Hi all, Here's a list of breakage I've noticed so far while trying to use linux next on my pandaboard es. Probably similar issues exist on other boards as well. Ideally we would not have any breakage by the merge window, so let's try to get these fixed ASAP: 1. Serial console broken on panda es booting with DT The symptoms are dmesg output stopping after few lines and only continuing after pressing a key. Does not seem to happen on blaze with DT for some reason. And does not happen on panda es with legacy booting. 2. MUSB fails with legacy booting and DT on panda es With both legacy and DT booting I get something like: HS USB OTG: no transceiver configured musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 3. DSS fails with DT booting Works with legacy booting but fails with DT. I'm almost certain the DT booting was working last week or so? This is what I now get with DT booting: omapdss DSI error: can't get VDDS_DSI regulator omapdss HDMI error: can't get VDDA_HDMI_DAC regulator omapdss HDMI error: device hdmi init failed: -517 omapdss CORE error: driver probe failed: -22 ... 4. WLAN with wl12xx fails with both legacy and DT booting No real output here with the legacy mode, just the usual using pinctrl dummy state warning. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
