RE: [PATCH] serial: ifx6x60: Add module parameters to manage the modem status through sysfs.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,Greg,
Got it, I will resend the new patch based on the tty-next branch to Alan again.  
Thanks!


-----Original Message-----
From: Greg KH [mailto:gregkh@xxxxxxxxxxxxxxxxxxx] 
Sent: Friday, November 16, 2012 8:52 AM
To: Chen, Jun D
Cc: Alan Cox; serial; Gorby, Russ; Liu, Chuansheng; Bi, Chao
Subject: Re: [PATCH] serial: ifx6x60: Add module parameters to manage the modem status through sysfs.

On Wed, Nov 07, 2012 at 06:06:14AM -0500, Jun Chen wrote:
> 
> The Medfield Platform implements a recovery procedure consisting in an 
> escalation from simple and light recovery procedures to stronger ones 
> with increased visibility and impact to end-user.After platform find 
> some problem from Modem,such as no response, platform will try do 
> modem warm reset.If several tries failed, platform will try to do 
> modem cold boot procedure.For Modem Cold Boot, AP is responsible to generate blob (binary object containing PIN code and other necessary information).
> Blob is stored in AP volatile memory. AP decides to read PIN code from 
> cache instead of prompting end-user, and sends it to modem as if end-user had entered it.
> 
> This patch add module parameters to manage the modem status through sysfs.
> Reset_modem can be read and write by user space.When read the 
> reset_modem,user space will get the mdm_reset_state which used to 
> avoid to run twice at once.When set the reset_modem to IFX_COLD_RESET_REQ,modem will do cold reset, other val value will trigger modem reset.
> 
> Hangup_reasons used to give one interface to user space to know and clear the modem reset reasons.
> Now there are four reasons:SPI timeout, modem initiative reset,modem coredump,spi tranfer error.
> 
> Cc: Bi Chao <chao.bi@xxxxxxxxx>
> Cc: Liu chuansheng <chuansheng.liu@xxxxxxxxx>
> Signed-off-by: Chen Jun <jun.d.chen@xxxxxxxxx>
> Acked-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
> ---
>  drivers/tty/serial/Kconfig   |    2 +-
>  drivers/tty/serial/ifx6x60.c |  194 +++++++++++++++++++++++++++++++++++++++++-
>  drivers/tty/serial/ifx6x60.h |    8 ++
>  3 files changed, 202 insertions(+), 2 deletions(-)

This patch fails to apply, can you please refresh it against my tty-next branch and resend it, keeping Alan's ack on it, so I remember it's there?

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux