Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- RE: [PATCH 1/6] omap iommu: tlb and pagetable primitives
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: LDP support
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/6] omap iommu: omap3 iommu device registration
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- next PM branch preview
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Beep sound in the end of audio file
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- Re: [PATCH] onenand_init: Allow disabling sync read and write based on flags, v2 (Re: [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: No OMAP PM code on the PM branch???
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 6/6] omap2 iommu: entries for Kconfig and Makefile
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH 5/6] omap iommu: entries for Kconfig and Makefile
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH 3/6] omap iommu: omap3 iommu device registration
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH 4/6] omap iommu: simple virtual address space management
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH 1/6] omap iommu: tlb and pagetable primitives
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH 2/6] omap iommu: omap2 architecture specific functions
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH 0/6] Initial support for omap iommu driver
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- Re: [PATCH] OMAP: HSMMC: Do not enable buffer ready interrupt if using DMA
- From: Jarkko Lavinen <jarkko.lavinen@xxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v3
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- OMAP3: PM: Add the wakeup source driver, v4
- From: Kim Kyuwon <q1.kim@xxxxxxxxxxx>
- Re: [PATCH] input: Add support for the TSC2003 controller.
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] onenand_init: Allow disabling sync read and write based on flags, v2 (Re: [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c)
- From: "vimal singh" <vimalsingh@xxxxxx>
- [DSPBRIDGE] Staging TODO List
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- Re: Anyone have MUSB working on PM branch?
- From: Rebecca Schultz Zavin <rschultz@xxxxxxxxxx>
- [PATCH 7/7] onenand_init: Clean-up for checkpatch.pl
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 6/7] onenand init: Convert omap3430sdp to use gpmc-onenand
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 5/7] onenand_init: Allow disabling sync read and write based on flags, v3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/7] onenand init: Pass configuration data from board-*.c files
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/7] onenand init: Rename n800_* functions to gpmc_onenand_* functions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/7] onenand init: Build gpmc-onenand.o based on CONFIG_MTD_ONENAND_OMAP2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/7] onenand init: Rename board-n800-flash.c to gpmc-onenand.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/7] Generic gpmc-onenand initialization, v3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] onenand_init: Allow disabling sync read and write based on flags, v3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] input: Add support for the TSC2003 controller.
- From: Trilok Soni <soni.trilok@xxxxxxxxx>
- Re: [PATCH] onenand_init: Allow disabling sync read and write based on flags, v2 (Re: [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] I2C: OMAP: Add missing wakeup events
- From: Jagadeesh Bhaskar Pakaravoor <jagadeeshbp@xxxxxxxxx>
- Re: [PATCH] input: Add support for the TSC2003 controller.
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] input: Add support for the TSC2003 controller.
- From: Trilok Soni <soni.trilok@xxxxxxxxx>
- Re: [PATCH] input: Add support for the TSC2003 controller.
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] onenand_init: Allow disabling sync read and write based on flags (Re: [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c)
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH] onenand_init: Allow disabling sync read and write based on flags, v2 (Re: [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c)
- From: "vimal singh" <vimalsingh@xxxxxx>
- Re: Anyone have MUSB working on PM branch?
- From: "Eugeny S. Mints" <eugeny.mints@xxxxxxxxx>
- Re: No OMAP PM code on the PM branch???
- From: "Eugeny S. Mints" <eugeny.mints@xxxxxxxxx>
- No OMAP PM code on the PM branch???
- From: Peter Barada <peterb@xxxxxxxxxxx>
- Anyone have MUSB working on PM branch?
- From: Peter Barada <peterb@xxxxxxxxxxx>
- Re: [PATCH] onenand_init: Allow disabling sync read and write based on flags, v2 (Re: [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] mmc-twl4030: use correct controller in twl_mmc23_set_power
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- Re: LDP support
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- [PATCH] onenand init: Convert omap3430sdp to use gpmc-onenand (Re: [PATCH] onenand_init: Allow disabling sync read and write based on flags (Re: [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c))
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP: HSMMC: Do not enable buffer ready interrupt if using DMA
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] onenand_init: Allow disabling sync read and write based on flags (Re: [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Overo broken with current top of tree
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Overo broken with current top of tree
- From: Steve Sakoman <sakoman@xxxxxxxxx>
- Re: Overo broken with current top of tree
- From: David Brownell <david-b@xxxxxxxxxxx>
- RE: Overo broken with current top of tree
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: Overo broken with current top of tree
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Overo broken with current top of tree
- From: Steve Sakoman <sakoman@xxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v3
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 4/4] onenand init: Pass configuration data from board-*.c files
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/3] OMAP2/3 V4L2 Display Driver
- From: InKi Dae <daeinki@xxxxxxxxx>
- TVP514x: Migration to sub-device framework
- Re: Overo broken with current top of tree
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Overo broken with current top of tree
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- Re: dss2 and dsi
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- RE: [PATCH 3/3] OMAP2/3 V4L2 Display Driver
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- RE: [PATCH] OMAP: sDMA: Correct the the omap_request_dma_chain() signature
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: Overo broken with current top of tree
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- RE: [PATCH] OMAP: sDMA: Correct the the omap_request_dma_chain() signature
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [PATCHv2] ARM: OMAP: gptimer based event monitor driver for oprofile
- From: Siarhei Siamashka <siarhei.siamashka@xxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v3
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c
- From: "vimal singh" <vimalsingh@xxxxxx>
- RE: [PATCH 3/3] OMAP2/3 V4L2 Display Driver
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- Re: [PATCH 3/3] OMAP2/3 V4L2 Display Driver
- From: InKi Dae <daeinki@xxxxxxxxx>
- Re: [PATCHv2] ARM: OMAP: gptimer based event monitor driver for oprofile
- From: "Hemanth V" <hemanthv@xxxxxx>
- Re: [PATCH 4/4] onenand init: Pass configuration data from board-*.c files
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- RE: [PATCH] OMAP: sDMA: Correct the the omap_request_dma_chain() signature
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: [PATCH] OMAP: sDMA: Correct the the omap_request_dma_chain() signature
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [PATCH] input: Add support for the TSC2003 controller.
- From: Kwangwoo Lee <kwangwoo.lee@xxxxxxxxx>
- [PATCH 5/4] onenand init: Debug patch to print out the onenand partitions from bootloader
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/4] onenand init: Pass configuration data from board-*.c files
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/4] onenand init: Rename n800_* functions to gpmc_onenand_* functions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/4] onenand init: Build gpmc-onenand.o based on CONFIG_MTD_ONENAND_OMAP2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/4] Generic gpmc-onenand initialization, v2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/4] Generic gpmc-onenand initialization
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP: sDMA: Correct the the omap_request_dma_chain() signature
- From: Jarkko Nikula <jhnikula@xxxxxxxxx>
- Re: [PATCH] OMAP OneNAND: add missing __devexit_p wrappers
- From: David Brownell <david-b@xxxxxxxxxxx>
- Fwd: dss2 and dsi
- From: Rebecca Schultz Zavin <rebecca@xxxxxxxxxxx>
- Overo broken with current top of tree
- From: Steve Sakoman <sakoman@xxxxxxxxx>
- Re: USB EHCI - Power Management - Query
- From: Greg KH <greg@xxxxxxxxx>
- RE: Issues with PM Branch
- From: "Menon, Nishanth" <nm@xxxxxx>
- Beagleboard rev C memory timings & suspend/resume
- From: Jean Pihet <jpihet@xxxxxxxxxx>
- Re: [PATCH] input: Add support for the TSC2003 controller.
- From: Trilok Soni <soni.trilok@xxxxxxxxx>
- Re: [PATCH] OMAP OneNAND: add missing __devexit_p wrappers
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH] twl4030-gpio: Avoid call to a discarded function
- From: Mika Korhonen <mika.j.korhonen@xxxxxxxxx>
- [PATCH] OMAP: sDMA: Correct the the omap_request_dma_chain() signature
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH] OMAP OneNAND: add missing __devexit_p wrappers
- From: Mika Korhonen <mika.j.korhonen@xxxxxxxxx>
- RE: [PATCH] OMAP3: SR: Fix SR driver to check for omap-pm return values
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- USB EHCI - Power Management - Query
- From: Remith Ravi <remithmailinglist@xxxxxxxxx>
- [PATCH] RX51: Remove multiple definition of MACH_NOKIA_RX51 in Kconfig
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- Re: [PATCH] OMAP3: SR: Fix SR driver to check for omap-pm return values
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- [PATCH] OMAP3: SR: Fix SR driver to check for omap-pm return values
- From: Rajendra Nayak <rnayak@xxxxxx>
- Re: Issues with PM Branch
- From: Abraham Arce <abraham.arce.moreno@xxxxxxxxx>
- Display flicker problem with TOMI's display framework
- From: halli manjunatha <hallimanju@xxxxxxxxx>
- Re: [RFC] Allow disabling wakeup for serial ports, including during off mode.
- From: Russ Dill <russ.dill@xxxxxxxxx>
- Re: Issues with PM Branch
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: LDP support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- LDP support
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again
- From: Koen Kooi <koen@xxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP: HSMMC: Do not enable buffer ready interrupt if using DMA
- From: Pierre Ossman <pierre@xxxxxxxxx>
- [APPLIED] [PATCH] OMAP: pandora: setup regulator framework for MMC
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Issues with PM Branch
- From: Abraham Arce <abraham.arce.moreno@xxxxxxxxx>
- [PATCH 3/3][RFC]OMAP4: SMP: Enable SMP support for OMAP4430
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH 2/3][RFC]OMAP4: SMP: Add mpu timer support for OMAP4430
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH 1/3][RFC]OMAP4: SMP: Add OMAP4430 SMP board files
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: Previewer and resizer demo
- From: Felix Radensky <felix@xxxxxxxxxxxxxxxx>
- [PATCH 0/3] [RFC] OMAP4: SMP: Patch series
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: [PATCH][DSPBRIDGE] Add the device after driver initialization
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- Re: OMAP35x GP TIMER as a wakeup trigger
- From: Ashwin Bihari <abihari@xxxxxxxxx>
- [PATCH][DSPBRIDGE][v2] Add the device after driver initialization
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- Re: [PATCH] regulator core: fix double-free in regulator_register() error path
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- Re: [PATCH] regulator core: fix double-free in regulator_register() error path
- From: David Brownell <david-b@xxxxxxxxxxx>
- [PATCH][DSPBRIDGE] Add the device after driver initialization
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- RE: [RFC] Allow disabling wakeup for serial ports, including during off mode.
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [PATCH] regulator core: fix double-free in regulator_register() error path
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- RE: [RFC] [Patch 0/2] Proposal for changes to TWL4030/TWL5030 framework for integrating the new TWL6030 chip
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- [RFC][PATCH 2/2] OMAP: PM: Fix boot with OMAP_SMARTREFLEX and OMAP_PM_NONE
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- [RFC][PATCH 1/2] OMAP: PM: Fix boot with OMAP_SMARTREFLEX and OMAP_PM_NOOP
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- [RFC][PATCH 0/2] OMAP: PM: Fix boot with SMARTREFLEX and PM_NOOP/PM_NONE
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- [PATCH] OMAP: PM: Fix boot with OMAP_SMARTREFLEX and OMAP_PM_NONE
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- [PATCH] OMAP: PM: Fix boot with OMAP_SMARTREFLEX and OMAP_PM_NOOP
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- [RFC][PATCH 0/2] OMAP: PM: Fix boot with SMARTREFLEX and PM_NOOP/PM_NONE
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- Re: [PATCH] regulator core: fix double-free in regulator_register() error path
- From: David Brownell <david-b@xxxxxxxxxxx>
- RE: [RFC] [Patch 0/2] Proposal for changes to TWL4030/TWL5030 framework for integrating the new TWL6030 chip
- From: "Pakaravoor, Jagadeesh" <j-pakaravoor@xxxxxx>
- Re: [RFC] [Patch 0/2] Proposal for changes to TWL4030/TWL5030 framework for integrating the new TWL6030 chip
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- Question about OABI_COMPAT feature in do_signal() function
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: [PATCH] regulator core: fix double-free in regulator_register() error path
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [RFC] [Patch 2/2] Proposal for changes to TWL4030/TWL5030 framework for integrating the new TWL6030 chip
- From: "Pakaravoor, Jagadeesh" <j-pakaravoor@xxxxxx>
- [RFC] [Patch 0/2] Proposal for changes to TWL4030/TWL5030 framework for integrating the new TWL6030 chip
- From: "Pakaravoor, Jagadeesh" <j-pakaravoor@xxxxxx>
- Re: [PATCH] regulator core: fix double-free in regulator_register() error path
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] OMAP: pandora: setup regulator framework for MMC
- From: David Brownell <david-b@xxxxxxxxxxx>
- [APPLIED] [PATCH] OMAP2 H4: fix build by removing IRDA support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: OMAP35x GP TIMER as a wakeup trigger
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: No 2.6.29 omap tag?
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [RFC] Allow disabling wakeup for serial ports, including during off mode.
- From: Russ Dill <russ.dill@xxxxxxxxx>
- [PATCH] Allow OMAP3 GPIO wakeup from power off.
- From: Russ Dill <russ.dill@xxxxxxxxx>
- RE: OMAP35x GP TIMER as a wakeup trigger
- From: "Dasgupta, Romit" <romit@xxxxxx>
- Re: OMAP35x GP TIMER as a wakeup trigger
- From: Ashwin Bihari <abihari@xxxxxxxxx>
- [PATCH 2/2] OMAP3: PM: Early exit on invalid parameters
- From: Phil Carmody <ext-phil.2.carmody@xxxxxxxxx>
- [PATCH 0/2] OMAP3: PM: More pedantic parameter and error checking in smartreflex
- From: Phil Carmody <ext-phil.2.carmody@xxxxxxxxx>
- [PATCH 1/2] OMAP3: PM: Don't do unnecessary searches in omap_sr_vdd*_autocomp_store
- From: Phil Carmody <ext-phil.2.carmody@xxxxxxxxx>
- RE: OMAP35x GP TIMER as a wakeup trigger
- From: "Premi, Sanjeev" <premi@xxxxxx>
- OMAP35x GP TIMER as a wakeup trigger
- From: Ashwin Bihari <abihari@xxxxxxxxx>
- [PATCH] OMAP3: PM: Ensure PRCM interrupts are cleared at boot
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP: PM: make mach/pm.h OMAP1-specific
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- RE: RFC for supporting multiple PMICs
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- Re: [PATCH 0/2] I2C: OMAP: spurious IRQ fixes
- From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
- Re: [PATCH] regulator core: fix double-free in regulator_register() error path
- From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
- How to add kernel level battery support for the Overo TI OMAP 3503 platform
- From: Elvis Dowson <elvis.dowson@xxxxxxx>
- Re: Card detect IRQ errors
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [rft/rfc/patch-v2.6.29-rc5+ 00/23] ehci cleanup series
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [rft/rfc/patch-v2.6.29-rc5+ 00/23] ehci cleanup series
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- RE: Card detect IRQ errors
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Card detect IRQ errors
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- Re: [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: Jean Pihet <jpihet@xxxxxxxxxx>
- Re: [RFC] dspbridge: staging todo list
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- RE: [RFC] dspbridge: staging todo list
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: tidspbridge git repository
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH] OMAP: pandora: setup regulator framework for MMC
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- Re: [PATCH 9/9] omap mmc host: Use disable_irq_nosync() from within irq handlers.
- From: Pierre Ossman <pierre@xxxxxxxxx>
- Re: [RFC] dspbridge: staging todo list
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [RFC] dspbridge: staging todo list
- From: omar ramirez <or.rmz1@xxxxxxxxx>
- Re: [PATCH] enabled alpha blender for OMAP2/3 DSS2 driver.
- From: InKi Dae <daeinki@xxxxxxxxx>
- Re: [PATCH] regulator core: fix double-free in regulator_register() error path
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] regulator core: fix double-free in regulator_register() error path
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 2/2] I2C: OMAP: overhaul the rev2+ interrupt service routine and omap_i2c_xfer_msg()
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/2] I2C: OMAP: use consolidated flags field rather than bitfields
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/2] I2C: OMAP: spurious IRQ fixes
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] OMAP: PM: make mach/pm.h OMAP1-specific
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] regulator core: fix double-free in regulator_register() error path
- From: David Brownell <david-b@xxxxxxxxxxx>
- [PATCH] OMAP2 H4: fix build by removing IRDA support
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] enabled alpha blender for OMAP2/3 DSS2 driver.
- From: InKi Dae <daeinki@xxxxxxxxx>
- Re: No 2.6.29 omap tag?
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: lcd rotation in omapfb_main.c
- From: Marek Vasut <marek.vasut@xxxxxxxxx>
- Re: [PATCH][UPDATED] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- RE: [PATCH][UPDATED] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
- Re: [PATCH][UPDATED] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- No 2.6.29 omap tag?
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [PATCH][UPDATED] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- [PATCH] regulator core: fix double-free in regulator_register() error path
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: git pull request for omap fixes, v4 (Re: [PATCH 00/11] Omap fixes for 2.6.30-rc1)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: git pull request for omap fixes, v4 (Re: [PATCH 00/11] Omap fixes for 2.6.30-rc1)
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: git pull request for omap fixes, v4 (Re: [PATCH 00/11] Omap fixes for 2.6.30-rc1)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: n800 high idle power consumption
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: [PATCH] enabled alpha blender for OMAP2/3 DSS2 driver.
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: n800 high idle power consumption
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] enabled alpha blender for OMAP2/3 DSS2 driver.
- From: InKi Dae <daeinki@xxxxxxxxx>
- Re: [patch 2.6.29-rc3-git] input: twl4030_keypad driver
- From: David Brownell <david-b@xxxxxxxxxxx>
- RE: Problems while designing TPS65023 regulator driver
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- RE: [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- Re: [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- Re: Problems while designing TPS65023 regulator driver
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: Problems while designing TPS65023 regulator driver
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- Re: Problems while designing TPS65023 regulator driver
- From: Trilok Soni <soni.trilok@xxxxxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: n800 high idle power consumption
- From: Kalle Valo <kalle.valo@xxxxxx>
- n800 high idle power consumption
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [patch 2.6.29-rc3-git] input: twl4030_keypad driver
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Fix OMAP_CHIP_INIT usage
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: 4 Problems in OMAP3430 DVFS (SmartReflex, Cpufreq)
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: Problems while designing TPS65023 regulator driver
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: usb-to-eth dongle on usb ehci host port
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] twl4030: Add some error checking to twl4030 init
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH 1/1] Activate VDD1, VDD2 and VPLL1 at startup
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: usb-to-eth dongle on usb ehci host port
- From: twebb <taliaferro62@xxxxxxxxx>
- usb-to-eth dongle on usb ehci host port
- From: twebb <taliaferro62@xxxxxxxxx>
- Re: stlc45xx in 2.6.30-rc1
- From: green <greenfreedom10@xxxxxxxxx>
- Re: [PATCH 1/1] Activate VDD1, VDD2 and VPLL1 at startup
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [alsa-devel] trouble with alsa, wolfson, and TI OMAP35xx McBSP
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- Re: git pull request for omap fixes, v3 (Re: [PATCH 00/11] Omap fixes for 2.6.30-rc1)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- stlc45xx in 2.6.30-rc1
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP: Fix tusb6010 init error and compilation warning
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: trouble with alsa, wolfson, and TI OMAP35xx McBSP
- From: "Alejandro Blanca G." <alex.blanca@xxxxxxxxx>
- RE: PM: 4 Problems in OMAP3430 DVFS (SmartReflex, Cpufreq)
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: n800 build error in clock24xx.c: 'secure_32k_ck' undeclared
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: Problems while designing TPS65023 regulator driver
- From: Trilok Soni <soni.trilok@xxxxxxxxx>
- Re: [PATCH] DSPBRIDGE: Replacing custom mapping implementation
- From: Ameya Palande <2ameya@xxxxxxxxx>
- [PATCH] PM: Disable usb host HW save and restore
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH 0/1] Fix OMAP_CHIP_INIT usage
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH 1/1] Activate VDD1, VDD2 and VPLL1 at startup
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- [PATCH] DSPBRIDGE: Replacing custom mapping implementation
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- [PATCH] ARM: OMAP3: Fix OMAP_CHIP_INIT usage
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH 0/1] Fix OMAP_CHIP_INIT usage
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- Re: trouble with alsa, wolfson, and TI OMAP35xx McBSP
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
- Re: PM: 4 Problems in OMAP3430 DVFS (SmartReflex, Cpufreq)
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: [PATCH] ARM: OMAP2/3: Reorganize Makefile to add omap4 support (Re: [PATCH 7/7][RFC] OMAP4: Enable basic build support.)
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- [PATCH] ARM: OMAP: Fix tusb6010 init error and compilation warning
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: [PATCH 3/7][RFC] OMAP4: Update common omap platform headers.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2/3: Reorganize Makefile to add omap4 support (Re: [PATCH 7/7][RFC] OMAP4: Enable basic build support.)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: trouble with alsa, wolfson, and TI OMAP35xx McBSP
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- RE: [PATCH 3/7][RFC] OMAP4: Update common omap platform headers.
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: [PATCH] ARM: OMAP2/3: Reorganize Makefile to add omap4 support (Re: [PATCH 7/7][RFC] OMAP4: Enable basic build support.)
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- PM: 4 Problems in OMAP3430 DVFS (SmartReflex, Cpufreq)
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: Query: Num GPIO lines
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- [PATCH]RESEND:OMAP3:configs: rename sdp and ldp defconfig
- From: Nishanth Menon <nm@xxxxxx>
- RE: LDP broken in 2.6.30-rc 2
- From: "Christensen, Mikkel" <mlc@xxxxxx>
- Re: [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/7][RFC] OMAP4: Update common omap platform headers.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: OMAP2/3: Reorganize Makefile to add omap4 support (Re: [PATCH 7/7][RFC] OMAP4: Enable basic build support.)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [alsa-devel] trouble with alsa, wolfson, and TI OMAP35xx McBSP
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: trouble with alsa, wolfson, and TI OMAP35xx McBSP
- From: "Menon, Nishanth" <nm@xxxxxx>
- trouble with alsa, wolfson, and TI OMAP35xx McBSP
- From: twebb <taliaferro62@xxxxxxxxx>
- Re: lcd rotation in omapfb_main.c
- From: twebb <taliaferro62@xxxxxxxxx>
- [PATCH 1/1] Activate VDD1, VDD2 and VPLL1 at startup
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- Re: SDIO card for wifi
- From: kasi viswanathan <kasi.wireless@xxxxxxxxx>
- Re: lcd rotation in omapfb_main.c
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- [PATCH] TWL4030: Make sure the regulator is active after calling twl4030reg_enable
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- [PATCH] TWL4030: add function to send PB messages
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- [PATCH] TWL4030: Make sure the regulator is active after calling twl4030reg_enable
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- [PATCH] TWL4030: add function to send PB messages
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- Re: lcd rotation in omapfb_main.c
- From: Ashwin Bihari <abihari@xxxxxxxxx>
- Re: [PATCH] twl4030: Add some error checking to twl4030 init
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- Re: lcd rotation in omapfb_main.c
- From: twebb <taliaferro62@xxxxxxxxx>
- RE: dma_alloc_coherent fragmentation
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: dma_alloc_coherent fragmentation
- From: pramod gurav <pramodforum@xxxxxxxxx>
- RE: dma_alloc_coherent fragmentation
- From: "Gupta, Ramesh" <grgupta@xxxxxx>
- RE: dma_alloc_coherent fragmentation
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: [PATCH 3/3] OMAP2/3 V4L2 Display Driver
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- Re: dma_alloc_coherent fragmentation
- From: pramod gurav <pramodforum@xxxxxxxxx>
- Re: [PATCH 3/3] OMAP2/3 V4L2 Display Driver
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- RE: dma_alloc_coherent fragmentation
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: dma_alloc_coherent fragmentation
- From: pramod gurav <pramodforum@xxxxxxxxx>
- [PATCH] OMAP2/3: DMA: implement trans copy and const fill
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- [PATCH 3/3] OMAP2/3 V4L2 Display Driver
- From: Hardik Shah <hardik.shah@xxxxxx>
- RE: [PATCH 0/3] V4L2 driver for OMAP2/3 with new CIDs.
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- Re: [PATCH] ARM: OMAP: Update contact address of I2C registration helper
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: Previewer and resizer demo
- From: Felix Radensky <felix@xxxxxxxxxxxxxxxx>
- RE: [Review PATCH 3/3] OMAP2/3 V4L2 Display Driver
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- RE: Previewer and resizer demo
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: Suggestion and patch about the alarm of TWL4030-RTC
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: Previewer and resizer demo
- From: Felix Radensky <felix@xxxxxxxxxxxxxxxx>
- Re: Suggestion and patch about the alarm of TWL4030-RTC
- From: David Brownell <david-b@xxxxxxxxxxx>
- RE: [PATCH 7/7][RFC] OMAP4: Enable basic build support.
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Suggestion and patch about the alarm of TWL4030-RTC
- From: Kim Kyuwon <q1.kim@xxxxxxxxxxx>
- RE: [PATCH 2/7][RFC] OMAP4: Create board support for OMAP_4430SDP.
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: [PATCH 5/7][RFC] OMAP4: Update common omap machine specific sources.
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: [PATCH 3/7][RFC] OMAP4: Update common omap platform headers.
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- [PATCH] DSPBRIDGE: Replacing custom implementation for Mapping
- From: Omar Ramirez Luna <x00omar@xxxxxx>
- RE: Resending with Ameya's fixes included.
- From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
- Resending with Ameya's fixes included.
- From: Omar Ramirez Luna <x00omar@xxxxxx>
- [RESEND][PATCH] DSPBRIDGE: Replacing custom implementation for Mapping
- From: Omar Ramirez Luna <x00omar@xxxxxx>
- [RFC] Updated 3430SDP and LDP camera drivers
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: lcd rotation in omapfb_main.c
- From: Marek Vasut <marek.vasut@xxxxxxxxx>
- lcd rotation in omapfb_main.c
- From: twebb <taliaferro62@xxxxxxxxx>
- Re: RFC for supporting multiple PMICs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: [PATCH 7/7][RFC] OMAP4: Enable basic build support.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 6/7][RFC] OMAP4: Clock hack since clock management framework not in.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 5/7][RFC] OMAP4: Update common omap machine specific sources.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 4/7][RFC] OMAP4: Update common omap platform common sources.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/7][RFC] OMAP4: Update common omap platform headers.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/7][RFC] OMAP4: Create board support for OMAP_4430SDP.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] DSPBRIDGE: Various fixes for tiomap3430.c
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- RE: [PATCH 0/7] OMAP4: Patch series
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: [PATCH 1/7][RFC] OMAP4: Create architecture macros and config entries.
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: Previewer and resizer demo
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: [PATCH 5/7][RFC] OMAP4: Update common omap machine specific sources.
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Previewer and resizer demo
- From: Felix Radensky <felix@xxxxxxxxxxxxxxxx>
- Re: git pull request for omap fixes, v2 (Re: [PATCH 00/11] Omap fixes for 2.6.30-rc1)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH 4/7][RFC] OMAP4: Update common omap platform common sources.
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: [PATCH 4/7][RFC] OMAP4: Update common omap platform common sources.
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- LCD display orientation on omap
- From: twebb <taliaferro62@xxxxxxxxx>
- RE: [PATCH 5/7][RFC] OMAP4: Update common omap machine specific sources.
- From: "Dasgupta, Romit" <romit@xxxxxx>
- RE: [PATCH 4/7][RFC] OMAP4: Update common omap platform common sources.
- From: "Premi, Sanjeev" <premi@xxxxxx>
- [PATCH 0/7] OMAP4: Patch series
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- [PATCH 6/7][RFC] OMAP4: Clock hack since clock management framework not in.
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH 4/7][RFC] OMAP4: Update common omap platform common sources.
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH 7/7][RFC] OMAP4: Enable basic build support.
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH 3/7][RFC] OMAP4: Update common omap platform headers.
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH 2/7][RFC] OMAP4: Create board support for OMAP_4430SDP.
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH 1/7][RFC] OMAP4: Create architecture macros and config entries.
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH 5/7][RFC] OMAP4: Update common omap machine specific sources.
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- RE: LDP broken in 2.6.30-rc 2
- From: "Christensen, Mikkel" <mlc@xxxxxx>
- Re: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Dongsoo, Nathaniel Kim" <dongsoo.kim@xxxxxxxxx>
- RE: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- [PATCH] OMAP: Remove IRQ hardcoding from serial.c
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- RE: [Review PATCH 3/3] OMAP2/3 V4L2 Display Driver
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- RE: 2.6.29 and SDP3430 <now 2.6.30-rc2, q3-2007 compiler error>
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Dongsoo, Nathaniel Kim" <dongsoo.kim@xxxxxxxxx>
- RE: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- RE: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- [PATCH] OMAP: HSMMC: Do not enable buffer ready interrupt if using DMA
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: LDP broken in 2.6.30-rc 2
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again
- From: Koen Kooi <koen@xxxxxxxxxxxxxxx>
- Re: [patch 2.6.29-rc3-git] input: twl4030_keypad driver
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: git pull request for omap fixes, v2 (Re: [PATCH 00/11] Omap fixes for 2.6.30-rc1)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: 2.6.29 and SDP3430 <now 2.6.30-rc2, q3-2007 compiler error>
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- [PATCH] DSPBRIDGE: Replacing custom implementation for Mapping
- From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
- RE: 2.6.29 and SDP3430 <now 2.6.30-rc2, q3-2007 compiler error>
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- RE: LDP broken in 2.6.30-rc 2
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v3
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: 2.6.29 and SDP3430
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: [PM PATCH] OMAP3: PM: Save and restore I2C wakeup sources
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH take 2] PM: OMAP: Fix build with CONFIG_OMAP_PM_NONE set
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] twl4030: Add some error checking to twl4030 init
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
- RE: [PATCH] twl4030: Add some error checking to twl4030 init
- From: "Premi, Sanjeev" <premi@xxxxxx>
- LDP broken in 2.6.30-rc 2
- From: "Christensen, Mikkel" <mlc@xxxxxx>
- Compilation Issue with OMAP_SMARTREFLEX, CONFIG_USB_ARCH_HAS_EHCI
- From: Dmitry Shvedov <dmt.shvedov@xxxxxxxxx>
- Re: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [APPLIED] n800 build error in clock24xx.c: 'secure_32k_ck' undeclared
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: n800 build error in clock24xx.c: 'secure_32k_ck' undeclared
- From: Paul Walmsley <paul@xxxxxxxxx>
- RFC for supporting multiple PMICs
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- Re: n800 build error in clock24xx.c: 'secure_32k_ck' undeclared
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: n800 build error in clock24xx.c: 'secure_32k_ck' undeclared
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] musb_hdrc: Fix compile omap3 boards if CONFIG_PM is not set
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/02] OMAP3 clock: Remove virtual clock nodes
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: ehci problem on OMAP35xx
- From: Remith Ravi <remithmailinglist@xxxxxxxxx>
- RE: [PATCH] [DSPBRIDGE] Various compile warning fixes
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- [PATCH] twl4030: Add some error checking to twl4030 init
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
- RE: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Dongsoo, Nathaniel Kim" <dongsoo.kim@xxxxxxxxx>
- RE: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- RE: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: [PATCH] omap_iommu: Correct function name in the comment
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- SDIO card for wifi
- From: Kalpesh Rathod <kalpeshrathod@xxxxxxxxx>
- RE: [PATCH] [DSPBRIDGE] Various compile warning fixes
- From: <mika.kukkonen@xxxxxxxxx>
- Re: n800 build error in clock24xx.c: 'secure_32k_ck' undeclared
- From: green <greenfreedom10@xxxxxxxxx>
- Re: 2.6.30-rc1 and BeagleBoard: MMC card / Voltage Regulator issues
- From: "Eugeny S. Mints" <eugeny.mints@xxxxxxxxx>
- Re: n800 build error in clock24xx.c: 'secure_32k_ck' undeclared
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: n800 build error in clock24xx.c: 'secure_32k_ck' undeclared
- From: green <greenfreedom10@xxxxxxxxx>
- Re: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: Dongsoo Kim <dongsoo.kim@xxxxxxxxx>
- Re: [PATCH 0/9] Fix unsafe disable_irq usage
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- RE: 2.6.29 and SDP3430
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- n800 build error in clock24xx.c: 'secure_32k_ck' undeclared
- From: Kalle Valo <kalle.valo@xxxxxx>
- RE: [PATCH][UPDATED] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- RE: [PATCH][UPDATED] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
- [PATCH][Take 2] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- Re: [PATCH][UPDATED] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- Re: [PATCH][UPDATED] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- [PATCH][UPDATED] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP: Update contact address of I2C registration helper
- From: Riku Voipio <riku.voipio@xxxxxx>
- Re: [PATCH] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- Re: [PATCH] OMAP3: lessen amount of noisy messages
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- RE: [PATCH] [DSPBRIDGE] Various compile warning fixes
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- RE: [PATCH] [DSPBRIDGE] Various compile warning fixes
- From: "Gupta, Ramesh" <grgupta@xxxxxx>
- [PATCH] omap_iommu: Correct function name in the comment
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- Re: [PATCH] OMAP3: lessen amount of noisy messages
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- [PATCH] ARM: OMAP: Update contact address of I2C registration helper
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- [PATCH] OMAP: Make sure all resources used by the gpio-switch IRQ handler are initialized before use.
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- [PATCH] [DSPBRIDGE] Various compile warning fixes
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- Re: [PATCH] OMAP3: lessen amount of noisy messages
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: Fwd: dss2 with dsi
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- [PATCH 00/02] OMAP3 clock: Remove virtual clock nodes
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 02/02] OMAP3 clock: Update cpufreq driver
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 01/02] OMAP3 clock: Remove virt_vdd1/2_prcm_set
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- git pull request for omap fixes (Re: [PATCH 00/11] Omap fixes for 2.6.30-rc1)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Fwd: dss2 with dsi
- From: Rebecca Schultz Zavin <rebecca@xxxxxxxxxxx>
- omap3530 usb host problems follow-up
- From: twebb <taliaferro62@xxxxxxxxx>
- RE: ehci problem on OMAP35xx
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: ehci problem on OMAP35xx
- From: twebb <taliaferro62@xxxxxxxxx>
- RE: ehci problem on OMAP35xx
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- RE: Unable to mount android rootfs
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- RE: Unable to mount android rootfs
- From: "Menon, Nishanth" <nm@xxxxxx>
- Unable to mount android rootfs
- From: <harish.hanumanthappa@xxxxxxxxx>
- Re: [PATCH take 2] PM: OMAP: Fix build with CONFIG_OMAP_PM_NONE set
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: YUV rotation support for DSS2 - 2.6.29 [WAS Re: Hello Tomi Valkeinen, I have some questions about dss2 driver.]
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: Fwd: dss2 with dsi
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: [PATCH take 2] PM: OMAP: Fix build with CONFIG_OMAP_PM_NONE set
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- RE: ehci problem on OMAP35xx
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- [PATCH 9/9] omap mmc host: Use disable_irq_nosync() from within irq handlers.
- From: Ben Nizette <bn@xxxxxxxxxxxxxxx>
- [PATCH 0/9] Fix unsafe disable_irq usage
- From: Ben Nizette <bn@xxxxxxxxxxxxxxx>
- Fwd: dss2 with dsi
- From: Rebecca Schultz Zavin <rebecca@xxxxxxxxxxx>
- Re: YUV rotation support for DSS2 - 2.6.29 [WAS Re: Hello Tomi Valkeinen, I have some questions about dss2 driver.]
- From: Tim Yamin <plasm@xxxxxxxxx>
- Re: [PATCH] OMAP3: lessen amount of noisy messages
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH] ARM: OMAP: Fix merge errors in board-overo.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 05/10] OMAP3: SR: Disable SR autocomp only for CORE trans
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- Re: [PATCH] OMAP3: lessen amount of noisy messages
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- ehci problem on OMAP35xx
- From: twebb <taliaferro62@xxxxxxxxx>
- Re: [PATCH] OMAP3: lessen amount of noisy messages
- From: Artem Bityutskiy <dedekind@xxxxxxxxxxxxx>
- Re: [PATCH] OMAP3: lessen amount of noisy messages
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP3: lessen amount of noisy messages
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- RE: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- RE: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- [PATCH 10/10] OMAP3: SR: Replace (0x1 << n) with BIT(n)
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 09/10] OMAP3: SR: Replace SR_PASS/FAIL,SR_TRUE/FALSE
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 07/10] OMAP3: SR: Replace printk's with pr_* calls
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 08/10] OMAP3: SR: Remove redundant defines
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 05/10] OMAP3: SR: Disable SR autocomp only for CORE trans
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 06/10] OMAP3: SR: Reset voltage level on SR disable
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 04/10] OMAP3: SR: Use sysclk for SR CLKLENGTH calc
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 03/10] OMAP3: SR: Update VDD1/2 voltages at boot
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 02/10] OMAP3: PM: Additional api's in omap-pm layer
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 01/10] OMAP3: SR: Fix init voltage on OPP change
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- 2.6.30-rc1 and BeagleBoard: MMC card / Voltage Regulator issues
- From: Thomas Winkler <tc@xxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3: lessen amount of noisy messages
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- [PATCH] DSPBRIDGE: CLK_Enable and CLK_Disable Code cleanup
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- RE: YUV rotation support for DSS2 - 2.6.29 [WAS Re: Hello Tomi Valkeinen, I have some questions about dss2 driver.]
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- Supporting multiple PMICs
- From: "Premi, Sanjeev" <premi@xxxxxx>
- RE: YUV rotation support for DSS2 - 2.6.29 [WAS Re: Hello Tomi Valkeinen, I have some questions about dss2 driver.]
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- [PATCH 11/11] ARM: OMAP3: Clean up spurious interrupt check logic
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 10/11] ARM: OMAP3: Fixed spurious IRQ issue for GPIO interrupts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 09/11] ARM: OMAP3: remove duplicated #include
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 08/11] ARM: OMAP2/3: GPIO: do not attempt to wake-enable
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 07/11] ARM: OMAP2: possible division by 0
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 06/11] ARM: OMAP2: Remove defines and resource init for OMAP24XX EAC
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 05/11] ARM: OMAP1: Fix mmc_set_power GPIO usage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 04/11] ARM: OMAP1: Simplify board-h2 MMC setup
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 03/11] ARM: OMAP: MMC: Remove unused power_pin
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 02/11] ARM: OMAP: Remove old dead gpio expander code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 01/11] ARM: OMAP: Fix for possible race condition in omap_free_dma()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 00/11] Omap fixes for 2.6.30-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 7/7] OMAP2/3 GPTIMER: allow system tick GPTIMER to be changed in board-*.c files
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: 2.6.29 and SDP3430
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- RE: 2.6.29 and SDP3430
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/7] OMAP24xx/OMAP25xx clock: fix broken cpu_mask code
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 1/7] OMAP24xx/25xx clock: init osc_ck, sys_ck internal lists early
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 6/7] OMAP: dmtimer: enable all timers to be wakeup events
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 7/7] OMAP2/3 GPTIMER: allow system tick GPTIMER to be changed in board-*.c files
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 5/7] OMAP3 GPTIMER: fix GPTIMER12 IRQ
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 4/7] OMAP1: clock: Typo fix for clock in omap1
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 3/7] OMAP3: clock: Camera module doesn't have IDLEST bit
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/7] OMAP2xxx clock: init osc_ck, sys_ck internal lists early
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 2/7] OMAP2xxx clock: fix broken cpu_mask code
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/7] OMAP clock fixes for v2.6.30-rc1
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v3] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again
- From: Koen Kooi <koen@xxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v3
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: YUV rotation support for DSS2 - 2.6.29 [WAS Re: Hello Tomi Valkeinen, I have some questions about dss2 driver.]
- From: Tim Yamin <plasm@xxxxxxxxx>
- RE: YUV rotation support for DSS2 - 2.6.29 [WAS Re: Hello Tomi Valkeinen, I have some questions about dss2 driver.]
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- [PATCH] ARM: OMAP: Fix merge errors in board-overo.c
- From: Steve Sakoman <sakoman@xxxxxxxxx>
- Re: [RFC] Save HSMMC registers if core is powered off
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [RFC] Save HSMMC registers if core is powered off
- From: Russ Dill <russ.dill@xxxxxxxxx>
- [RFC] Save HSMMC registers if core is powered off
- From: Russ Dill <russ.dill@xxxxxxxxx>
- Re: 2.6.29 PM and CPUIDLE
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: omap-clock-fixes branch available
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] Typo fix for clock in omap1
- From: Paul Walmsley <paul@xxxxxxxxx>
- 2.6.29 PM and CPUIDLE
- From: Jean Pihet <jpihet@xxxxxxxxxx>
- [PATCH] Typo fix for clock in omap1
- From: Arun KS <arunks@xxxxxxxxxxxxxxxxxxxx>
- omap_mcbsp_request fails for OMAP1 platforms
- From: Arun KS <getarunks@xxxxxxxxx>
- [PATCH] Fix the size of twl4030 script
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- [PATCH] Fix the size of twl4030 script
- From: Kyuwon Kim <q1.kim@xxxxxxxxxxx>
- omap-clock-fixes branch available
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: 2.6.29 and SDP3430
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- [PATCH] OMAP3: Rename configuration files
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- RE: 2.6.29 and SDP3430
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- RE: 2.6.29 and SDP3430
- From: "Menon, Nishanth" <nm@xxxxxx>
- [PATCH] OMAP3: lessen amount of noisy messages
- From: Artem Bityutskiy <dedekind@xxxxxxxxxxxxx>
- RE: 2.6.29 and SDP3430
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: 2.6.29 and SDP3430 [needs CSL2008q3]
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- RE: 2.6.29 and SDP3430
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- Re: 2.6.29 and SDP3430
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- 2.6.29 and SDP3430
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: Preempt-RT on OMAP3?
- From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
- Re: Preempt-RT on OMAP3?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [RFC][PATCH] OMAP3: Clock FW: Camera module doesn't have IDLEST bit
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] HSMMC: mmc_omap_irq: Do not expect cmd/data to be non-null when CC/TC occurs
- From: Pierre Ossman <drzeus-mmc@xxxxxxxxx>
- Re: [PATCH] mmc: Fix compile for omap_hsmmc.c (Re: New build error?)
- From: Pierre Ossman <pierre@xxxxxxxxx>
- Re: [PATCH] omap_hsmmc: Flush posted write to IRQ
- From: Pierre Ossman <pierre@xxxxxxxxx>
- [PATCH take 2] PM: OMAP: Fix build with CONFIG_OMAP_PM_NONE set
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- Latest TI DSP Bridge Patches
- From: Ameya Palande <2ameya@xxxxxxxxx>
- [PATCH] HSMMC: mmc_omap_irq: Do not expect cmd/data to be non-null when CC/TC occurs
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH] PM: OMAP: Fix build with CONFIG_OMAP_PM_NONE set
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- Re: Preempt-RT on OMAP3?
- From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
- [PATCH] mmc: Fix compile for omap_hsmmc.c (Re: New build error?)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Latest tmlid/linux-omap-2.6.git changes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH] omap_hsmmc: Flush posted write to IRQ
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Latest tmlid/linux-omap-2.6.git changes
- From: Russ Dill <russ.dill@xxxxxxxxx>
- RE: [PATCH 1/4] [OMAPZOOM] [UPDATE] DSPBRIDGE: Memory lock for DMM.
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH 1/4] [OMAPZOOM] [UPDATE] DSPBRIDGE: Memory lock for DMM.
- From: Ameya Palande <2ameya@xxxxxxxxx>
- RE: [PATCH 1/4] [OMAPZOOM] [UPDATE] DSPBRIDGE: Memory lock for DMM.
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH 1/4] [OMAPZOOM] [UPDATE] DSPBRIDGE: Memory lock for DMM.
- From: Ameya Palande <2ameya@xxxxxxxxx>
- RE: [PATCH 1/4] [OMAPZOOM] [UPDATE] DSPBRIDGE: Memory lock for DMM.
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH 1/4] [OMAPZOOM] [UPDATE] DSPBRIDGE: Memory lock for DMM.
- From: Ameya Palande <2ameya@xxxxxxxxx>
- New build error?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: [PATCH 1/4] [OMAPZOOM] [UPDATE] DSPBRIDGE: Memory lock for DMM.
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- Re: YUV rotation support for DSS2 - 2.6.29 [WAS Re: Hello Tomi Valkeinen, I have some questions about dss2 driver.]
- From: Tim Yamin <plasm@xxxxxxxxx>
- [APPLIED] [patch omap-git] ehci-omap buildfix
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [APPLIED] [PATCH 3/3] OMAP: dmtimer: enable all timers to be wakeup events
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH 3/3] OMAP: dmtimer: enable all timers to be wakeup events
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH 2/3] OMAP2/3 GPTIMER: allow system tick GPTIMER to be changed
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH 1/3] OMAP3 GPTIMER: fix GPTIMER12 IRQ
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [OMAP][sDMA]Fix for possible race condition in omap_free_dma()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Embedded Linux Conference
- From: "Dongsoo, Nathaniel Kim" <dongsoo.kim@xxxxxxxxx>
- USB EHCI Issue
- From: Remith Ravi <remithmailinglist@xxxxxxxxx>
- [PATCH] DSPBRIDGE: Unused pointer causing Memory Leaks
- From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
- Re: Embedded Linux Conference
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH] PM: OMAP: Fix build with CONFIG_OMAP_PM_NONE set
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [PATCH 00/02] OMAP3 clock: Remove virtual clock nodes
- From: Jean Pihet <jpihet@xxxxxxxxxx>
- RE: Benchmarking: POP flash vs. MMC?
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: [OMAP][sDMA]Fix for possible race condition in omap_free_dma()
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- RE: omap_wdt: modprobe fails
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: [PATCH] PM: OMAP: Fix build with CONFIG_OMAP_PM_NONE set
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- PM: omap_wdt: modprobe fails
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- RE: i2c_omap: arbitration lost
- From: "Menon, Nishanth" <nm@xxxxxx>
- [PATCH] PM: OMAP: Fix build with CONFIG_OMAP_PM_NONE set
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- RE: YUV rotation support for DSS2 - 2.6.29 [WAS Re: Hello Tomi Valkeinen, I have some questions about dss2 driver.]
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]