Shubhrajyoti D <shubhrajyoti@xxxxxx> writes:
> Overrun also causes an internal flag to be set, which disables further
> reception. Before the next frame can
> be received, the MPU must:
> • Reset the RX FIFO.
> • clear the internal flag.
>
> In the uart mode a dummy read is needed. Add the same.
>
> Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx>
> ---
> - functional testing on omap4sdp
> - Verified idle and suspend path hits off on beagle.
Tested-by: Kevin Hilman <khilman@xxxxxx>
This fixes the console hang I was seeing on 3530/Overo.
Thanks,
Kevin
> drivers/tty/serial/omap-serial.c | 7 +++++++
> 1 files changed, 7 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
> index a0d4460..bc22a2b 100644
> --- a/drivers/tty/serial/omap-serial.c
> +++ b/drivers/tty/serial/omap-serial.c
> @@ -334,6 +334,13 @@ static unsigned int check_modem_status(struct uart_omap_port *up)
> static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
> {
> unsigned int flag;
> + unsigned char ch = 0;
> +
> + if (!(lsr & UART_LSR_BRK_ERROR_BITS))
> + return;
> +
> + if (likely(lsr & UART_LSR_DR))
> + ch = serial_in(up, UART_RX);
>
> up->port.icount.rx++;
> flag = TTY_NORMAL;
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
