER_DYNAMIC_ALLOC 0x0040 +#define TTY_DRIVER_UNNUMBERED_NODE 0x0080 + +/* tty driver types */ +#define TTY_DRIVER_TYPE_SYSTEM 0x0001 +#define TTY_DRIVER_TYPE_CONSOLE 0x0002 +#define TTY_DRIVER_TYPE_SERIAL 0x0003 +#define TTY_DRIVER_TYPE_PTY 0x0004 +#define TTY_DRIVER_TYPE_SCC 0x0005 /* scc driver */ +#define TTY_DRIVER_TYPE_SYSCONS 0x0006 + +/* system subtypes (magic, used by tty_io.c) */ +#define SYSTEM_TYPE_TTY 0x0001 +#define SYSTEM_TYPE_CONSOLE 0x0002 +#define SYSTEM_TYPE_SYSCONS 0x0003 +#define SYSTEM_TYPE_SYSPTMX 0x0004 + +/* pty subtypes (magic, used by tty_io.c) */ +#define PTY_TYPE_MASTER 0x0001 +#define PTY_TYPE_SLAVE 0x0002 + +/* serial subtype definitions */ +#define SERIAL_TYPE_NORMAL 1 + /** * struct tty_operations -- interface between driver and tty * @@ -494,84 +572,6 @@ static inline void tty_set_operations(struct tty_driver *driver, driver->ops = op; } -/** - * DOC: TTY Driver Flags - * - * TTY_DRIVER_RESET_TERMIOS - * Requests the tty layer to reset the termios setting when the last - * process has closed the device. Used for PTYs, in particular. - * - * TTY_DRIVER_REAL_RAW - * Indicates that the driver will guarantee not to set any special - * character handling flags if this is set for the tty: - * - * ``(IGNBRK || (!BRKINT && !PARMRK)) && (IGNPAR || !INPCK)`` - * - * That is, if there is no reason for the driver to - * send notifications of parity and break characters up to the line - * driver, it won't do so. This allows the line driver to optimize for - * this case if this flag is set. (Note that there is also a promise, if - * the above case is true, not to signal overruns, either.) - * - * TTY_DRIVER_DYNAMIC_DEV - * The individual tty devices need to be registered with a call to - * tty_register_device() when the device is found in the system and - * unregistered with a call to tty_unregister_device() so the devices will - * be show up properly in sysfs. If not set, all &tty_driver.num entries - * will be created by the tty core in sysfs when tty_register_driver() is - * called. This is to be used by drivers that have tty devices that can - * appear and disappear while the main tty driver is registered with the - * tty core. - * - * TTY_DRIVER_DEVPTS_MEM - * Don't use the standard arrays (&tty_driver.ttys and - * &tty_driver.termios), instead use dynamic memory keyed through the - * devpts filesystem. This is only applicable to the PTY driver. - * - * TTY_DRIVER_HARDWARE_BREAK - * Hardware handles break signals. Pass the requested timeout to the - * &tty_operations.break_ctl instead of using a simple on/off interface. - * - * TTY_DRIVER_DYNAMIC_ALLOC - * Do not allocate structures which are needed per line for this driver - * (&tty_driver.ports) as it would waste memory. The driver will take - * care. This is only applicable to the PTY driver. - * - * TTY_DRIVER_UNNUMBERED_NODE - * Do not create numbered ``/dev`` nodes. For example, create - * ``/dev/ttyprintk`` and not ``/dev/ttyprintk0``. Applicable only when a - * driver for a single tty device is being allocated. - */ -#define TTY_DRIVER_INSTALLED 0x0001 -#define TTY_DRIVER_RESET_TERMIOS 0x0002 -#define TTY_DRIVER_REAL_RAW 0x0004 -#define TTY_DRIVER_DYNAMIC_DEV 0x0008 -#define TTY_DRIVER_DEVPTS_MEM 0x0010 -#define TTY_DRIVER_HARDWARE_BREAK 0x0020 -#define TTY_DRIVER_DYNAMIC_ALLOC 0x0040 -#define TTY_DRIVER_UNNUMBERED_NODE 0x0080 - -/* tty driver types */ -#define TTY_DRIVER_TYPE_SYSTEM 0x0001 -#define TTY_DRIVER_TYPE_CONSOLE 0x0002 -#define TTY_DRIVER_TYPE_SERIAL 0x0003 -#define TTY_DRIVER_TYPE_PTY 0x0004 -#define TTY_DRIVER_TYPE_SCC 0x0005 /* scc driver */ -#define TTY_DRIVER_TYPE_SYSCONS 0x0006 - -/* system subtypes (magic, used by tty_io.c) */ -#define SYSTEM_TYPE_TTY 0x0001 -#define SYSTEM_TYPE_CONSOLE 0x0002 -#define SYSTEM_TYPE_SYSCONS 0x0003 -#define SYSTEM_TYPE_SYSPTMX 0x0004 - -/* pty subtypes (magic, used by tty_io.c) */ -#define PTY_TYPE_MASTER 0x0001 -#define PTY_TYPE_SLAVE 0x0002 - -/* serial subtype definitions */ -#define SERIAL_TYPE_NORMAL 1 - int tty_register_driver(struct tty_driver *driver); void tty_unregister_driver(struct tty_driver *driver); struct device *tty_register_device(struct tty_driver *driver, unsigned index, -- 2.48.1
