Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH v3 0/4] ARM: dts: Add USB host support for Panda and Beagle-xm
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 04/10] OMAPDSS: DSI: use platform_driver_register()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 09/10] OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 10/10] OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 07/10] OMAPDSS: DPI: Add error handling for dpi_probe_pdata
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 08/10] OMAPDSS: HDMI: use platform_driver_register()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 06/10] OMAPDSS: DPI: use platform_driver_register()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 05/10] OMAPDSS: DSI: Add error handling for dsi_probe_pdata
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 03/10] OMAPFB: defer probe if no displays
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 02/10] OMAPFB: use module_platform_driver()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 01/10] OMAPDSS: Makefile: move omapfb after panels
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 00/10] OMAPDSS: Basic deferred probe support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: Section mismatch warning with linux next in usbhs_init_phys()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 5/8] MFD: ti_am335x_tscadc: Add DT support
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• [PATCH v6 5/9] ARM: OMAP: USB: Add phy binding information
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 8/9] usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 3/9] usb: phy: twl4030: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 9/9] usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 6/9] ARM: dts: omap: update usb_otg_hs data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 0/9] Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 2/9] usb: phy: omap-usb2: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 1/9] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 4/9] usb: phy: twl4030: twl4030 shouldn't be subsys_initcall
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 7/9] usb: musb: omap2430: use the new generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• v3.9.0-rc8 : oops in tick_do_update_jiffies64+0xbc/0x110
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [meta-ti] Full nohz on TCI6638k2k (KeyStone II)
  • From: Mats Liljegren <liljegren.mats2@xxxxxxxxx>
• Re: [GIT PULL] mailbox driver framework for v3.10 merge window
  • From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
• Re: [GIT PULL] musb regression on omap4 for v3.9
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCHv5 1/2] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH 1/3] arm: omap2+: serial: remove no_console_suspend support
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv5 0/3] Omap serial cleanup
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 2/3] arm: dts: am33xx: Remove "ti,no_idle_on_suspend" property.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 3/3] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv5 0/2] Serial fixes
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv5 0/3] Serial fixes
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv5 0/3] Serial fixes
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv5 1/2] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv5 2/2] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv4 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv4 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v2 0/6] ARM; OMAP2+: hwmod and SERIAL: Remove sysc handling from driver
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v2 4/6] SERIAL: OMAP: Remove the slave idle handling from the driver
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: OMAP4460: Fix CPU OPP voltages
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] ARM: dts: OMAP36xx/OMAP4460 Fix CPU OPP voltages
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/2] ARM: dts: OMAP36xx: Fix CPU OPP voltages
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/3] WLAN support for omap4 when booted with devicetree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: Add muxing for wl12xx on the SDIO bus for pandaboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] gpio/omap: implement irq mask/disable with proper semantic.
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [meta-ti] Full nohz on TCI6638k2k (KeyStone II)
  • From: William Mills <wmills@xxxxxx>
• Re: [net-next PATCH 1/1] drivers: net: cpsw: fix kernel warn on cpsw irq enable
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: Add muxing for wl12xx on the SDIO bus for pandaboard
  • From: Luciano Coelho <coelho@xxxxxx>
• BUG: Unable to handle kernel NULL pointer dereference (cpsw driver)
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• [PATCHv4 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv4 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv4 4/5] arm: dts: am33xx: Remove "ti,no_idle_on_suspend" property.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv4 3/5] arm: omap2+: serial: remove no_console_suspend support
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv4 0/5] Serial Omap fixes and cleanups
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv4 1/5] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [net-next PATCH 1/1] drivers: net: cpsw: fix kernel warn on cpsw irq enable
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [net-next PATCH 1/1] drivers: net: cpsw: fix kernel warn on cpsw irq enable
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree
  • From: Luciano Coelho <coelho@xxxxxx>
• [PATCH v2 4/6] SERIAL: OMAP: Remove the slave idle handling from the driver
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 5/6] ARM: OMAP2+: serial: Remove the un-used slave idle hooks
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 0/6] ARM; OMAP2+: hwmod and SERIAL: Remove sysc handling from driver
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 6/6] ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 1/6] ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc()
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 3/6] ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 2/6] ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH] ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH v2] gpio/omap: implement irq mask/disable with proper semantic.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: hwmod: Cleanup sidle/mstandby programming
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Full nohz on TCI6638k2k (KeyStone II)
  • From: Mats Liljegren <liljegren.mats2@xxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Fix the DT pbias workaround for MMC controllers 2 to 5
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH 3/3] ARM: dts: Add muxing for wl12xx on the SDIO bus for blaze
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH 0/3] WLAN support for omap4 when booted with devicetree
  • From: Luciano Coelho <coelho@xxxxxx>
• [PATCH] usb: musb: omap2430: add missing platform_device_put() on error in omap2430_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH 3/3] ARM: dts: Add muxing for wl12xx on the SDIO bus for blaze
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] ARM: dts: Add muxing for wl12xx on the SDIO bus for pandaboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] ARM: OMAP2+: Legacy support for wl12xx when booted with devicetree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] WLAN support for omap4 when booted with devicetree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] mmc: omap_hsmmc: Fix the DT pbias workaround for MMC controllers 2 to 5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] gpio/omap: implement irq mask/disable with proper semantic.
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH v3] gpio/omap: implement irq mask/disable with proper semantic.
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCHv3 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [net-next PATCH 1/3] drivers: of: add phy fixup support in DT
  • From: Ben Hutchings <bhutchings@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] ARM: dts: Add USB host support for Panda and Beagle-xm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [net-next PATCH 1/3] drivers: of: add phy fixup support in DT
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Felipe Balbi <balbi@xxxxxx>
• [RESEND PATCH] OMAPDSS: gracefully disable overlay at error
  • From: Sergey Kibrik <sergiikibrik@xxxxxx>
• Re: [net-next PATCH 1/3] drivers: of: add phy fixup support in DT
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv3 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv3 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv3 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v2 1/2] genirq: add function to get IRQ edge/level flags
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCHv3 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] staging: ti-soc-thermal: remove external heat while extrapolating hotspot
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCH 1/2] staging: ti-soc-thermal: update DT reference for OMAP5430
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCH 0/2] staging: ti-soc-thermal: couple of fixes
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: [GIT PULL] omap dss board clean-up for v3.10 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• [PATCHv3 3/5] arm: omap2+: serial: remove no_console_suspend support
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv3 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv3 1/5] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv3 0/5] Serial Omap fixes and cleanups
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv3 4/5] arm: dts: am33xx: Remove "ti,no_idle_on_suspend" property.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv3 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH v3 01/11] usb: phy: Add APIs for runtime power management
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH] RX-51: Fix probe order of SPI devices
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [net-next PATCH 0/3] Adding phy register fixup in DT
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [GIT PULL] omap dss board clean-up for v3.10 merge window
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Central Linux ARM wiki
  • From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] gpio/omap: implement irq mask/disable with proper semantic.
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] musb regression on omap4 for v3.9
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: remove unused variable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: remove unused variable
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] OMAP PM cleanups for v3.10
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] remove vlan tags in CPSW dual emac mode
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH v3 01/11] usb: phy: Add APIs for runtime power management
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 01/11] usb: phy: Add APIs for runtime power management
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [GIT PULL] OMAP PM cleanups for v3.10
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 0/2] OMAP: fix boot sequence
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP: fix boot sequence
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] remove vlan tags in CPSW dual emac mode
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap dss board clean-up for v3.10 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 01/11] usb: phy: Add APIs for runtime power management
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] remove vlan tags in CPSW dual emac mode
  • From: Markus Brunner <systemprogrammierung.brunner@xxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 0/2] OMAP: fix boot sequence
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 1/2] i2c: omap: convert to module_platform_driver()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/2] mfd: twl-core: convert to module_i2c_driver()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3 01/11] usb: phy: Add APIs for runtime power management
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• [PATCH v2] ARM: OMAP2+: Allow NAND transfer mode to be specified in DT
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH v3 01/11] usb: phy: Add APIs for runtime power management
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCHv2 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [RFC/PATCHv2 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: MTD : cannot reserve enough PEBs for bad PEB handling [SOLVED]
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: hwmod: Cleanup sidle/mstandby programming
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [net-next PATCH 0/3] Adding phy register fixup in DT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC/PATCHv2 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RFC/PATCHv2 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv2 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv2 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH 0/3] Dual EMAC mode implementation of CPSW
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCHv2 4/5] arm: dts: am33xx: Remove "ti,no_idle_on_suspend" property.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv2 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [RFC/PATCHv2 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCHv2 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [net-next PATCH 0/3] Adding phy register fixup in DT
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 1/3] drivers: of: add phy fixup support in DT
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 2/3] ARM: dts: AM33XX: Add CPSW phy_id device tree data to am335x-evmsk
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 3/3] ARM: dts: AM33XX: add phy fixup for evm and evmsk boards
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] Dual EMAC mode implementation of CPSW
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [RFC PATCH 0/2] cpufreq/regulator: Limit minimum voltage only
  • From: Taras Kondratiuk <taras@xxxxxx>
• Re: [PATCHv2 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RFC/PATCHv2 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCHv2 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2 4/5] arm: dts: am33xx: Remove "ti,no_idle_on_suspend" property.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2 3/5] arm: omap2+: serial: remove no_console_suspend support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2 1/5] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCHv2 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 0/3] Dual EMAC mode implementation of CPSW
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• [RFC/PATCHv2 5/5] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv2 4/5] arm: dts: am33xx: Remove "ti,no_idle_on_suspend" property.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv2 0/5] Serial Omap fixes and cleanups
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv2 2/5] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv2 3/5] arm: omap2+: serial: remove no_console_suspend support
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv2 1/5] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [RFC PATCH 0/2] cpufreq/regulator: Limit minimum voltage only
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] OMAPDSS: DPI: add dependency to DSI
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] ARM: OMAP2+: omap-usb-host: clean up pin mux setup code
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: MTD : cannot reserve enough PEBs for bad PEB handling
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• MTD : cannot reserve enough PEBs for bad PEB handling
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3] gpio/omap: implement irq mask/disable with proper semantic.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3] gpio/omap: implement irq mask/disable with proper
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [GIT PULL] omap dss board clean-up for v3.10 merge window
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 0/4] ARM: dts: Add USB host support for Panda and Beagle-xm
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [RFC PATCH 0/2] cpufreq/regulator: Limit minimum voltage only
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [PATCH v3 1/6] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 4/6] arm: mach-omap2: remove "OMAP_DEVICE_NO_IDLE_ON_SUSPEND" check
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH v2] gpio/omap: implement irq mask/disable with proper semantic.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [RFC PATCH 0/2] cpufreq/regulator: Limit minimum voltage only
  • From: "Kondratiuk, Taras" <taras@xxxxxx>
• [PATCH] ARM: OMAP2+: Allow NAND transfer mode to be specified in DT
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [GIT PULL] omap dss board clean-up for v3.10 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] gpio/omap: implement irq_enable/disable using mask/unmask.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] gpio/omap: implement irq mask/disable with proper semantic.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] omap dss board clean-up for v3.10 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Multiple issues with omap4 panda es in linux next
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Multiple issues with omap4 panda es in linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: nand: reorganize gpmc timing values
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/4] ARM: dts: Add USB host support for Panda and Beagle-xm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-panda: Add USB Host support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] arm: mach-omap2: remove "OMAP_DEVICE_NO_IDLE_ON_SUSPEND" check
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 0/6] Serial Omap fixes and cleanups
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 4/6] arm: mach-omap2: remove "OMAP_DEVICE_NO_IDLE_ON_SUSPEND" check
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 0/6] Serial Omap fixes and cleanups
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] Generic PHY Framework
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH v3 1/4] ARM: dts: omap4-panda: Add USB Host support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 3/4] ARM: dts: omap3-beagle-xm: Add USB Host support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 2/4] ARM: dts: omap3-beagle: Make USB host pin naming consistent
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 4/4] ARM: dts: omap3-beagle-xm: Add USB host supprot for Rev. Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 0/4] ARM: dts: Add USB host support for Panda and Beagle-xm
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v3 1/6] drivers: phy: add generic PHY framework
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-panda: Add USB Host support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] retu-mfd: support also Tahvo
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 4/6] arm: mach-omap2: remove "OMAP_DEVICE_NO_IDLE_ON_SUSPEND" check
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 3/6] driver: serial: omap: add prepare/complete callback for "no_console_suspend" case
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-panda: Add USB Host support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ARM: dts: omap3: NAND support - how?
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 0/6] Serial Omap fixes and cleanups
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH 6/6] arm: mach-omap2: Remove "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH 6/6] arm: mach-omap2: Remove "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• ARM: dts: omap3: NAND support - how?
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] arm: mach-omap2: remove "OMAP_DEVICE_NO_IDLE_ON_SUSPEND" check
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 2/2] ARM: OMAP4+: Add a timer attribute for timers that can interrupt IPU
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 0/6] Serial Omap fixes and cleanups
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• RE: [PATCH 2/2] ARM: OMAP4+: Add a timer attribute for timers that can interrupt IPU
  • From: "Anna, Suman" <s-anna@xxxxxx>
• Re: [PATCH 6/6] arm: mach-omap2: Remove "no_console_suspend"
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 3/6] driver: serial: omap: add prepare/complete callback for "no_console_suspend" case
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH 6/6] arm: mach-omap2: Remove "no_console_suspend"
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 4/6] arm: mach-omap2: remove "OMAP_DEVICE_NO_IDLE_ON_SUSPEND" check
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 3/6] driver: serial: omap: add prepare/complete callback for "no_console_suspend" case
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 3/3] ARM: OMAP2+: Fix is_gpmc_muxed warning for H4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] ARM: OMAP2+: Fix unused variable warning for am3517 crane
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] few omap randconfig fixes for v3.10
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAPDSS: DPI: add dependency to DSI
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [RFC v1] regulator: core: introduce regulator chain locking scheme
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 0/3] Dual EMAC mode implementation of CPSW
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: [PATCH] OMAPDSS: DPI: add dependency to DSI
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 3/6] driver: serial: omap: add prepare/complete callback for "no_console_suspend" case
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH v2 0/6] ARM: OMAP3+: Introduce ABB driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/1] of/irq: store IRQ trigger/level in struct resource flags
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH 3/6] driver: serial: omap: add prepare/complete callback for "no_console_suspend" case
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH v3 01/11] usb: phy: Add APIs for runtime power management
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/2] ARM: dts: omap3-beagle-xm: Add USB Host support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 2/2] ARM: dts: omap3-beagle-xm: Add USB host supprot for Rev. Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH v2 0/6] ARM: OMAP3+: Introduce ABB driver
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: hwmod: Cleanup sidle/mstandby programming
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFT/PATCH 2/6] driver: serial: mpc52xx_uart: Remove "uart_console" defintion
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [RFT/PATCH 2/6] driver: serial: mpc52xx_uart: Remove "uart_console" defintion
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAPDSS: DPI: add dependency to DSI
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS
  • From: Vincent Stehlé <v-stehle@xxxxxx>
• Re: [PATCH] OMAPDSS: DPI: add dependency to DSI
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] OMAPDSS: DPI: add dependency to DSI
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 1/2] ARM: OMAP2+: only search for GPMC DT child nodes on probe
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH] OMAPDSS: DPI: add dependency to DSI
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [RFT/PATCH 2/6] driver: serial: mpc52xx_uart: Remove "uart_console" defintion
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• RE: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 3/6] driver: serial: omap: add prepare/complete callback for "no_console_suspend" case
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFT/PATCH 2/6] driver: serial: mpc52xx_uart: Remove "uart_console" defintion
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 00/33] OMAPDSS: platform_enable/disable callback removal from panel drivers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [GIT PULL] omap dss board clean-up for v3.10 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/33] OMAPDSS: platform_enable/disable callback removal from panel drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP4+: Add a timer attribute for timers that can interrupt IPU
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 2/2] ARM: OMAP4+: Add a timer attribute for timers that can interrupt IPU
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: OMAP5: add PWM capability to timer nodes missing it
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH 2/2] ARM: OMAP4+: Add a timer attribute for timers that can interrupt IPU
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 1/2] ARM: dts: OMAP5: add PWM capability to timer nodes missing it
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 0/2] OMAP gptimer capability changes
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 1/2] ARM: OMAP2+: only search for GPMC DT child nodes on probe
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH v2 1/2] ARM: OMAP2+: only search for GPMC DT child nodes on probe
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: control: add OMAP5 support for dsp boot programming
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH] ARM: dts: OMAP4+: remove multimedia carveouts
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 1/2] ARM: OMAP2+: only search for GPMC DT child nodes on probe
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH v2 2/2] ARM: OMAP2+: only WARN if a GPMC child probe function fail
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] ARM: OMAP2+: only search for GPMC DT child nodes on probe
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH] gpio/omap: ensure gpio context is initialised
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH 3/3] arm: add bandgap entry for OMAP4460 devices
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCH 2/3] arm: dts: add bandgap entry for OMAP443x devices
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] ARM: dts: omap4-panda: Add LED support into the panda DTS files
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] ARM: dts: omap4-panda: Add LED support into the panda DTS files
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH] Fix omap4 panda LED definitions
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] ARM: dts: omap4-panda: Add LED support into the panda DTS files
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: only search for GPMC DT child nodes on probe
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH v3 3/3] ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: only search for GPMC DT child nodes on probe
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH] ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-omap2-mcspi.c: Add dts for slave device configuration.
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
  • From: Lars Poeschel <poeschel@xxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH v2 2/2] USB: ehci-omap: Improve PHY error handling
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH v3 3/3] ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH 5/6] arm: dts: am33xx: Remove "ti,no_idle_on_suspend" property.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 3/6] driver: serial: omap: add prepare/complete callback for "no_console_suspend" case
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 0/6] Serial Omap fixes and cleanups
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 1/6] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 6/6] arm: mach-omap2: Remove "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 4/6] arm: mach-omap2: remove "OMAP_DEVICE_NO_IDLE_ON_SUSPEND" check
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [RFT/PATCH 2/6] driver: serial: mpc52xx_uart: Remove "uart_console" defintion
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH v3 3/3] ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
  • From: Lars Poeschel <poeschel@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 2/2] USB: ehci-omap: Improve PHY error handling
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/2] USB: ehci-omap: Improve PHY error handling
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: adding rpmsg.git to linux next
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [RFC PATCH v2 0/6] ARM: OMAP3+: Introduce ABB driver
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [RFC PATCH v2 0/6] ARM: OMAP3+: Introduce ABB driver
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [BUG] omap: mfd/regulator: twl/core: init order
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: adding rpmsg.git to linux next
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 2/2] USB: ehci-omap: Improve PHY error handling
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: ehci-omap: Don't select any PHY driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 0/6] ARM: OMAP3+: Introduce ABB driver
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• Re: [RFC PATCH v2 5/6] ARM: OMAP3+: ABB: introduce ABB driver
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• Re: [PATCH 0/3] Dual EMAC mode implementation of CPSW
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• Re: [PATCH v3 1/6] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] Documentation: dt: update properties in TI GPMC NAND example
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [BUG] omap: mfd/regulator: twl/core: init order
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2 1/2] RTC: rtc-twl: Fix rtc_reg_map initialization
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 2/2] RTC: rtc-twl: Cleanup with module_platform_driver() conversion
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] RTC: rtc-twl: Convert to module_platform_driver() and relocate reg_map init
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] RTC: rtc-twl: Convert to module_platform_driver() and relocate reg_map init
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [BUG] omap: mfd/regulator: twl/core: init order
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] RTC: rtc-twl: Convert to module_platform_driver() and relocate reg_map init
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 00/33] OMAPDSS: platform_enable/disable callback removal from panel drivers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: adding rpmsg.git to linux next
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] gpio/omap: free irq domain in probe() failure paths
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [RFC PATCH v2 0/6] ARM: OMAP3+: Introduce ABB driver
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/33] OMAPDSS: platform_enable/disable callback removal from panel drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH v3 1/6] drivers: phy: add generic PHY framework
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [net PATCH 1/1] drivers: net: ethernet: cpsw: get slave VLAN id from slave node instead of cpsw node
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 0/3] Dual EMAC mode implementation of CPSW
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• Re: [PATCH 0/3] Dual EMAC mode implementation of CPSW
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net PATCH 1/1] drivers: net: ethernet: cpsw: get slave VLAN id from slave node instead of cpsw node
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH 0/3] Dual EMAC mode implementation of CPSW
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• Re: [PATCH 0/3] Dual EMAC mode implementation of CPSW
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH 3/3] driver: net: ethernet: cpsw: dual emac interface implementation
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [RFC v1] regulator: core: introduce regulator chain locking scheme
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH V4 10/18] ARM: OMAP2+: Add function to read GPMC settings from device-tree
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [RFC PATCH v2 5/6] ARM: OMAP3+: ABB: introduce ABB driver
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [BUG] omap: mfd/regulator: twl/core: init order
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [RFC v1] regulator: core: introduce regulator chain locking scheme
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• Re: [PATCH] spi: omap2-mcspi: Fix transfers if DMADEVICES is not set
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC v1] regulator: core: introduce regulator chain locking scheme
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [RFC PATCH v2 5/6] ARM: OMAP3+: ABB: introduce ABB driver
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [RFC PATCH v2 6/6] ARM: OMAP3+: ABB: introduce debugfs entry
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [RFC PATCH v2 4/6] ARM: OMAP3+: ABB: add aliases for sysclk used in ABB driver
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [RFC PATCH v2 3/6] ARM: dts: OMAP5: add device tree for ABB
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [RFC PATCH v2 2/6] ARM: dts: OMAP4: add device tree for ABB
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [RFC PATCH v2 1/6] ARM: dts: OMAP36xx: add device tree for ABB
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [RFC PATCH v2 0/6] ARM: OMAP3+: Introduce ABB driver
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• Re: [PATCH V4 10/18] ARM: OMAP2+: Add function to read GPMC settings from device-tree
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [RFC v1 0/1] introduce regulator chain locking scheme
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [RFC v1] regulator: core: introduce regulator chain locking scheme
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] ARM: dts: omap3-beagle-xm: Add USB Host support for Rev Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v3 0/6] Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Latest randconfig build errors
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 1/6] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 0/6] Generic PHY Framework
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 1/2] USB: ehci-omap: Don't select any PHY driver
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/2] USB: ehci-omap: Improve PHY error handling
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [PATCH v3 1/6] drivers: phy: add generic PHY framework
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v3 0/6] Generic PHY Framework
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [BUG] omap: mfd/regulator: twl/core: init order
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [GIT PULL] omap display changes for 3.10
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [BUG] omap: mfd/regulator: twl/core: init order
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/5] capemgr: Beaglebone DT overlay based cape manager
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [BUG] omap: mfd/regulator: twl/core: init order
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3 0/6] Generic PHY Framework
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH 00/33] OMAPDSS: platform_enable/disable callback removal from panel drivers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] ARM: dts: omap4-panda: Add USB Host support
  • From: Roger Quadros <rogerq@xxxxxx>
• adding rpmsg.git to linux next
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: Latest randconfig build errors
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• OMAP baseline test results for v3.9-rc7
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/3] driver: net: ethernet: cpsw: dual emac interface implementation
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• Re: [PATCH 0/3] Dual EMAC mode implementation of CPSW
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• Re: Latest randconfig build errors
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: Latest randconfig build errors
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH] net: smsc911x: adopt pinctrl support
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• [BUG] omap: mfd/regulator: twl/core: init order
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH] omap: mux: add AM/DM37x gpios
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH] net: smsc911x: adopt pinctrl support
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Latest randconfig build errors
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH v2 1/2] genirq: add function to get IRQ edge/level flags
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] genirq: add function to get IRQ edge/level flags
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH] ARM: dts: Configure and fix the McSPI pins for 4430sdp
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] spi: omap2-mcspi: Fix transfers if DMADEVICES is not set
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH V4 0/6] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V4 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V4 2/6] ARM: dts: OMAP3: add clock nodes for CPU
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V4 3/6] ARM: dts: OMAP4: add clock nodes for CPU
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V4 5/6] ARM: OMAP2+: AM33XX: add lateinit hook for calling pm late init
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V4 4/6] ARM: dts: AM33XX: add clock nodes for CPU
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V4 6/6] ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/2] genirq: add function to get IRQ edge/level flags
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH 0/2] net: smsc911x: get IRQ flags from chip if not present in IORESOURCE_IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH 2/2] net: smsc911x: get IRQ flags from chip if not present in IORESOURCE_IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH 1/2] genirq: add function to get IRQ edge/level flags
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH v2 3/3] mmc: omap_hsmmc: add PSTATE to debugfs regs_show.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/3] mmc: omap_hsmmc: debugfs entries for GPIO mode.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/3] mmc: omap_hsmmc: Enable SDIO IRQ using a GPIO in idle mode.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/3] omap_hsmmc: SDIO IRQ on AM335x family
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
  • From: Jyri Sarha <oku@xxxxxx>
• Re: [PATCH] gpio/omap: implement irq_enable/disable using mask/unmask.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH] gpio/omap: implement irq_enable/disable using mask/unmask.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 0/3] Dual EMAC mode implementation of CPSW
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• [PATCH] gpio/omap: implement irq_enable/disable using mask/unmask.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] gpio/omap: implement irq_enable/disable using mask/unmask.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• RE: [PATCH] ARM: dts: omap2plus: remove interrupt-parent property
  • From: "Vishwanathrao Badarkhe, Manish" <manishv.b@xxxxxx>
• RE: [PATCH v2 11/11] ARM: OMAP2+: omap_hwmod: Don't call _init_mpu_rt_base if no sysc
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: How do you configure AM335x dts for dual ethernet ?
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Section mismatch warning with linux next in usbhs_init_phys()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 25/26] arm: Don't use create_proc_read_entry() [RFC]
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio/omap v2: map irq_enable/disable to mask/unmask.
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH 25/26] arm: Don't use create_proc_read_entry() [RFC]
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 25/26] arm: Don't use create_proc_read_entry() [RFC]
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: [GIT PULL 5/5] omap dt changes for v3.10 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• How do you configure AM335x dts for dual ethernet ?
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• Re: gpio/omap v2: map irq_enable/disable to mask/unmask.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 25/26] arm: Don't use create_proc_read_entry() [RFC]
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio/omap v2: map irq_enable/disable to mask/unmask.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 25/26] arm: Don't use create_proc_read_entry() [RFC]
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• gpio/omap v2: map irq_enable/disable to mask/unmask.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [GIT PULL 5/5] omap dt changes for v3.10 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/2] OMAPDSS: DPI: widen the pck search when using dss fck
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/2] OMAPDSS: fix dss_fck clock rate rounding
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460
  • From: Li Haifeng <omycle@xxxxxxxxx>
• Re: [PATCH v2 11/11] ARM: OMAP2+: omap_hwmod: Don't call _init_mpu_rt_base if no sysc
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 1/2] ARM: dts: OMAP4+: Add DMM bindings
  • From: Andy Gross <andy.gross@xxxxxx>
• [PATCH v2 0/2] ARM: dts: OMAP4+: Add dmm device bindings
  • From: Andy Gross <andy.gross@xxxxxx>
• [PATCH v2 2/2] ARM: OMAP2+: Enable DT usage during dmm create
  • From: Andy Gross <andy.gross@xxxxxx>
• Re: [PATCH 4/5] gpio/omap: force restore if context loss is not detectable
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock (fwd)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup
  • From: Paul Walmsley <paul@xxxxxxxxx>
• OMAP baseline test results for v3.9-rc6
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 4/5] gpio/omap: force restore if context loss is not detectable
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 1/5] gpio/omap: free irq domain in probe() failure paths
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 4/5] gpio/omap: force restore if context loss is not detectable
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2] ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock (fwd)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 4/5] gpio/omap: force restore if context loss is not detectable
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH v2] ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 4/5] gpio/omap: force restore if context loss is not detectable
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: optimise interrupt service routine
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/5] gpio/omap: remove extra context restores in *_runtime_resume()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/5] gpio/omap: free irq domain in probe() failure paths
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] OMAP PM cleanups for v3.10
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [RFC PATCH 3/3] ARM: OMAP2+: Add command line parameter for debugSS module control
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] RX-51: Fix probe order of SPI devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] mfd: twl4030-madc: Add support for raw value in twl4030_madc_conversion
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] RX-51: Fix probe order of SPI devices
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 1/2] mfd: twl4030-madc: Add support for raw value in twl4030_madc_conversion
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [GIT PULL] CPUidle: OMAP cleanups for v3.10
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• RE: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Kexec couldn't reboot capture kernel on pandaboard ES with OMAP4460
  • From: Li Haifeng <omycle@xxxxxxxxx>
• Re: [PATCH] omapdss: use devm_clk_get()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] omapdss: use devm_clk_get()
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH] omapdss: use devm_clk_get()
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH] omapdss: use devm_clk_get()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] omapdss: use devm_clk_get()
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH] omapdss: use devm_clk_get()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] OMAPDSS: nec-nl8048 panel: Use dev_pm_ops
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• RE: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [PATCH v3 2/4] ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH] dmaengine: omap-dma: Start DMA without delay for cyclic channels
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• RE: [RFC PATCH 3/3] ARM: OMAP2+: Add command line parameter for debugSS module control
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [GIT PULL] CPUidle: OMAP cleanups for v3.10
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH] cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [GIT PULL] CPUidle: OMAP cleanups for v3.10
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [GIT PULL] OMAP PM cleanups for v3.10
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH V3 1/2] ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [GIT PULL 2/5] omap pm clean-up for v3.10 merge window
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [GIT PULL 2/5] omap pm clean-up for v3.10 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• 4430sdp nfsroot broken with ff5c9059
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 2/5] omap pm clean-up for v3.10 merge window
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: HWMOD: make 'ocp2scp_usb_phy_phy_48m" as the main clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH V3 1/2] ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH V3 1/2] ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RFC PATCH v2 2/4] ARM: OMAP1: nokia770: enable Tahvo
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [RFC PATCH v2 3/4] USB: OMAP: add omap-otg
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [RFC PATCH v2 4/4] USB: OMAP: Tahvo USB transceiver driver
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [RFC PATCH v2 1/4] retu-mfd: support also Tahvo
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [RFC PATCH v2 0/4] USB: OMAP: Tahvo USB support for 770
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH V3 1/2] ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCHv3] driver: serial: prevent UART console idle on suspend while using "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>