Hi,
The suspend/resume on Beagleboard has some problem due to bad memory timings.
Suspending for more than 5 to 10 seconds shows memory corruption.
The new chips on rev Cx boards are using 2 DDR chip selects and it looks like
the 2nd memory part is not correctly put into self refresh. As an
experimentation I tried the same kernel with 'mem=128M' and it resumes
correctly after 1 min in suspend.
I could not find the latest DDR detailed specs from Micron. The part number is
MT29C2G48MAKLCJI-6 IT. Are those available? Is this part identical to 2 1Gb
parts?
Now for the code in the kernel, there are some changes needed to support 2
CS'es:
- the SDRC parameters need to be updated for the new memory part
- the SDRC parameters need to include the ACTIM_CTRL_A_0, ACTIM_CTRL_A_1,
ACTIM_CTRL_B_0, ACTIM_CTRL_B_1, RFR_CTRL_0 and RFR_CTRL_1 registers. Since
the parameters for the 2nd CS are the same, this can be avoided by writing
the same values to the 2 sets of registers
- is there a need to differentiate between 1Gb and 2Gb chips, or can we just
write the same params for both CS'es even if only one is being used?
- the 'configure_sdrc' function in arch/arm/mach-omap2/sram34xx.S needs to
program the 2 sets of registers. Here is a patch excerpt below. This patch
only does not help the suspend/resume though.
Any idea or suggestion?
Regards,
Jean
---
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 487fa86..6d5843a 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -175,15 +175,24 @@ wait_dll_unlock:
bne wait_dll_unlock
bx lr
configure_sdrc:
- ldr r11, omap3_sdrc_rfr_ctrl
+ ldr r11, omap3_sdrc_rfr_ctrl_0
str r0, [r11]
- ldr r11, omap3_sdrc_actim_ctrla
+ ldr r11, omap3_sdrc_rfr_ctrl_1
+ str r0, [r11]
+ ldr r11, omap3_sdrc_actim_ctrla_0
+ str r1, [r11]
+ ldr r11, omap3_sdrc_actim_ctrla_1
str r1, [r11]
- ldr r11, omap3_sdrc_actim_ctrlb
+ ldr r11, omap3_sdrc_actim_ctrlb_0
+ str r2, [r11]
+ ldr r11, omap3_sdrc_actim_ctrlb_1
str r2, [r11]
ldr r11, omap3_sdrc_mr_0
str r6, [r11]
ldr r6, [r11] @ posted-write barrier for SDRC
+ ldr r11, omap3_sdrc_mr_1
+ str r6, [r11]
+ ldr r6, [r11] @ posted-write barrier for SDRC
bx lr
omap3_sdrc_power:
@@ -194,14 +203,22 @@ omap3_cm_idlest1_core:
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
omap3_cm_iclken1_core:
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-omap3_sdrc_rfr_ctrl:
+omap3_sdrc_rfr_ctrl_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_actim_ctrla:
+omap3_sdrc_rfr_ctrl_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
+omap3_sdrc_actim_ctrla_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrlb:
+omap3_sdrc_actim_ctrla_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
+omap3_sdrc_actim_ctrlb_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_actim_ctrlb_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
omap3_sdrc_mr_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
+omap3_sdrc_mr_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
omap3_sdrc_dlla_status:
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
omap3_sdrc_dlla_ctrl:
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
