From: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Hook up VPLL2 regulator on 3430 SDP. Link that and VDAC to the
framebuffer device, supporting eventual conversion to use the
regulator framework.
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
---
Try also to merge this into the mainline queue ...
arch/arm/mach-omap2/board-3430sdp.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -189,6 +189,8 @@ static int ads7846_vaux_control(int vaux
{
int ret = 0;
+ /* FIXME use regulator calls */
+
#ifdef CONFIG_TWL4030_CORE
/* check for return value of ldo_use: if success it returns 0 */
if (vaux_cntrl == VAUX_ENABLE) {
@@ -245,6 +247,16 @@ static struct platform_device sdp3430_lc
.id = -1,
};
+static struct regulator_consumer_supply sdp3430_vdac_supply = {
+ .supply = "vdac",
+ .dev = &sdp3430_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply sdp3430_vdvi_supply = {
+ .supply = "vdvi",
+ .dev = &sdp3430_lcd_device.dev,
+};
+
static struct platform_device *sdp3430_devices[] __initdata = {
&sdp3430_smc91x_device,
&sdp3430_lcd_device,
@@ -587,6 +599,23 @@ static struct regulator_init_data sdp343
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data sdp3430_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vdvi_supply,
};
static struct twl4030_platform_data sdp3430_twldata = {
@@ -609,6 +638,7 @@ static struct twl4030_platform_data sdp3
.vmmc2 = &sdp3430_vmmc2,
.vsim = &sdp3430_vsim,
.vdac = &sdp3430_vdac,
+ .vpll2 = &sdp3430_vpll2,
};
static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
