> -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx > [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Kevin Hilman > Sent: Thursday, March 26, 2009 4:26 AM > To: linux-omap@xxxxxxxxxxxxxxx > Subject: PM branch rebased to 2.6.29... for real this time > > Hello, > > The previous rebase was actually to 2.6.29-rc8. Now that 2.6.29 is > out, I've rebased the PM brach onto linux-omap HEAD just after the > 2.6.29 merge. > > Minimal retention and off-mode on Beagle and RX51. Another problem that I found on OMAP3EVM: When I compiled in CPUidle and CPUfreq (over omap3_evm_defconfig), the kernel did not boot-up. The last few statements are: <3>clock: dpll5_ck failed transition to 'locked' clock: dpll5_ck failed transition to 'locked' <6>Disabling unused clock "dpll4_m6x2_ck" Disabling unused clock "dpll4_m6x2_ck" <6>Disabling unused clock "dpll3_m3x2_ck" Disabling unused clock "dpll3_m3x2_ck" <6>Disabling unused clock "sys_clkout1" Disabling unused clock "sys_clkout1" The PC is at the WFI statement. Tried other combinations as well: 1) only CPUidle enabled - okay. 2) only CPUfreq enabled - not okay. Best regards, Sanjeev > > Kevin > -- > To unsubscribe from this list: send the line "unsubscribe > linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html