> -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of > Gadiyar, Anand > Sent: Wednesday, April 01, 2009 1:55 PM > To: Russell King - ARM Linux > Cc: Tony Lindgren; linux-arm-kernel@xxxxxxxxxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx > Subject: RE: [PATCH 3/4] ARM: OMAP3: Add support for 3430 SDP, v3 > > On Wed, Apr 01, 2009 at 12:18 AM, Russell King - ARM Linux wrote: > > On Tue, Mar 31, 2009 at 05:12:18PM +0530, Gadiyar, Anand wrote: > > > I could not run the 3430 SDP defconfig from mainline. The image hangs at > > > "Starting kernel ...". Enabling CONFIG_DEBUG_LL does not help. > > > > Did you add the necessary patch to kernel/printk.c ? > > > > Silly me, I had not done this (despite having read this so many times on this list). > > Here's what I get now after adding the patch. > > - Anand > > Uncompressing > Linux................................................................................................ > .................... done, booting the kernel. > <5>Linux version 2.6.29-06608-g15f7176-dirty (a0393673@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.2.1 > (CodeSourcery Sourcery G++ Lite 2007q3-51)) #4 Wed Apr 1 13:26:59 IST 2009 > CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f > CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache > Machine: OMAP3430 3430SDP board > Memory policy: ECC disabled, Data cache writeback > <7>On node 0 totalpages: 32768 > <7>free_area_init_node: node 0, pgdat c038c8a4, node_mem_map c03a6000 > <7> Normal zone: 256 pages used for memmap > <7> Normal zone: 0 pages reserved > <7> Normal zone: 32512 pages, LIFO batch:7 > <6>OMAP3430 ES3.0 > <6>SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 > <5>Kernel command line: mem=128M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw > nfsroot=172.24.162.66:/vol/vol2/swcoe_omapsw_linux1/anand/target,nolock,tcp > ip=172.24.190.229:172.24.162.66:172.24.188.1:255.255.252.0:myomap::off > <6>NR_IRQS:402 > <6>Clocking rate (Crystal/DPLL/ARM core): 26.0/332/500 MHz > <6>GPMC revision 5.0 > <6>IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts > <6>Total of 96 interrupts on 1 active controller > <6>OMAP34xx GPIO hardware version 2.5 > PID hash table entries: 512 (order: 9, 2048 bytes) > Console: colour dummy device 80x30 > <6>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > <6>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > <6>Memory: 128MB = 128MB total > <5>Memory: 126064KB available (3188K code, 289K data, 112K init, 0K highmem) > <6>Calibrating delay loop... > Anand, It looks like the timers are not configured properly or the timer selection has gone wrong. Can you just compare your previous working defconfig with this and correct the GPTIMER selection? Regards, Khasim -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
