Nicholas Chen <nchen@xxxxxxxxxx> writes: > I recently checked out the latest PM branch from your git repository > and put it on the Beagleboard (B5). I have been largely able to > reproduce the results others have reported on this PM thread, ...not sure what "this PM thread" you are referring to? > but I believe my CORE and PER powerdomains are not hitting RET or > OFF. > I think this based on the following: > after I > echo 1 > enable_off_mode > echo 1 > sleep_while_idle > echo mem > state CORE and PER are still on because UART clocks are not being cut in idle: # echo 1 > /sys/power/clocks_off_when_idle And see if that works. Also at least on my Beagle, I am not able to resume from full-chip OFF, so for starters I suggest just testing retention: echo 0 > /sys/power/enable_off_mode > Suspending starts but upon resume I see the following: > ... > Powerdomain (core_pwrdm) didn't enter target state 0 > Powerdomain (per_pwrdm) didn't enter target state 0 > Could not enter target state in pm_suspend > > looking at debug/pm_debug/count/ > I see that only the core_pwrdm and per_pwrdm have 0's next to OFF: and > RET: > > Based on the thread, the resolution seems to be to disable USB and > upgrade u-boot. I think I have done both. My u-boot is 2009.03-rc2 > from Steve Sakoman's tree, and I have disabled USB support in my > Kernel build. Is there something that I am overlooking? Also, I'm > curious if the two powerdomains linked (i.e. I need to fix PER before > CORE will shut off or vice versa). For your problem, they're linked in that they both contain a UART block. UART1,2 are in CORE and UART3 is in PER. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
