The following version 4 of the series arose from trying to use BeagleBoard-XM (OMAP3 variant) for doing CPU DVFS using cpufreq-cpu0. This series enables the generic cpufreq-cpu0 driver to be used in device tree enabled boot while maintaining support of the legacy omap-cpufreq driver when used in non device tree enabled boot. However, in order to enable complete SoC entitlement for OMAP platforms, with this series, key features are still pending on device tree adaptation for OMAP: A) clock framework data transition to DT - this should happen soon, so this series hacks the clock node for the time being as suggested in review of original series[1]. B) On processors that use voltage controller, voltage processor (VC/VP hardware loop using I2C_SR path) - we have started work on transitioning them to regulator framework driven by DT. C) Adaptive Body Bias and SmartReflex AVS conversion to DT. [2] Note: At this point in time, we do not have DT entries for clock on OMAP platforms. Common Clock Framework(CCF) could also control regulators[3]. Once these conversions are complete, there might be minimal cleanup work to switch to the new data structure changes. Key benefit of the series is to allow all relevant TI platforms now to use a single cpufreq driver and equivalent frameworks in addition be part of the transition to device tree. NOTE: As a result of this series: 1. omap-cpufreq will be used only in non device tree boot scenario. we should delete this driver once the 100% DT conversion is complete. 2. Generic cpufreq-cpu0 will be used only in device tree boot scenario. boot systems. Key changes in version 4 since version 3: - OMAP clock driver introduced as discussed in http://marc.info/?t=136370325600009&r=1&w=2 - cpufreq-cpu0 dummy device introduced in pm.c late_initcall: discussed in http://marc.info/?t=136450773400004&r=1&w=2 - updated test script (prints regulator voltage where available) - parts of the series probably belong to different maintainer: consolidated as a single series to aid review in-context. version 3 of the series: http://marc.info/?l=linux-pm&m=136450759315742&w=2 available at: http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.10/dts version 2 of the series: http://marc.info/?t=136371570200003&r=1&w=2 available at: https://github.com/nmenon/linux-2.6-playground/commits/push/cpufreq-cpu0-omap-all-v2 version 1 of the series: http://marc.info/?t=136329485400005&r=1&w=2 available at: https://github.com/nmenon/linux-2.6-playground/commits/push/cpufreq-cpu0-omap-all-v1 [1] Original discussion thread which triggered this series: http://marc.info/?l=linux-pm&m=136304313700602&w=2 https://patchwork.kernel.org/patch/2251841/ https://patchwork.kernel.org/patch/2251851/ [2] ABB RFC: http://marc.info/?l=linux-omap&m=136449099409794&w=2 [3] CCF DVFS patches: https://patchwork.kernel.org/patch/2195431/ https://patchwork.kernel.org/patch/2195421/ https://patchwork.kernel.org/patch/2195451/ https://patchwork.kernel.org/patch/2195441/ https://patchwork.kernel.org/patch/2195461/ Version 4 is now based on a few branches to prevent merge conflicts(v3.9-rc6): git://git.linaro.org/people/mturquette/linux.git clk-next 38e4aa0 clk: sunxi: Unify oscillator clock git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next 584fa10 Merge branch 'pm-runtime-next' git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.10/dts 1fac4ff ARM: dts: Add OMAP3430 (merged branch is called baseline-v4 on my tree) Version 4 is also available at: https://github.com/nmenon/linux-2.6-playground/commits/push/cpufreq-cpu0-omap-all-v4 git link: git://github.com/nmenon/linux-2.6-playground.git branch: cpufreq-cpu0-omap-all-v4 Test coverage: test script: http://pastebin.com/z4yqZrBg Platforms verified: beaglebone(rev A6a) - AM33xx compatible - http://pastebin.com/YnSNiTnx beagleboard (rev C1D) - OMAP3430 compatible - DT enabled boot: http://pastebin.com/eGaDD3B4 - No DT enabled boot: http://pastebin.com/5xqsNBA6 omap3-beagle-xm -OMAP3630 compatible - http://pastebin.com/FdrG4Rna Pandaboard -(OMAP4430 ES2.1) - http://pastebin.com/1jjSRKQh Pandaboard-ES -(OMAP4460 ES1.1) - http://pastebin.com/B5acTbch Nishanth Menon (6): clk: OMAP: introduce device tree binding to kernel clock data [Clk probably belongs to mike's tree?] ARM: dts: OMAP3: add clock nodes for CPU ARM: dts: OMAP4: add clock nodes for CPU ARM: dts: AM33XX: add clock nodes for CPU [The above probably belong to Benoit's tree] ARM: OMAP2+: AM33XX: add lateinit hook for calling pm late init ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot [The above probably belong to Kevin/Tony's tree] .../devicetree/bindings/clock/omap-clock.txt | 40 ++++++++ arch/arm/boot/dts/am33xx.dtsi | 7 ++ arch/arm/boot/dts/omap3.dtsi | 7 ++ arch/arm/boot/dts/omap4.dtsi | 7 ++ arch/arm/mach-omap2/board-generic.c | 1 + arch/arm/mach-omap2/cclock33xx_data.c | 1 - arch/arm/mach-omap2/common.h | 1 + arch/arm/mach-omap2/io.c | 6 ++ arch/arm/mach-omap2/pm.c | 11 ++- drivers/clk/Makefile | 1 + drivers/clk/omap/Makefile | 1 + drivers/clk/omap/clk.c | 96 ++++++++++++++++++++ 12 files changed, 175 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/omap-clock.txt create mode 100644 drivers/clk/omap/Makefile create mode 100644 drivers/clk/omap/clk.c Regards, Nishanth Menon -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
