> -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx > [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Amit Kucheria > Sent: Monday, April 20, 2009 6:20 PM > To: linux-omap@xxxxxxxxxxxxxxx > Subject: [PATCH] twl4030: Add some error checking to twl4030 init > > Check for return values of i2c read/write operations and size > of scripts being > uploaded to TWL4030 > > Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx> [sp] You may want to fix the leading whitespaces in some places. see few instanes below. Otherwise, looks pretty straight. > --- > drivers/mfd/twl4030-core.c | 2 +- > drivers/mfd/twl4030-power.c | 52 > +++++++++++++++++++++++++++++++----------- > 2 files changed, 39 insertions(+), 15 deletions(-) > > diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c > index 769b34b..067b02e 100644 > --- a/drivers/mfd/twl4030-core.c > +++ b/drivers/mfd/twl4030-core.c > @@ -358,7 +358,7 @@ EXPORT_SYMBOL(twl4030_i2c_read); > int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg) > { > > - /* 2 bytes offset 1 contains the data offset 0 is used > by i2c_write */ > + /* 2 bytes: offset 1 contains the data, offset 0 is > used by i2c_write */ > u8 temp_buffer[2] = { 0 }; > /* offset 1 contains the data */ > temp_buffer[1] = value; > diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c > index 9dc493b..8f5d149 100644 > --- a/drivers/mfd/twl4030-power.c > +++ b/drivers/mfd/twl4030-power.c > @@ -257,36 +257,40 @@ static int __init > config_warmreset_sequence(u8 address) > return err; > } > > -void twl4030_configure_resource(struct twl4030_resconfig *rconfig) > +static int __init twl4030_configure_resource(struct > twl4030_resconfig *rconfig) > { > int rconfig_addr; > + int err; > u8 type; > > if (rconfig->resource > NUM_OF_RESOURCES) { > printk(KERN_ERR > "TWL4030 Resource %d does not exist\n", > rconfig->resource); > - return; > + return -EINVAL; > } > > rconfig_addr = res_config_addrs[rconfig->resource]; > > /* Set resource group */ > - > if (rconfig->devgroup >= 0) > - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > rconfig->devgroup << 5, > rconfig_addr + DEVGROUP_OFFSET); > + if (err < 0) { > + printk(KERN_ERR > + "TWL4030 failed to program devgroup"); [sp] ...here... > + return err; > + } > > /* Set resource types */ > - > - if (twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, > - &type, > - rconfig_addr + > TYPE_OFFSET) < 0) { > + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, > + rconfig_addr + TYPE_OFFSET); > + if (err < 0) { > printk(KERN_ERR > - "TWL4030 Resource %d type could not read\n", > - rconfig->resource); > - return; > + "TWL4030 Resource %d type could not be read\n", > + rconfig->resource); [sp] ...here... > + return err; > } > > if (rconfig->type >= 0) { > @@ -299,8 +303,15 @@ void twl4030_configure_resource(struct > twl4030_resconfig *rconfig) > type |= rconfig->type2 << 3; > } > > - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > type, rconfig_addr + TYPE_OFFSET); > + if (err < 0) { > + printk(KERN_ERR > + "TWL4030 failed to program resource type"); [sp] ...here... > + return err; > + } > + > + return 0; > > } > > @@ -309,6 +320,12 @@ static int __init > load_triton_script(struct twl4030_script *tscript) > u8 address = triton_next_free_address; > int err; > > + /* Make sure the script isn't going beyond last valid address */ > + if ((address + tscript->size) > (END_OF_SCRIPT-1)) { > + printk(KERN_ERR "TWL4030 script too big error\n"); > + return -EINVAL; > + } > + > err = twl4030_write_script(address, tscript->script, > tscript->size); > if (err) > return err; > @@ -346,15 +363,22 @@ void __init twl4030_power_init(struct > twl4030_power_data *triton2_scripts) > > for (i = 0; i < triton2_scripts->size; i++) { > err = load_triton_script(triton2_scripts->scripts[i]); > - if (err) > + if (err < 0) { > + printk(KERN_ERR "TWL4030 failed to load > scripts"); > break; > + } > } > > resconfig = triton2_scripts->resource_config; > if (resconfig) { > while (resconfig->resource) { > - twl4030_configure_resource(resconfig); > + err = twl4030_configure_resource(resconfig); > resconfig++; > + if (err < 0) { > + printk(KERN_ERR > + "TWL4030 failed to [sp] ...here... > configure resource"); > + break; > + } > } > } > > -- > 1.5.6.3 > > -- > To unsubscribe from this list: send the line "unsubscribe > linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
