The ldp board was left behind when other boards got updated. The ldp info was copied from the beagleboard board file and s/beagle/ldp/g
Signed-off-by: Koen Kooi <koen@xxxxxxxxxxxxxxx>
---
arch/arm/mach-omap2/board-ldp.c | 55 +++++++++++++++++++++++++++++++++++++++
1 files changed, 55 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 30926b0..faf62f8 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <mach/hardware.h>
@@ -450,7 +451,17 @@ static struct twl4030_script *twl4030_scripts[] __initdata = {
&wrst_script,
};
+static const struct twl4030_resconfig ldp_resconfig[] = {
+ /* disable regulators that u-boot left enabled; the
+ * devices' drivers should be managing these.
+ */
+ { .resource = RES_VMMC1, },
+ { .resource = RES_VSIM, },
+ { 0, },
+};
+
static struct twl4030_power_data sdp3430_t2scripts_data __initdata = {
+ .resource_config = ldp_resconfig,
.scripts = twl4030_scripts,
.size = ARRAY_SIZE(twl4030_scripts),
};
@@ -474,6 +485,44 @@ static struct twl4030_madc_platform_data ldp_madc_data = {
.irq_line = 1,
};
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply ldp_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ldp_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data ldp_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ldp_vsim_supply,
+};
+
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
@@ -483,6 +532,8 @@ static struct twl4030_platform_data ldp_twldata = {
.madc = &ldp_madc_data,
.usb = &ldp_usb_data,
.power = &sdp3430_t2scripts_data,
+ .vmmc1 = &ldp_vmmc1,
+ .vsim = &ldp_vsim,
.gpio = &ldp_gpio_data,
.keypad = &ldp_kp_twl4030_data,
};
@@ -530,6 +581,10 @@ static void __init omap_ldp_init(void)
omap_serial_init();
usb_musb_init();
twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ ldp_vmmc1_supply.dev = mmc[0].dev;
+ ldp_vsim_supply.dev = mmc[0].dev;
+
}
static void __init omap_ldp_map_io(void)
--
1.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
