> -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of Woodruff, Richard > Sent: Thursday, April 09, 2009 8:00 AM > > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > > owner@xxxxxxxxxxxxxxx] On Behalf Of Jarkko Nikula > > Sent: Thursday, April 09, 2009 2:04 AM > > > > just messing around with tony's master branch on SDP3430, just did a > > > defconfig and a build with 2007q3-51 codesourcery compiler, I see it > > > hang around: > > > > > Kernels built with this compiler stuck into delay loop calibration. > > No idea why, but 2008q3-66 was working for me. Using the following: arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2008q3-72) 4.3.2 I am past the lockup on calibration, but it now gets stuck as follows: NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. Disabling unused clock "gpt2_ick" Disabling unused clock "gpt2_fck" Disabling unused clock "wdt2_ick" Disabling unused clock "wdt2_fck" Disabling unused clock "dpll4_m6x2_ck" Disabling unused clock "dpll4_m5x2_ck" Disabling unused clock "dpll3_m3x2_ck" Disabling unused clock "sys_clkout1" variant c rev 1 implementor 41 architecture 3 part 30 variant c rev 1 regulator_init_complete: incomplete constraints, leaving VAUX3 on > > I wonder if the timer stopped ticking. If you connect with emulator take > a look at GPT1 registers and see if time base is moving. > > Another quick test is to shut off tickles, nohz=off. nohz=off did not work with either 2007q3 or 2008q3.. have'nt looked at the GPT regs though.. Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
