On Thursday 25 April 2013 07:28 PM, Kevin Hilman wrote: > Tony Lindgren <tony@xxxxxxxxxxx> writes: > >> * Santosh Shilimkar <santosh.shilimkar@xxxxxx> [130419 10:56]: >>> On Friday 19 April 2013 11:14 PM, Tony Lindgren wrote: >>>> * Santosh Shilimkar <santosh.shilimkar@xxxxxx> [130419 10:43]: >>>>> On Friday 19 April 2013 10:43 PM, Tony Lindgren wrote: >>>>>> Hi all, >>>>>> >>>>>> Here's a list of breakage I've noticed so far while trying to >>>>>> use linux next on my pandaboard es. Probably similar issues exist >>>>>> on other boards as well. >>>>>> >>>>>> Ideally we would not have any breakage by the merge window, so >>>>>> let's try to get these fixed ASAP: >>>>>> >>>>>> 1. Serial console broken on panda es booting with DT >>>>>> >>>>>> The symptoms are dmesg output stopping after few lines >>>>>> and only continuing after pressing a key. Does not seem to >>>>>> happen on blaze with DT for some reason. And does not happen >>>>>> on panda es with legacy booting. >>>>>> >>>>> This one is known and reported on list along with fix patches and >>>>> later pull request [1]. >>>>> >>>>> Unfortunately with all the testing and everything and patches have >>>>> been on the list for quite some time, feedback on one of the patch >>>>> received was after pull request and then there was no further >>>>> clarification. That series address the same exact issue you have >>>>> mentioned above. >>>> >>>> OK thanks. I think Paul picked some of those and the plan was >>>> to update the branch? Which one(s) should go into v3.10 as fixes? >>>> >>> Main in that series was to handle driver sysc handling withing hwmod >>> layer and that is where the series got stuck [2]. Without that support >>> other patches won't fix the issue. >> >> OK it seems that that is still ongoing discussion. For v3.10 we should >> probably just disable PM for omap4 for DT booting so people can use >> it for DT related development. > > Disabling PM (and even avoiding WFI using 'nohlt') will not fix this > problem, since it's related to the idle-mode of the IP block itself. > > What fixes the problem is the series from Santosh for the SYSC removal. > > Santosh, it seems that series combined a fix for this problem with some > cleanup of the hwmod code that Paul had some concerns with. Is there > any chance you can split up that series into a fix targetted at the > DT-boot UART problem and a feature cleanup for hwmod? > > Then we hopefully get this fix into v3.10-rc and work on the hwmod > changes/cleanup for the following merge window. > That was just one patch which was added so that UART async wakeup works. Rajendra is cleaning up that patch and post an updated series which hopefully make the console issue go away. Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html