From: Rajendra Nayak <rnayak@xxxxxx> This patch converts all the bit defines from (0x1 << n) to BIT(n) in smartreflex driver Signed-off-by: Rajendra Nayak <rnayak@xxxxxx> --- arch/arm/mach-omap2/smartreflex.h | 42 +++++++++++++++++++------------------- 1 files changed, 21 insertions(+), 21 deletions(-) Index: linux-omap-2.6/arch/arm/mach-omap2/smartreflex.h =================================================================== --- linux-omap-2.6.orig/arch/arm/mach-omap2/smartreflex.h 2009-04-15 11:46:15.000000000 +0530 +++ linux-omap-2.6/arch/arm/mach-omap2/smartreflex.h 2009-04-15 11:46:15.000000000 +0530 @@ -43,22 +43,22 @@ #define GAIN_MAXLIMIT 16 #define R_MAXLIMIT 256 -#define SR1_CLK_ENABLE (0x1 << 6) -#define SR2_CLK_ENABLE (0x1 << 7) +#define SR1_CLK_ENABLE BIT(6) +#define SR2_CLK_ENABLE BIT(7) /* PRM_VP1_CONFIG */ #define PRM_VP1_CONFIG_ERROROFFSET (0x00 << 24) #define PRM_VP1_CONFIG_ERRORGAIN (0x20 << 16) #define PRM_VP1_CONFIG_INITVOLTAGE (0x30 << 8) /* 1.2 volt */ -#define PRM_VP1_CONFIG_TIMEOUTEN (0x1 << 3) -#define PRM_VP1_CONFIG_INITVDD (0x1 << 2) -#define PRM_VP1_CONFIG_FORCEUPDATE (0x1 << 1) -#define PRM_VP1_CONFIG_VPENABLE (0x1 << 0) +#define PRM_VP1_CONFIG_TIMEOUTEN BIT(3) +#define PRM_VP1_CONFIG_INITVDD BIT(2) +#define PRM_VP1_CONFIG_FORCEUPDATE BIT(1) +#define PRM_VP1_CONFIG_VPENABLE BIT(0) /* PRM_VP1_VSTEPMIN */ #define PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN (0x01F4 << 8) -#define PRM_VP1_VSTEPMIN_VSTEPMIN (0x01 << 0) +#define PRM_VP1_VSTEPMIN_VSTEPMIN BIT(0) /* PRM_VP1_VSTEPMAX */ #define PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX (0x01F4 << 8) @@ -74,14 +74,14 @@ #define PRM_VP2_CONFIG_ERRORGAIN (0x20 << 16) #define PRM_VP2_CONFIG_INITVOLTAGE (0x30 << 8) /* 1.2 volt */ -#define PRM_VP2_CONFIG_TIMEOUTEN (0x1 << 3) -#define PRM_VP2_CONFIG_INITVDD (0x1 << 2) -#define PRM_VP2_CONFIG_FORCEUPDATE (0x1 << 1) -#define PRM_VP2_CONFIG_VPENABLE (0x1 << 0) +#define PRM_VP2_CONFIG_TIMEOUTEN BIT(3) +#define PRM_VP2_CONFIG_INITVDD BIT(2) +#define PRM_VP2_CONFIG_FORCEUPDATE BIT(1) +#define PRM_VP2_CONFIG_VPENABLE BIT(0) /* PRM_VP2_VSTEPMIN */ #define PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN (0x01F4 << 8) -#define PRM_VP2_VSTEPMIN_VSTEPMIN (0x01 << 0) +#define PRM_VP2_VSTEPMIN_VSTEPMIN BIT(0) /* PRM_VP2_VSTEPMAX */ #define PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX (0x01F4 << 8) @@ -106,20 +106,20 @@ #define SRCONFIG_SENNENABLE_SHIFT 5 #define SRCONFIG_SENPENABLE_SHIFT 3 -#define SRCONFIG_SRENABLE (0x01 << 11) -#define SRCONFIG_SENENABLE (0x01 << 10) -#define SRCONFIG_ERRGEN_EN (0x01 << 9) -#define SRCONFIG_MINMAXAVG_EN (0x01 << 8) +#define SRCONFIG_SRENABLE BIT(11) +#define SRCONFIG_SENENABLE BIT(10) +#define SRCONFIG_ERRGEN_EN BIT(9) +#define SRCONFIG_MINMAXAVG_EN BIT(8) -#define SRCONFIG_DELAYCTRL (0x01 << 2) +#define SRCONFIG_DELAYCTRL BIT(2) #define SRCONFIG_CLKCTRL (0x00 << 0) /* AVGWEIGHT */ #define SR1_AVGWEIGHT_SENPAVGWEIGHT (0x03 << 2) #define SR1_AVGWEIGHT_SENNAVGWEIGHT (0x03 << 0) -#define SR2_AVGWEIGHT_SENPAVGWEIGHT (0x01 << 2) -#define SR2_AVGWEIGHT_SENNAVGWEIGHT (0x01 << 0) +#define SR2_AVGWEIGHT_SENPAVGWEIGHT BIT(2) +#define SR2_AVGWEIGHT_SENNAVGWEIGHT BIT(0) /* NVALUERECIPROCAL */ #define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 @@ -136,8 +136,8 @@ #define SR_CLKACTIVITY_IOFF_FOFF (0x00 << 20) #define SR_CLKACTIVITY_IOFF_FON (0x02 << 20) -#define ERRCONFIG_VPBOUNDINTEN (0x1 << 31) -#define ERRCONFIG_VPBOUNDINTST (0x1 << 30) +#define ERRCONFIG_VPBOUNDINTEN BIT(31) +#define ERRCONFIG_VPBOUNDINTST BIT(30) #define SR1_ERRWEIGHT (0x07 << 16) #define SR1_ERRMAXLIMIT (0x02 << 8) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
