Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- RE: [PATCH] musb: refresh nop transceiver support for musb
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- YUV rotation support for DSS2 - 2.6.29 [WAS Re: Hello Tomi Valkeinen, I have some questions about dss2 driver.]
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- Re: Preempt-RT on OMAP3?
- From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
- Re: Preempt-RT on OMAP3?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Preempt-RT on OMAP3?
- From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
- Re: Preempt-RT on OMAP3?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Preempt-RT on OMAP3?
- From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
- Re: Embedded Linux Conference
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Embedded Linux Conference
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Query: Num GPIO lines
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: Embedded Linux Conference
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- RE: i2c_omap: arbitration lost
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- [RFC][PATCH] OMAP3: Clock FW: Camera module doesn't have IDLEST bit
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- i2c_omap: arbitration lost
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: Preempt-RT on OMAP3?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Embedded Linux Conference
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Embedded Linux Conference
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Preempt-RT on OMAP3?
- From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
- Re: [PATCH] musb: refresh nop transceiver support for musb
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] musb: refresh nop transceiver support for musb
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] omap_hsmmc: Flush posted write to IRQ
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP: Don't warn user about expected behaviour in mmc-twl4030
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- RE: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [PATCH] musb: refresh nop transceiver support for musb
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- RE: [PATCH] musb: refresh nop transceiver support for musb
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- Re: [PATCH] musb: refresh nop transceiver support for musb
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH] musb: refresh nop transceiver support for musb
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [Review PATCH 3/3] OMAP2/3 V4L2 Display Driver
- From: Hardik Shah <hardik.shah@xxxxxx>
- [PATCH 2/3] New V4L2 CIDs for OMAP class of Devices.
- From: Hardik Shah <hardik.shah@xxxxxx>
- [PATCH 1/3] Documentation for new V4L2 CIDs added.
- From: Hardik Shah <hardik.shah@xxxxxx>
- [PATCH] omap_hsmmc: Flush posted write to IRQ
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- RE: [PATCH 1/3] Documentation for new V4L2 CIDs added.
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- RE: [PATCH 2/3] New V4L2 CIDs for OMAP class of Devices.
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- RE: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- RE: [PATCH 0/3] V4L2 driver for OMAP2/3 with new CIDs.
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- voltage_off_while_idle confusing in tmlind/linux-omap-2.6/pm.git
- From: Russ Dill <russ.dill@xxxxxxxxx>
- Re: Git tree updated, clocks and PM code reset to mainline
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: Preempt-RT on OMAP3?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] MMC: OMAP: Flush posted write to IRQ
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] MMC: OMAP: Flush posted write to IRQ
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: David Brownell <david-b@xxxxxxxxxxx>
- [patch omap-git] ehci-omap buildfix
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: Russ Dill <russ.dill@xxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- Re: Git tree updated, clocks and PM code reset to mainline
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Preempt-RT on OMAP3?
- From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v2
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] drivers/mmc/core/core.c: extend limit
- From: Pierre Ossman <drzeus-mmc@xxxxxxxxx>
- Re: Git tree updated, clocks and PM code reset to mainline
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] ARM: OMAP: Fix path for omap-sha1-md5 import of irqs.h
- From: Mike Auty <mike.auty@xxxxxxxxx>
- [PATCH 3/3] OMAP: dmtimer: enable all timers to be wakeup events
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 2/3] OMAP2/3 GPTIMER: allow system tick GPTIMER to be changed in board-*.c files
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/3] OMAP2/3: GPTIMER12 fixes
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/3] OMAP3 GPTIMER: fix GPTIMER12 IRQ
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v2
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: controlling CPU speed on N800/N810
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: controlling CPU speed on N800/N810
- From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
- controlling CPU speed on N800/N810
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: Git tree updated, clocks and PM code reset to mainline
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: Russ Dill <russ.dill@xxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: David Hagood <david.hagood@xxxxxxxxx>
- Re: [PATCH] OMAP: Don't warn user about expected behaviour in mmc-twl4030
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Benchmarking: POP flash vs. MMC?
- From: Russ Dill <russ.dill@xxxxxxxxx>
- twl4030-power scripts and wedge-on-reboot
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] OMAP: Don't warn user about expected behaviour in mmc-twl4030
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- Re: [PATCH] OMAP: Don't warn user about expected behaviour in mmc-twl4030
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v2
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- [APPLIED] [PATCH] OMAP: Don't warn user about expected behaviour in
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: Problems while designing TPS65023 regulator driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH] MMC: OMAP: flush posted write to IRQ
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] > [PATCH] ARM: OMAP3: Clean up spurious interrupt check logic
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v2
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- [APPLIED] [PATCH] GPIO: OMAP: Fixed spurious IRQ issue for GPIO interrupts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [mainline 2.6.29][PATCH] ARM: OMAP: Remove defines and resource
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [APPLIED] [linux-omap only][PATCH] ARM: OMAP: Partial revert for EAC IO
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Benchmarking: POP flash vs. MMC?
- From: david.hagood@xxxxxxxxx
- RE: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- RE: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 00/02] OMAP3 clock: Remove virtual clock nodes
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 02/02] OMAP3 clock: Update cpufreq driver
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 01/02] OMAP3 clock: Remove virt_vdd1/2_prcm_set
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 00/02] OMAP3 clock: Remove virtual clock nodes
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 10/10] OMAP3: SR: Replace (0x1 << n) with BIT(n)
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 09/10] OMAP3: SR: Replace SR_PASS/FAIL,SR_TRUE/FALSE
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 08/10] OMAP3: SR: Remove redundunt defines
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 07/10] OMAP3: SR: Replace printk's with pr_* calls
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 06/10] OMAP3: SR: Reset voltage level on SR disable
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 05/10] OMAP3: SR: Disable SR autocomp only for CORE trans
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 04/10] OMAP3: SR: Use sysclk for SR CLKLENGTH calc
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 03/10] OMAP3: SR: Update VDD1/2 voltages at boot
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 02/10] OMAP3: PM: Additional api's in omap-pm layer
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 01/10] OMAP3: SR: Fix init voltage on OPP change
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 00/10] OMAP3: SR: Fixes in Smartreflex driver
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- Re: Git tree updated, clocks and PM code reset to mainline
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] OMAP3: PM: Add the wakeup source driver, v3
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v2
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: Problems while designing TPS65023 regulator driver
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- RE: Problems while designing TPS65023 regulator driver
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- [PATCH] GPIO: OMAP: Fixed spurious IRQ issue for GPIO interrupts
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Clean up spurious interrupt check logic
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- Re: Git tree updated, clocks and PM code reset to mainline
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- [mainline 2.6.29][PATCH] ARM: OMAP: Remove defines and resource init for OMAP24XX EAC
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- [linux-omap only][PATCH] ARM: OMAP: Partial revert for EAC IO address changes
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- RE: PM branch rebased to 2.6.29... for real this time
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- Git tree updated, clocks and PM code reset to mainline
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: [PATCH v3] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Clean up spurious interrupt check logic
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29... for real this time
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: Do early I/O mapping if spinlock debugging is enabled (Re: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: OMAP3: Clean up spurious interrupt check logic
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- RE: [PATCH 1/4] [OMAPZOOM] DSPBRIDGE: Memory lock for DMM.
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH] ARM: Do early I/O mapping if spinlock debugging is enabled (Re: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3)
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Noisy, unusable touchscreen on LDP with 2.6.29
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- RE: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: PM branch rebased to 2.6.29... for real this time
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- [PATCH] ARM: Do early I/O mapping if spinlock debugging is enabled (Re: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] MMC: OMAP: flush posted write to IRQ
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] [OMAPZOOM] DSPBRIDGE: move platform_device_register under mach-omap2
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- [PATH] [OMAPZOOM] DSPBRIDGE: move platform_device_register under mach-omap2
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- Re: lowmemory android driver not needed?
- From: David Rientjes <rientjes@xxxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Fix HW SAVEANDRESTORE shift define
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Fix HW SAVEANDRESTORE shift define
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29... for real this time
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: lowmemory android driver not needed?
- From: Trilok Soni <soni.trilok@xxxxxxxxx>
- RE: [PATCH 1/4] [OMAPZOOM] DSPBRIDGE: Memory lock for DMM.
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH 1/4] [OMAPZOOM] DSPBRIDGE: Memory lock for DMM.
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- RE: [PATCH 1/4] [OMAPZOOM] DSPBRIDGE: Memory lock for DMM.
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH 1/4] [OMAPZOOM] DSPBRIDGE: Memory lock for DMM.
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- Re: [PATCH] DSPBRIDGE: Fix module build warnings
- From: Ameya Palande <2ameya@xxxxxxxxx>
- Re: [PATCH] DSPBRIDGE: Fix module build warnings
- From: Ameya Palande <2ameya@xxxxxxxxx>
- RE: [PATCH 1/4] [OMAPZOOM] DSPBRIDGE: Memory lock for DMM.
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- [PATCH 1/1] DSPBRIDGE: fix section mismatch warning
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH 2.6.29] MUSB: Use Mode 1 for TX if transfer size equals maxpacket
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- RE: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
- RE: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH 1/4] [OMAPZOOM] DSPBRIDGE: Memory lock for DMM.
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- Re: [PATCH 1/4] [OMAPZOOM] [UPDATE]DSPBRIDGE: Memory lock for DMM.
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- RE: PM branch rebased to 2.6.29... for real this time
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [PATCH] DSPBRIDGE: Fix module build warnings
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- Re: [PATCH] DSPBRIDGE: Fix module build warnings
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- [PATCH 0/1] Fix HW SAVEANDRESTORE shift define
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH] ARM: OMAP3: Fix HW SAVEANDRESTORE shift define
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- Re: PM branch rebased to 2.6.29... for real this time
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Russ Dill <russ.dill@xxxxxxxxx>
- RE: [PATCH 1/4] [OMAPZOOM] [UPDATE]DSPBRIDGE: Memory lock for DMM.
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- Re: [PATCH 3/3] ARM: OMAP3: Enable IO-CHAIN wakeup
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: OMAP3: Fix secure sram saving
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] ARM:OMAP3: Enable SDRC workaround for ES3.1
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] OMAP3: PM: Invoke omap3_save_scratchpad_contents() only once at boot time
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] OMAP3: PM: Fix compile error with 'CONFIG_OMAP_PM_SRF=y'
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: Problems bringing up new PM 2.6.29 tree on Logic 35x LV SOM
- From: Peter Barada <peterb@xxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Russ Dill <russ.dill@xxxxxxxxx>
- Re: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH] OMAP: Don't warn user about expected behaviour in mmc-twl4030
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- [RFC][PATCH] LAN9211 and LAN9221 NFS mounting and overrun fix on omap LDP
- From: Subramani Venkatesh <subbu31mani@xxxxxxxxx>
- Re: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] DSPBRIDGE: Fix module build warnings
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- Re: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] DSPBRIDGE: Logical code cleanup in bridge_open()
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- RE: PM branch rebased to 2.6.29... for real this time
- From: "Premi, Sanjeev" <premi@xxxxxx>
- find_task_by_vpid() not protected
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- RE: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- RE: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH] regulator: twl4030 VAUX3 supports 3.0V
- From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
- RE: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- [PATCH v3] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again
- From: Koen Kooi <koen@xxxxxxxxxxxxxxx>
- [PATCH v2] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again
- From: Koen Kooi <koen@xxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Russ Dill <russ.dill@xxxxxxxxx>
- RE: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- RE: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: [PATCH] OMAP3: PM: Add the wakeup source driver, v2
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Russ Dill <russ.dill@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] OMAP: Don't warn user about expected behaviour in mmc-twl4030
- From: David Brownell <david-b@xxxxxxxxxxx>
- [PATCH] OMAP: Don't warn user about expected behaviour in mmc-twl4030
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- RE: Query about DSP_Close() function
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: Query about DSP_Close() function
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Peter Barada <peterb@xxxxxxxxxxx>
- RE: Query about DSP_Close() function
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Russ Dill <russ.dill@xxxxxxxxx>
- Re: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Query about DSP_Close() function
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- RE: Problem in Flashing uboot on OSK5912c
- From: Manoj Kotnala <kotnala@xxxxxxxxxxxxxxxx>
- RE: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- RE: BT656 Support and MMDC support on top of OMAP3EVM
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- [RFC] Stand-alone Resizer/Previewer Driver support under V4L2 framework
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- [PATCH] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again
- From: Koen Kooi <koen@xxxxxxxxxxxxxxx>
- RE: PM branch rebased to 2.6.29
- From: "Premi, Sanjeev" <premi@xxxxxx>
- RE: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- Re: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 2/3] New V4L2 CIDs for OMAP class of Devices.
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 1/3] Documentation for new V4L2 CIDs added.
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: Latest l-o and usb gadget + NFS root problems
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- RE: PM branch rebased to 2.6.29
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: Latest l-o and usb gadget + NFS root problems
- From: Igor Mazanov <i.mazanov@xxxxxxxxx>
- Re: [PATCH 35/58] move omap_wdt's probe function to .devinit.text
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 35/58] move omap_wdt's probe function to .devinit.text
- From: Wim Van Sebroeck <wim@xxxxxxxxx>
- [OMAP][sDMA]Fix for possible race condition in omap_free_dma()
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- [PATCH] ARM: OMAP: Fix mailbox compile for 24xx (Re: OMAP2 build errors)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: OMAP2 build errors
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Latest l-o and usb gadget + NFS root problems
- From: Jarkko Nikula <jhnikula@xxxxxxxxx>
- RE: [PATCH 1/1] DSPBRIDGE: move platform_device_register under mach-omap2
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- OMAP2 build errors
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Russ Dill <russ.dill@xxxxxxxxx>
- Re: tidspbridge git repository
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/1] DSPBRIDGE: move platform_device_register under mach-omap2
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH 2/2] rx51_defconfig: add twl4030 to rx51 default configuration
- From: Atal Shargorodsky <ext-atal.shargorodsky@xxxxxxxxx>
- [PATCH 0/2] omap: twl4030_wdt: driver implementation
- From: Atal Shargorodsky <ext-atal.shargorodsky@xxxxxxxxx>
- [PATCH 1/2] omap: twl4030_wdt: twl4030 watchdog driver
- From: Atal Shargorodsky <ext-atal.shargorodsky@xxxxxxxxx>
- Re: Problem in Flashing uboot on OSK5912c
- From: Philip Balister <philip@xxxxxxxxxxxx>
- U-boot 2009.03 for OSK (OMAP5912)
- From: Philip Balister <philip@xxxxxxxxxxxx>
- Re: MMC2 support in linux-omap-2.6.27 (omap1)
- From: twebb <taliaferro62@xxxxxxxxx>
- RE: [PATCH 1/1] DSPBRIDGE: move platform_device_register under mach-omap2
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: tidspbridge git repository
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- Re: Latest l-o and usb gadget + NFS root problems
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: Latest l-o and usb gadget + NFS root problems
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- Latest l-o and usb gadget + NFS root problems
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- RE: [PATCH 2/4] [OMAPZOOM] DSPBRIDGE: Added checks for valid handles in critical places.
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- RE: [PATCH 1/4] [OMAPZOOM] DSPBRIDGE: Memory lock for DMM.
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- [PATCH 4/4] [OMAPZOOM] DSPBRIDGE: Handle Node operations when DSP is in error state
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- RE: [PATCH 3/4] [OMAPZOOM] DSPBRIDGE: Add DSP_MMU_DEBUG
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- [PATCH] [OMAPZOOM] DSPBRIDGE: Add DSP_MMU_DEBUG
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- [PATCH 2/4] [OMAPZOOM] DSPBRIDGE: Added checks for valid handles in critical places.
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- [PATCH 1/4] [OMAPZOOM] DSPBRIDGE: Memory lock for DMM.
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- [APPLIED] [PATCHv2] OMAP: McBSP: Do not enable or disable clocks on failed
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCHv2] OMAP: McBSP: Always maintain McBSP fclk while active
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Problems bringing up new PM 2.6.29 tree on Logic 35x LV SOM
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: Problems bringing up new PM 2.6.29 tree on Logic 35x LV SOM
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Problems bringing up new PM 2.6.29 tree on Logic 35x LV SOM
- From: Peter Barada <peterb@xxxxxxxxxxx>
- Re: Problem in Flashing uboot on OSK5912c
- From: Suresh Rajashekara <suresh@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/03] OMAP3 clock: Remove virtual clock nodes
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Jean Pihet <jpihet@xxxxxxxxxx>
- [PATCH] DSPBRIDGE: Only memset() is available in 2.6.29 kernel
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- Re: [PATCH] regulator: twl4030 VAUX3 supports 3.0V
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 2/3] ARM: OMAP3: Fix secure sram saving
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH 3/3] ARM: OMAP3: Enable IO-CHAIN wakeup
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH 1/3] ARM:OMAP3: Enable SDRC workaround for ES3.1
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH 0/1] ARM:OMAP3: Misc off mode fixes
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- Problem in Flashing uboot on OSK5912c
- From: Manoj Kotnala <kotnala@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] DSPBRIDGE: move platform_device_register under mach-omap2
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- Re: MMC2 support in linux-omap-2.6.27 (omap1)
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: 8-bit mode for OMAP MMC2
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH 5/5] LDP: Add support for built-in camera
- From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
- Re: n810 internal mmc boot
- From: green <greenfreedom10@xxxxxxxxx>
- PM branch rebased to 2.6.29... for real this time
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [APPLIED] [PATCH 2/2] ARM: OMAP: N8x0: Remove board-n800-audio.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH 1/2] ARM: OMAP: N8x0: Add retu-headset platform data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] drivers/mmc/core/core.c: extend limit
- From: Frans Meulenbroeks <fransmeulenbroeks@xxxxxxxxx>
- Re: MMC2 support in linux-omap-2.6.27 (omap1)
- From: twebb <taliaferro62@xxxxxxxxx>
- 8-bit mode for OMAP MMC2
- From: twebb <taliaferro62@xxxxxxxxx>
- Re: n810 internal mmc boot
- From: green <greenfreedom10@xxxxxxxxx>
- Re: omap3evm mmc problem
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: omap3evm mmc problem
- From: dfoley <dfoley@xxxxxxxxx>
- Re: Kernel support of the Zoom OMAP35X Development kit
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] OMAP clock: implement clock rate/parent change notifiers
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: Kernel support of the Zoom OMAP35X Development kit
- From: Ashwin Bihari <abihari@xxxxxxxxx>
- Re: [PM PATCH] OMAP3: PM: Save and restore I2C wakeup sources
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: omap3evm mmc problem
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Kernel support of the Zoom OMAP35X Development kit
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap3evm mmc problem
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Kernel support of the Zoom OMAP35X Development kit
- From: Ashwin Bihari <abihari@xxxxxxxxx>
- Kernel support of the Zoom OMAP35X Development kit
- From: Philip Balister <philip@xxxxxxxxxxxx>
- Re: [PATCH] regulator: twl4030 VAUX3 supports 3.0V
- From: David Brownell <david-b@xxxxxxxxxxx>
- [PATCH 2/2] OMAP2/3 clock: implement clock rate/parent change notifiers
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/2] OMAP clock: add clk_round_rate_parent (with OMAP2/3 implementation)
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/2] OMAP clock: implement clock rate/parent change notifiers
- From: Paul Walmsley <paul@xxxxxxxxx>
- MMC2 support in linux-omap-2.6.27 (omap1)
- From: twebb <taliaferro62@xxxxxxxxx>
- [PM PATCH] OMAP3: PM: Save and restore I2C wakeup sources
- From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
- Re: [PATCH 1/1] DSPBRIDGE: move platform_device_register under mach-omap2
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- Re: [PATCH 1/1] DSPBRIDGE: move platform_device_register under mach-omap2
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- RE: [PATCH 1/1] DSPBRIDGE: move platform_device_register under mach-omap2
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- [PATCH 1/1] DSPBRIDGE: move platform_device_register under mach-omap2
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- Re: n810 internal mmc boot
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- [PATCH 2/2] ARM: OMAP: N8x0: Remove board-n800-audio.c
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- [PATCH 1/2] ARM: OMAP: N8x0: Add retu-headset platform data
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: [PATCH] regulator: twl4030 VAUX3 supports 3.0V
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- MUSB oopses when changing mode on Beagle
- From: Paul Walmsley <paul@xxxxxxxxx>
- [APPLIED] [PATCH] SDRC: prevent null pointer dereference if sdrc_init_params
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH] OMAP3: MMC needs CONFIG_REGULATOR{,_TWL4030} now in
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH] RX51: connect VAUX3 to MMC2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP3: MMC needs CONFIG_REGULATOR{,_TWL4030} now in defconfigs
- From: David Brownell <david-b@xxxxxxxxxxx>
- [APPLIED] [PATCH] OMAP: mmc_twl4030 nicely disable vmmc_aux
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: tidspbridge git repository
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- [PATCH] OMAP3: MMC needs CONFIG_REGULATOR{,_TWL4030} now in defconfigs
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: Beagle can't mount rootfs from MMC after regulator updates
- From: Paul Walmsley <paul@xxxxxxxxx>
- Beagle can't mount rootfs from MMC after regulator updates
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Peter Barada <peterb@xxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Peter Barada <peterb@xxxxxxxxxxx>
- [APPLIED] [PATCH 2/5] omap mmc: Add better MMC low-level init
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP: mmc_twl4030 nicely disable vmmc_aux
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Peter Barada <peterb@xxxxxxxxxxx>
- Re: [PATCH 00/08] OMAP3: SR: Fixes in Smartreflex driver - Resending
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: How to test regulator driver?
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- [PATCH] RX51: connect VAUX3 to MMC2
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH] OMAP: mmc_twl4030 nicely disable vmmc_aux
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- RE: [PATCH] [OMAPZOOM]DSPBRIDGE bug in Bridge exit cleanup
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH] [OMAPZOOM]DSPBRIDGE bug in Bridge exit cleanup
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- RE: [PATCH] [OMAPZOOM]DSPBRIDGE bug in Bridge exit cleanup
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- RE: How to test regulator driver?
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- [PATCH 08/08] OMAP3: SR: Replace SR_PASS/FAIL,SR_TRUE/FALSE with standard kernel values
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH 07/08] OMAP3: SR: Remove redundunt defines
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH 06/08] OMAP3: SR: Replace printk's with pr_* calls
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH 05/08] OMAP3: SR: Reset voltage level on SR disable
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH 04/08] OMAP3: SR: Disable SR autocomp only for CORE trans
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH 03/08] OMAP3: SR: Use sysclk for SR CLKLENGTH calc
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH 02/08] OMAP3: SR: Update VDD1/2 voltages at boot
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH 01/08] OMAP3: SR: Fix init voltage on OPP change
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH 00/08] OMAP3: SR: Fixes in Smartreflex driver - Resending
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH 07/08] OMAP3: SR: Remove redundunt defines
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH] OMAP: McBSP: Fix legacy interrupts to clear their status
- From: ext-eero.nurkkala@xxxxxxxxx
- Re: [PATCH] [OMAPZOOM]DSPBRIDGE bug in Bridge exit cleanup
- From: Ameya Palande <2ameya@xxxxxxxxx>
- RE: [PATCH 1/1] Export notifier register functions for kernel module building
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH 1/1] Export notifier register functions for kernel module building
- From: "Gupta, Ramesh" <grgupta@xxxxxx>
- Re: [PATCH 1/1] Export notifier register functions for kernel module building
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 00/09] OMAP3 clock: Clock rate change notifiers
- From: Paul Walmsley <paul@xxxxxxxxx>
- Git pull request for omap updates
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/4] ARM: OMAP3: Add ADS7846 touchscreen support to Overo platform, v3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] Omap board updates for merge window after 2.6.29
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/12] Omap3 updates for the merge window after 2.6.29
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 11/12] ARM: OMAP3: Add base address definitions and resources for OMAP 3 IS, v2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 02/12] ARM: OMAP3: Store reboot mode in scratchpad on OMAP34xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] SDRC: prevent null pointer dereference if sdrc_init_params is null
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 01/07] OMAP3: SR: Fix init voltage on OPP change
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [OMAPZOOM][PATCH 2/3] DSPBRIDGE: Flooding the mailbox causes reliability issues (messages lost) and performance issues (busy looping waiting for a slot in the mailbox)
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- RE: [OMAPZOOM][PATCH 1/3] DSPBRIDGE: cleaning up the irq mailbox functions and related stuff
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- RE: [OMAPZOOM][PATCH 2/3] DSPBRIDGE: Flooding the mailbox causes reliability issues (messages lost) and performance issues (busy looping waiting for a slot in the mailbox)
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- Re: [OMAPZOOM][PATCH 2/3] DSPBRIDGE: Flooding the mailbox causes reliability issues (messages lost) and performance issues (busy looping waiting for a slot in the mailbox)
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- RE: [OMAPZOOM][PATCH 3/3] DSPBRIDGE: changed mail box timeout to avoid losing messages.
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- [OMAPZOOM][PATCH 3/3] DSPBRIDGE: changed mail box timeout to avoid losing messages.
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- [OMAPZOOM][PATCH 2/3] DSPBRIDGE: Flooding the mailbox causes reliability issues (messages lost) and performance issues (busy looping waiting for a slot in the mailbox)
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- [OMAPZOOM][PATCH 1/3] DSPBRIDGE: cleaning up the irq mailbox functions and related stuff
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- Re: tidspbridge git repository
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP: remove duplicated #include's
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [APPLIED] Overo broken after recent mainline merge
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [patch 2.6.28-rc8-omap git] sdp regulator init updates
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] [OMAPZOOM]DSPBRIDGE bug in Bridge exit cleanup
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH 2/5] omap mmc: Add better MMC low-level init
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [APPLIED] Overo broken after recent mainline merge
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- Re: [PATCH] DSPBRIDGE: Fix error handling in NODE_GetUUIDProps
- From: Seth Forshee <seth.forshee@xxxxxxxxx>
- Re: Problems with 2.6.29-rc8 and SDRAM on LDP
- From: Peter Barada <peterb@xxxxxxxxxxx>
- Re: [PATCH] DSPBRIDGE: Fix error handling in NODE_GetUUIDProps
- From: Seth Forshee <seth.forshee@xxxxxxxxx>
- [PATCH] DSPBRIDGE: Fix error handling in NODE_GetUUIDProps
- From: Ameya Palande <ameya.palande@xxxxxxxxx>
- RE: tidspbridge git repository
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: tidspbridge git repository
- From: Ameya Palande <2ameya@xxxxxxxxx>
- RE: tidspbridge git repository
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: tidspbridge git repository
- From: Ameya Palande <2ameya@xxxxxxxxx>
- RE: tidspbridge git repository
- From: "Menon, Nishanth" <nm@xxxxxx>
- tidspbridge git repository
- From: <ameya.palande@xxxxxxxxx>
- Re: Problems with 2.6.29-rc8 and SDRAM on LDP
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 00/09] OMAP3 clock: Clock rate change notifiers
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP3 clock: Access only available clock bits
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: Problems with 2.6.29-rc8 and SDRAM on LDP
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP3 clock: Access only available clock bits
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: [patch] twl4030-regulator: expose VPLL2
- From: Samuel Ortiz <sameo@xxxxxxxxxxxxxx>
- Problems with 2.6.29-rc8 and SDRAM on LDP
- From: Peter Barada <peterb@xxxxxxxxxxx>
- Re: [PATCH 0/10] omap_hsmmc patches
- From: Pierre Ossman <drzeus-mmc@xxxxxxxxx>
- Re: [PATCH 8/10] OMAP: HSMMC: Make driver support dynamic idle
- From: Pierre Ossman <drzeus-mmc@xxxxxxxxx>
- Re: n810 internal mmc boot
- From: green <greenfreedom10@xxxxxxxxx>
- Re: Things to do after 2.6.29 gets released
- From: Trilok Soni <soni.trilok@xxxxxxxxx>
- Re: omap3evm mmc problem
- From: David Brownell <david-b@xxxxxxxxxxx>
- [PATCH] ARM: OMAP: remove duplicated #include's
- From: Huang Weiyi <weiyi.huang@xxxxxxxxx>
- omap3evm mmc problem
- From: dfoley <dfoley@xxxxxxxxx>
- Re: Things to do after 2.6.29 gets released
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Things to do after 2.6.29 gets released
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [APPLIED] Overo broken after recent mainline merge
- From: David Brownell <david-b@xxxxxxxxxxx>
- [patch 2.6.28-rc8-omap git] sdp regulator init updates
- From: David Brownell <david-b@xxxxxxxxxxx>
- Things to do after 2.6.29 gets released
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP3 clock: Access only available clock bits
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP3 clock: Access only available clock bits
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: David Brownell <david-b@xxxxxxxxxxx>
- [APPLIED] Overo broken after recent mainline merge
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [patch 2.6.29-rc7-omap-git] Overo: MMC regulator configuration
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [patch/rfc 2.6.29-rc8-omap-git+] beagle power resource init
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] Group and resource assignments for TWL4030
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [patch] twl4030-regulator: expose VPLL2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: strange usb errors
- From: Frans Meulenbroeks <fransmeulenbroeks@xxxxxxxxx>
- strange usb errors
- From: Frans Meulenbroeks <fransmeulenbroeks@xxxxxxxxx>
- Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: mmc0 detection timing at kernel startup, linux-omap-2.6.27-omap1
- From: Ashwin Bihari <abihari@xxxxxxxxx>
- Re: mmc0 detection timing at kernel startup, linux-omap-2.6.27-omap1
- From: twebb <taliaferro62@xxxxxxxxx>
- Re: mmc0 detection timing at kernel startup, linux-omap-2.6.27-omap1
- From: Ashwin Bihari <abihari@xxxxxxxxx>
- [PATCH 03/03] OMAP3 clock: Fix locking in notifier register
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 02/03] OMAP3 clock: Update cpufreq driver
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 01/03] OMAP3 clock: Remove virt_vdd1/2_prcm_set
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 00/03] OMAP3 clock: Remove virtual clock nodes
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- Re: mmc0 detection timing at kernel startup, linux-omap-2.6.27-omap1
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- [PATCH] OMAP3: PM: Added resched check into idle calls
- From: Tero Kristo <tero.kristo@xxxxxxxxx>
- Bug fix: reschedule check for omap3 PM
- From: Tero Kristo <tero.kristo@xxxxxxxxx>
- Re: mmc0 detection timing at kernel startup, linux-omap-2.6.27-omap1
- From: Ashwin Bihari <abihari@xxxxxxxxx>
- [PATCH 09/09] OMAP clock: add pre/post/abort clk rate change notifiers
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 08/09] OMAP2/3 clock: implement clock notifier registration infrastructure
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 07/09] OMAP3 clock: Revert "OMAP2/3 clock: implement clock notifier infrastructure"
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 06/09] OMAP3 clock: Revert "OMAP clock: add notifier infrastructure"
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 05/09] OMAP3 clock: Revert "OMAP2/3 clock: store planned clock rates into temporary rate storage"
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 04/09] OMAP3 clock: Revert "OMAP2/3 clock: add clk post-rate-change notifiers"
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 03/09] OMAP3 clock: Revert "OMAP2/3 clock: add clock pre-rate-change notification"
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 02/09] OMAP3 clock: Revert "OMAP2/3 clock: add clock prepare-rate-change notifications"
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 01/09] OMAP3 clock: Revert "OMAP2/3 clock: add clock abort-rate-change notifications"
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 00/09] OMAP3 clock: Clock rate change notifiers
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- mmc0 detection timing at kernel startup, linux-omap-2.6.27-omap1
- From: twebb <taliaferro62@xxxxxxxxx>
- RE: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- [PATCH 07/07] OMAP3: SR: Remove redundunt defines
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 06/07] OMAP3: SR: Replace printk's with pr_* calls
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 05/07] OMAP3: SR: Reset voltage level on SR disable
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 04/07] OMAP3: SR: Disable SR autocomp only for CORE trans
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 03/07] OMAP3: SR: Use sysclk for SR CLKLENGTH calc
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- Re: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
- From: Alexey Klimov <klimov.linux@xxxxxxxxx>
- [PATCH 02/07] OMAP3: SR: Update VDD1/2 voltages at boot
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 01/07] OMAP3: SR: Fix init voltage on OPP change
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 00/07] OMAP3: SR: Fixes in Smartreflex driver
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- RE: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: "Gupta, Ramesh" <grgupta@xxxxxx>
- Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- RE: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- Re: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] OMAP3: PM: Invoke omap3_save_scratchpad_contents() only once at boot time
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- [PATCH 1/2] OMAP3: PM: Fix compile error with 'CONFIG_OMAP_PM_SRF=y'
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- [PATCH 0/2] OMAP3: PM: two fixes on PM branch
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- Re: [PATCH 0/3] V4L2 driver for OMAP2/3 with new CIDs.
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: Some possible missing v4l2_subdev IOCTLs.
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
- From: Hardik Shah <hardik.shah@xxxxxx>
- [PATCH 2/3] New V4L2 CIDs for OMAP class of Devices.
- From: Hardik Shah <hardik.shah@xxxxxx>
- [PATCH 1/3] Documentation for new V4L2 CIDs added.
- From: Hardik Shah <hardik.shah@xxxxxx>
- [PATCH 0/3] V4L2 driver for OMAP2/3 with new CIDs.
- From: "Shah, Hardik" <hardik.shah@xxxxxx>
- Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH] OMAP3 clock: Access only available clock bits
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Some possible missing v4l2_subdev IOCTLs.
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- RE: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- Re: PM branch rebased to 2.6.29
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH 1/1] Back-light class driver support for OMAP
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- RE: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- RE: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
- Re: [patch 2.6.29-rc8 regulator-next] regulator: init fixes (v4)
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- Re: [patch] twl4030-regulator: expose VPLL2
- From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
- Re: [APPLIED] [PATCH omap-fixes v2] OMAP2/3: GPIO: do not attempt to wake-enable
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [APPLIED] [PATCH omap-fixes v2] OMAP2/3: GPIO: do not attempt to wake-enable
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [APPLIED] [PATCH omap-fixes v2] OMAP2/3: GPIO: do not attempt to wake-enable
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [patch 2.6.29-rc8 regulator-next] regulator: init fixes (v4)
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- Re: [APPLIED] [PATCH omap-fixes v2] OMAP2/3: GPIO: do not attempt to wake-enable
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [APPLIED] [PATCH omap-fixes v2] OMAP2/3: GPIO: do not attempt to wake-enable
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- AW: CAM / V4L2: OMAP3 camera issues
- From: Opel Fahrer <opelfahrer79@xxxxxxxx>
- Re: [PATCH 00/86] OMAP2/3: clock sync with linux-omap
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 02/12] ARM: OMAP3: Store reboot mode in scratchpad on OMAP34xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: CAM / V4L2: OMAP3 camera issues
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- CAM / V4L2: OMAP3 camera issues
- From: Opel Fahrer <opelfahrer79@xxxxxxxx>
- Re: [PATCHv2] OMAP: McBSP: Do not enable or disable clocks on failed path
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- RE: [PATCH 1/1] DSPBRIDGE Fix flush_workque
- From: "Menon, Nishanth" <nm@xxxxxx>
- RE: [PATCH 1/1] DSPBRIDGE: Set __GFP_RECLAIMABLE for reloading bridge module
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: [PATCHv2] OMAP: McBSP: Always maintain McBSP fclk while active
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- [PATCH 2/2 (V3)] OMAP3EVM Multi-Media Daughter Card Support
- [PATCH 1/2 (V3)] OMAP3 ISP-Camera: Added BT656 support ontop of Sakari's repository
- BT656 Support and MMDC support on top of OMAP3EVM
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: Declare Headset as Mic and Headphone widgets for SDP3430
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- Re: [PATCH 3/7] ARM: OMAP: Add command line option for I2C bus speed
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- RE: [PATCH 00/05] OMAP3: SR: Fixes in Smartreflex driver
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 1/1] DSPBRIDGE: Set __GFP_RECLAIMABLE for reloading bridge module
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- RE: dma_alloc_coherent fragmentation
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: [PATCH 00/86] OMAP2/3: clock sync with linux-omap
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH B 2/3] tidspbridge: cleanup and remove HW_MMU_TLBFlushAll
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: dma_alloc_coherent fragmentation
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH] ASoC: Declare Headset as Mic and Headphone widgets for SDP3430
- From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
- [PATCH 1/1] DSPBRIDGE Fix flush_workque
- From: "Gupta, Ramesh" <grgupta@xxxxxx>
- [PATCH] OMAP3: PM: Add the wakeup source driver, v2
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: [PATCH 1/1] OMAP3: PM: Add the wakeup source driver
- From: Kim Kyuwon <chammoru@xxxxxxxxx>
- Re: [PATCH 02/12] ARM: OMAP3: Store reboot mode in scratchpad on OMAP34xx
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [APPLIED] [PATCH omap-fixes v2] OMAP2/3: GPIO: do not attempt to wake-enable
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2: possible division by 0
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH] ARM: OMAP2: possible division by 0
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [patch 2.6.29-rc8 regulator-next] regulator: init fixes (v4)
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [patch 2.6.29-rc8 regulator-next] regulator: init fixes (v4)
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [patch 2.6.29-rc8 regulator-next] regulator: init fixes (v4)
- From: Mark Brown <broonie@xxxxxxxxxxxxx>
- Re: [PATCH 02/12] ARM: OMAP3: Store reboot mode in scratchpad on OMAP34xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 02/12] ARM: OMAP3: Store reboot mode in scratchpad on OMAP34xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: dma_alloc_coherent fragmentation
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: TI OMAP3503 GPMC and SDMA multiplexing modes
- From: Elvis Dowson <elvis.dowson@xxxxxxx>
- Re: new PM branch available
- From: Nicholas Chen <nchen@xxxxxxxxxx>
- Re: [PATCH 3/7] ARM: OMAP: Add command line option for I2C bus speed
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 02/12] ARM: OMAP3: Store reboot mode in scratchpad on OMAP34xx
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [patch 2.6.29-rc8 regulator-next] regulator: init fixes (v4)
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: dma_alloc_coherent fragmentation
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: new PM branch available
- From: Nicholas Chen <nchen@xxxxxxxxxx>
- MMC: driver fails to recognize insert-remove SD card after data transfer error 84
- From: Ishaq Khan <ishaq.groups@xxxxxxxxx>
- Re: new PM branch available
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 02/12] ARM: OMAP3: Store reboot mode in scratchpad on OMAP34xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/05] OMAP3: SR: Fixes in Smartreflex driver
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 03/05] OMAP3: SR: Use sysclk for SR CLKLENGTH calc
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH A 00/15] tidspbridge: general cleanups
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- [PATCH 1/1] Back-light class driver support for OMAP
- RE: [PATCH B 1/3] tidspbridge: don't flood the mailbox on MemUnMap
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH A 00/15] tidspbridge: general cleanups
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [PATCH B 1/3] tidspbridge: don't flood the mailbox on MemUnMap
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- RE: [PATCH B 1/3] tidspbridge: don't flood the mailbox on MemUnMap
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- dma_alloc_coherent fragmentation
- From: "Kamat, Nishant" <nskamat@xxxxxx>
- RE: [PATCH A 00/15] tidspbridge: general cleanups
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- [PATCHv2] OMAP: McBSP: Do not enable or disable clocks on failed path
- From: ext-eero.nurkkala@xxxxxxxxx
- [PATCHv2] OMAP: McBSP: Always maintain McBSP fclk while active
- From: ext-eero.nurkkala@xxxxxxxxx
- [PATCH 05/05] OMAP3: SR: Reset voltage level on SR disable
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 04/05] OMAP3: SR: Disable SR autocomp only for CORE trans
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 03/05] OMAP3: SR: Use sysclk for SR CLKLENGTH calc
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 02/05] OMAP3: SR: Update VDD1/2 voltages at boot
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 01/05] OMAP3: SR: Fix init voltage on OPP change
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH 00/05] OMAP3: SR: Fixes in Smartreflex driver
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- Re: PM branch rebased to 2.6.29
- From: Artem Bityutskiy <dedekind@xxxxxxxxx>
- Re: [PATCH A 09/15] tidspbridge: cleanup and remove HW_MBOX_IsFull
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [PATCH] tidspbridge: remove revision history
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- RE: [PATCH] tidspbridge: remove revision history
- From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
- RE: [PATCH] tidspbridge: remove revision history
- From: "Menon, Nishanth" <nm@xxxxxx>
- RE: [PATCH] tidspbridge: remove revision history
- From: "Gupta, Ramesh" <grgupta@xxxxxx>
- Re: [PATCH] tidspbridge: remove revision history
- From: Trilok Soni <soni.trilok@xxxxxxxxx>
- Re: [PATCH] tidspbridge: remove revision history
- From: Trilok Soni <soni.trilok@xxxxxxxxx>
- PM branch rebased to 2.6.29
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] tidspbridge: remove revision history
- From: David Brownell <david-b@xxxxxxxxxxx>
- [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- [PATCH B 2/3] tidspbridge: cleanup and remove HW_MMU_TLBFlushAll
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- [PATCH B 1/3] tidspbridge: don't flood the mailbox on MemUnMap
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- [PATCH B 0/3] tidspbridge: don't flood the mailbox
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- [PATCH A 15/15] tidspbridge: print an error when timing out
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- [PATCH A 14/15] tidspbridge: remove wIntrVal2Dsp
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]