On Wed, Nov 14, 2012 at 08:49:54PM +0000, Grant Likely wrote:
> On Fri, Nov 2, 2012 at 9:48 AM, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:
> > devicetrees may have a linux,stdout-path property in the chosen
> > node describing the console device. This adds a helper function
> > to match a device against this property so a driver can call
> > add_preferred_console for a matching device.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> > ---
> > drivers/of/Kconfig | 3 +++
> > drivers/of/Makefile | 1 +
> > drivers/of/of_stdout.c | 27 +++++++++++++++++++++++++++
> > include/linux/of_stdout.h | 24 ++++++++++++++++++++++++
> > 4 files changed, 55 insertions(+)
> > create mode 100644 drivers/of/of_stdout.c
> > create mode 100644 include/linux/of_stdout.h
> >
> > diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
> > index dfba3e6..8574ebb 100644
> > --- a/drivers/of/Kconfig
> > +++ b/drivers/of/Kconfig
> > @@ -67,6 +67,9 @@ config OF_MDIO
> > help
> > OpenFirmware MDIO bus (Ethernet PHY) accessors
> >
> > +config OF_STDOUT
> > + def_bool y
> > +
> > config OF_PCI
> > def_tristate PCI
> > depends on PCI
> > diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> > index e027f44..c9f3f2f 100644
> > --- a/drivers/of/Makefile
> > +++ b/drivers/of/Makefile
> > @@ -8,6 +8,7 @@ obj-$(CONFIG_OF_I2C) += of_i2c.o
> > obj-$(CONFIG_OF_NET) += of_net.o
> > obj-$(CONFIG_OF_SELFTEST) += selftest.o
> > obj-$(CONFIG_OF_MDIO) += of_mdio.o
> > +obj-$(CONFIG_OF_STDOUT) += of_stdout.o
> > obj-$(CONFIG_OF_PCI) += of_pci.o
> > obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
> > obj-$(CONFIG_OF_MTD) += of_mtd.o
> > diff --git a/drivers/of/of_stdout.c b/drivers/of/of_stdout.c
> > new file mode 100644
> > index 0000000..c9e370e
> > --- /dev/null
> > +++ b/drivers/of/of_stdout.c
> > @@ -0,0 +1,27 @@
> > +/*
> > + * OF helper for linux,stdoutpath property.
> > + *
> > + * This file is released under the GPLv2
> > + */
> > +#include <linux/of_stdout.h>
> > +
> > +/**
> > + * of_device_is_stdout_path - check if a device node matches the
> > + * linux,stdout-path property
> > + *
> > + * Check if this device node matches the linux,stdout-path property
> > + * in the chosen node. return true if yes, false otherwise.
> > + */
> > +int of_device_is_stdout_path(struct device_node *dn)
> > +{
> > + const char *name;
> > +
> > + name = of_get_property(of_chosen, "linux,stdout-path", NULL);
> > + if (name == NULL)
> > + return 0;
> > +
> > + if (dn == of_find_node_by_path(name))
>
> need to of_node_put() the return value of of_find_node_by_path()
>
> > + return 1;
> > +
> > + return 0;
> > +}
>
> Hi Sascha,
>
> I'm fine with the helper, but there really is no need for a completely
> separate .c file. Just put it in drivers/of/base.c.
I guess the same applies to include/linux/of_stdout.h.
Should I drop the CONFIG_OF_STDOUT aswell?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
