Hi,
On Monday 15 April 2013 03:50 PM, Grant Likely wrote:
On Wed, 20 Mar 2013 14:41:59 +0530, Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
Added a generic PHY framework that provides a set of APIs for the PHY drivers
to create/destroy a PHY and APIs for the PHY users to obtain a reference to
the PHY with or without using phandle. To obtain a reference to the PHY
without using phandle, the platform specfic intialization code (say from board
file) should have already called phy_bind with the binding information. The
binding information consists of phy's device name, phy user device name and an
index. The index is used when the same phy user binds to mulitple phys.
This framework will be of use only to devices that uses external PHY (PHY
functionality is not embedded within the controller).
The intention of creating this framework is to bring the phy drivers spread
all over the Linux kernel to drivers/phy to increase code re-use and to
increase code maintainability.
Comments to make PHY as bus wasn't done because PHY devices can be part of
other bus and making a same device attached to multiple bus leads to bad
design.
Making omap-usb2 and twl4030 to use this framework is provided as a sample.
This patch series is developed on 3.9-rc3. Once the patch series gets finalised
I'll resend omap-usb2 and twl4030 part based on Felipe's tree.
[...]
drivers/Kconfig | 2 +
drivers/Makefile | 2 +
drivers/phy/Kconfig | 13 +
drivers/phy/Makefile | 5 +
drivers/phy/phy-core.c | 574 ++++++++++++++++++++
This looks to be very specific for USB PHYs. Are you intending it to be
used for other types of PHYs, like Ethernet PHYs? If not, then this
Not really. This can be used by USB, SATA and Sylwester was planning to
use it for video PHY's.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html