Re: [RFC 00/24] OMAP serial driver flow control fixes, and preparation for DMA engine conversion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sourav,

Sourav <sourav.poddar@xxxxxx> writes:

[...]

> Boot Tested this patch series against v3.6 tag(applied cleanly) on
> panda board and
> PM tested(hitting off in Idle and suspend) on omap3630 based beagle board.
>
> Note, I also tested the patches against the current master but only
> after rebasing, since the current master includes serial patches from
> Felipe Balbi[1].
> [1] https://lkml.org/lkml/2012/8/24/139
>
> Tested-by: Sourav Poddar <sourav.poddar@xxxxxx>

Did you test flow control after off-mode transitons?

Russell indicated that the context save/restore is not saving important
bits related to HW flow control, so I suspect some more testing,
specifically of flow control after off-mode is needed.

Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux