Hi Kevin,
On Wednesday 10 October 2012 11:59 PM, Kevin Hilman wrote:
Hi Sourav,
Sourav <sourav.poddar@xxxxxx> writes:
[...]
Boot Tested this patch series against v3.6 tag(applied cleanly) on
panda board and
PM tested(hitting off in Idle and suspend) on omap3630 based beagle board.
Note, I also tested the patches against the current master but only
after rebasing, since the current master includes serial patches from
Felipe Balbi[1].
[1] https://lkml.org/lkml/2012/8/24/139
Tested-by: Sourav Poddar <sourav.poddar@xxxxxx>
Did you test flow control after off-mode transitons?
Russell indicated that the context save/restore is not saving important
bits related to HW flow control, so I suspect some more testing,
specifically of flow control after off-mode is needed.
Kevin
The testing done was without any flow control enabled.
I will try to figure out how to do a hardware flow control testing
and see the status after the off mode.
~Sourav
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
