Re: [PATCH 0/3] WLAN support for omap4 when booted with devicetree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2013-04-25 at 20:52 -0700, Tony Lindgren wrote:
> Hi all,

Hi Tony,


> Here are some patches against linux next to make WLAN to work with
> device tree. Note that we still are initializing wl12xx with pdata,
> but so far it looks like only minimal binding for it is needed.

Thanks for doing this! I've been out on vacation for the past 3 weeks,
so I didn't manage to finish the wl12xx DT stuff in time for 3.10. :(


> There are various fixes pending posted recently, but at least the
> fix "[PATCH] mmc: omap_hsmmc: Fix the DT pbias workaround for MMC
> controllers 2 to 5" is needed.

I managed to apply the OMAP2+ and the blaze patches.  There were
conflicts with the panda patch, so I skipped it for now.  I'll come back
to it a bit later.


> Please test on blaze/sdp if you have a chance, I don't have the
> connectivity card on mine.

I tested this on Blaze and it seems to work fine! The driver gets probed
and I can power the chip on and off (by putting the interface up and
down) without any problems. :)

BTW, did you (or anyone else) manage to get ethernet to work on Blaze
(or Panda) with DT?

-- 
Luca.

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux