[PATCH 3/6] tty: atmel_serial: switch pm ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



so we can detect when we enter in slow_clock mode and drop
at91_suspend_entering_slow_clock

Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
Cc: linux-pm@xxxxxxxxxxxxxxx
Cc: linux-serial@xxxxxxxxxxxxxxx
---
 drivers/tty/serial/atmel_serial.c |   52 +++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 25 deletions(-)

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 3d7e1ee..7a51a0c 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1720,20 +1720,10 @@ static struct uart_driver atmel_uart = {
 };
 
 #ifdef CONFIG_PM
-static bool atmel_serial_clk_will_stop(void)
+static int atmel_serial_suspend(struct device *dev, int slow_clock)
 {
-#ifdef CONFIG_ARCH_AT91
-	return at91_suspend_entering_slow_clock();
-#else
-	return false;
-#endif
-}
-
-static int atmel_serial_suspend(struct platform_device *pdev,
-				pm_message_t state)
-{
-	struct uart_port *port = platform_get_drvdata(pdev);
-	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	struct atmel_uart_port *atmel_port = dev_get_drvdata(dev);
+	struct uart_port *port = &atmel_port->uart;
 
 	if (atmel_is_console_port(port) && console_suspend_enabled) {
 		/* Drain the TX shifter */
@@ -1742,30 +1732,43 @@ static int atmel_serial_suspend(struct platform_device *pdev,
 	}
 
 	/* we can not wake up if we're running on slow clock */
-	atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
-	if (atmel_serial_clk_will_stop())
-		device_set_wakeup_enable(&pdev->dev, 0);
+	atmel_port->may_wakeup = device_may_wakeup(dev);
+	if (slow_clock)
+		device_set_wakeup_enable(dev, 0);
 
 	uart_suspend_port(&atmel_uart, port);
 
 	return 0;
 }
 
-static int atmel_serial_resume(struct platform_device *pdev)
+static int atmel_serial_suspend_standby(struct device *dev)
 {
-	struct uart_port *port = platform_get_drvdata(pdev);
-	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	return atmel_serial_suspend(dev, 0);
+}
+
+static int atmel_serial_suspend_mem(struct device *dev)
+{
+	return atmel_serial_suspend(dev, 1);
+}
+
+static int atmel_serial_resume(struct device *dev)
+{
+	struct atmel_uart_port *atmel_port = dev_get_drvdata(dev);
+	struct uart_port *port = &atmel_port->uart;
 
 	uart_resume_port(&atmel_uart, port);
-	device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
+	device_set_wakeup_enable(dev, atmel_port->may_wakeup);
 
 	return 0;
 }
-#else
-#define atmel_serial_suspend NULL
-#define atmel_serial_resume NULL
 #endif
 
+static struct dev_pm_ops atmel_serial_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(atmel_serial_suspend_standby, atmel_serial_resume)
+	SET_SYSTEM_SLEEP_STANDBY_MEM_PM_OPS(atmel_serial_suspend_standby,
+				atmel_serial_suspend_mem)
+};
+
 static int __devinit atmel_serial_probe(struct platform_device *pdev)
 {
 	struct atmel_uart_port *port;
@@ -1877,11 +1880,10 @@ static int __devexit atmel_serial_remove(struct platform_device *pdev)
 static struct platform_driver atmel_serial_driver = {
 	.probe		= atmel_serial_probe,
 	.remove		= __devexit_p(atmel_serial_remove),
-	.suspend	= atmel_serial_suspend,
-	.resume		= atmel_serial_resume,
 	.driver		= {
 		.name	= "atmel_usart",
 		.owner	= THIS_MODULE,
+		.pm	= &atmel_serial_pm_ops,
 		.of_match_table	= of_match_ptr(atmel_serial_dt_ids),
 	},
 };
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux