Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 0/1] i2c: omap: correct usage of the interrupt enable register
  • From: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@xxxxxx>
• [PATCH 1/1] i2c: omap: correct usage of the interrupt enable register
  • From: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@xxxxxx>
• RE: [PATCH 3/3] usb: dwc3: omap Modify dwc3_omap_readl/writel with offsets
  • From: "Cherian, George" <george.cherian@xxxxxx>
• Re: [PATCH 0/3] palmas usb driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v6 1/9] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• RE: [PATCH] arm: omap2: fix AM33xx hwmod infos for UART2
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v2] usb: omap2430: fix memleak in err case
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• Re: [PATCH v2] usb: omap2430: fix memleak in err case
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• [PATCH v2] OMAP: AES: Don't idle/start AES device between Encrypt operations
  • From: Joel A Fernandes <joelagnel@xxxxxx>
• Re: [PATCH v6 1/9] drivers: phy: add generic PHY framework
  • From: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx>
• Re: [PATCH v2 11/14] Documentation: dt: binding: omap: am43x timer
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: timer: initialize before using oh_name
  • From: Jon Hunter <jgchunter@xxxxxxxxx>
• Re: [PATCH v2 11/14] Documentation: dt: binding: omap: am43x timer
  • From: Jon Hunter <jgchunter@xxxxxxxxx>
• Re: [PATCH v2 12/14] Documentation: dt: binding: omap: am43x counter
  • From: Jon Hunter <jgchunter@xxxxxxxxx>
• Re: [PATCH v1 0/3] PM / AVS: SmartReflex: driver misc fixes
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] arm: configs: omap2plus_defconfig: enable USB bits which work
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1 1/3] PM / AVS: SmartReflex: disable errgen before vpbound disable
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Jon Hunter <jgchunter@xxxxxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Jon Hunter <jgchunter@xxxxxxxxx>
• Re: [PATCH] ARM: DTS: OMAP4: Panda/SDP: twl6030: fix mux for IRQ pin and msecure line
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] arm: configs: omap2plus_defconfig: enable USB bits which work
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v2] usb: omap2430: fix memleak in err case
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: musb: fix clock naming
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/3] palmas usb driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] usb: dwc3: omap Modify dwc3_omap_readl/writel with offsets
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: omap2430: fix memleak in err case
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] arm: omap2: fix AM33xx hwmod infos for UART2
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: fix IVA2 module base address
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [net-next PATCH v3 1/6] net: cpsw: enhance pinctrl support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH v2] usb: omap2430: fix memleak in err case
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• [PATCH] ARM: OMAP: fix IVA2 module base address
  • From: Aida Mynzhasova <aida.mynzhasova@xxxxxxxxxx>
• [PATCH v4,2/3] ARM: dts: AM33XX: update GPMC node
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH v4,1/3] ARM: dts: AM33XX: Add ELM node
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH v4,0/3] DT support for NAND on OMAP2
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH v4,3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH] dts: am33xx: Correct properties on gpmc node
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v3 0/5] ARM: dts: OMAP2+: use preprocessor for device trees
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH] dts: am33xx: Correct properties on gpmc node
  • From: Lars Poeschel <larsi@xxxxxxxxxxxxxxxxx>
• OMAP DSS: How to skip FB initialization?
  • From: Sven Brandau <brandau@xxxxxx>
• Re: [PATCH v2] OMAP: AES: Don't idle/start AES device between Encrypt operations
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: musb: fix clock naming
  • From: yegorslists@xxxxxxxxxxxxxx
• Re: [PATCH v6 0/9] Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] ARM: OMAP2+: timer: initialize before using oh_name
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [PATCH v2] usb: dwc3: use extcon fwrk to receive connect/disconnect notification
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] mmc: omap: fix error return code in mmc_omap_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [RFC PATCH 1/4] arm: omap: Add phy binding info for musb in plat data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v6] extcon: Palmas Extcon Driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: use extcon fwrk to receive connect/disconnect notification
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [net-next PATCH v3 1/6] net: cpsw: enhance pinctrl support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3 5/5] ARM: dts: OMAP2+: use pinctrl constants
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v3 4/5] ARM: dts: OMAP2+: header file for pinctrl constants
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v3 3/5] ARM: dts: OMAP4/5: use existing constants for IRQs
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v3 2/5] ARM: dts: OMAP2+: use existing constants for GPIOs
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v3 1/5] ARM: dts: OMAP2+: use #include for all device trees
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v3 0/5] ARM: dts: OMAP2+: use preprocessor for device trees
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v2 01/14] ARM: OMAP2+: separate out OMAP4 restart
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 02/14] ARM: OMAP2+: AM43x: Kconfig
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 04/14] ARM: OMAP2+: AM43x: soc_is support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 06/14] ARM: OMAP2+: AM43x: static mapping
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 08/14] ARM: OMAP2+: AM43x: GP or HS ?
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 07/14] ARM: OMAP2+: AM43x: early init
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 09/14] ARM: OMAP2+: AM43x: SRAM base and size
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 10/14] ARM: OMAP2+: AM43x: basic dt support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 12/14] Documentation: dt: binding: omap: am43x counter
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 14/14] ARM: dts: AM43x: initial support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 13/14] Documentation: dt: binding: serial: omap: am43x
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 11/14] Documentation: dt: binding: omap: am43x timer
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 05/14] ARM: OMAP2+: AM437x: SoC revision detection
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 03/14] ARM: OMAP2+: AM43x: kbuild
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 00/14] ARM: OMAP2+: AM43x initial support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2] usb: dwc3: use extcon fwrk to receive connect/disconnect notification
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6] extcon: Palmas Extcon Driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• RE: [PATCH] ARM: dts: omap2plus: remove interrupt-parent property
  • From: "Vishwanathrao Badarkhe, Manish" <manishv.b@xxxxxx>
• Re: [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH v2 5/5] ARM: dts: OMAP2+: use pinctrl constants
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v1 1/3] PM / AVS: SmartReflex: use omap_sr * for errgen interfaces
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [PATCH v1 3/3] PM / AVS: SmartReflex: use omap_sr * for enable/disable interface
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [PATCH v1 2/3] PM / AVS: SmartReflex: use omap_sr * for minmax interfaces
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [PATCH v1 0/3] PM / AVS: SmartReflex: use omap_sr * for class interfaces
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [PATCH v1 0/3] PM / AVS: SmartReflex: driver misc fixes
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [PATCH v1 1/3] PM / AVS: SmartReflex: disable errgen before vpbound disable
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [PATCH v1 2/3] PM / AVS: SmartReflex: disable runtime PM on driver remove
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• [PATCH v1 3/3] PM / AVS: SmartReflex: fix driver name
  • From: Andrii Tseglytskyi <andrii.tseglytskyi@xxxxxx>
• RE: [PATCH 1/4] usb: dwc3: gadget: free trb pool only from epnum 2
  • From: "Cherian, George" <george.cherian@xxxxxx>
• Re: [PATCH v5 2/3] extcon: Palmas Extcon Driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: omap3-igep0030: Add NAND flash support
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH 1/4] usb: dwc3: gadget: free trb pool only from epnum 2
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: omap3-igep0030: Add NAND flash support
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: omap3-igep0030: Add NAND flash support
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: omap3-igep0030: Add NAND flash support
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 0/3] Adding AM437x support to dwc3-omap glue
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 1/3] usb: dwc3: omap: Adding am437x specific register map changes
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 2/3] usb: dwc3: omap: Intialize the register offset values for OMAP5 and AM437x
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 3/3] usb: dwc3: omap Modify dwc3_omap_readl/writel with offsets
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH v5 2/3] extcon: Palmas Extcon Driver
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH v5 2/3] extcon: Palmas Extcon Driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v5 2/3] extcon: Palmas Extcon Driver
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH v5 2/3] extcon: Palmas Extcon Driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v5 2/3] extcon: Palmas Extcon Driver
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH v5 2/3] extcon: Palmas Extcon Driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v5 2/3] extcon: Palmas Extcon Driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 3/3] usb: dwc3: use extcon fwrk to receive connect/disconnect notification
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v5 2/3] extcon: Palmas Extcon Driver
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 0/3] mmc: omap_hsmmc: fixes for 3.10
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [net-next PATCH v3 2/6] net: davinci_mdio: enhance pinctrl support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v3 5/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v3 3/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v3 4/6] ARM: dts: AM33XX: Add CPSW phy_id device tree data to am335x-evmsk
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v3 6/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v3 1/6] net: cpsw: enhance pinctrl support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v3 0/6] Adding pinctrl PM support for CPSW and MDIO
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH] ARM: DTS: OMAP4: Panda/SDP: twl6030: fix mux for IRQ pin and msecure line
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [net-next PATCH v2 1/6] net: cpsw: enhance pinctrl support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [net-next PATCH v2 1/6] net: cpsw: enhance pinctrl support
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] extcon: Palmas Extcon Driver
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH 1/3] drivers: regulator: palmas: add an API to set/clear the switch bit on SMPS10
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH v2] ARM: DTS: OMAP4: Panda/SDP: twl6030: fix mux for IRQ pin and msecure line
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] ARM: DTS: OMAP4: Panda/SDP: twl6030: fix mux for IRQ pin and msecure line
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] ARM: DTS: OMAP4: Panda/SDP: twl6030: fix mux for IRQ pin and msecure line
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] ARM: DTS: OMAP4: Panda/SDP: twl6030: fix mux for IRQ pin and msecure line
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: DTS: OMAP4: Panda/SDP: twl6030: fix mux for IRQ pin and msecure line
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] ARM: DTS: OMAP4: Panda/SDP: twl6030: fix mux for IRQ pin and msecure line
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: DTS: OMAP4: Panda/SDP: twl6030: fix mux for IRQ pin and msecure line
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] ARM: DTS: OMAP4: Panda/SDP: twl6030: fix mux for IRQ pin and msecure line
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 1/3] drivers: regulator: palmas: add an API to set/clear the switch bit on SMPS10
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] drivers: regulator: palmas: add an API to set/clear the switch bit on SMPS10
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 3/3] usb: dwc3: use extcon fwrk to receive connect/disconnect notification
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 2/3] extcon: Palmas Extcon Driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/3] palmas usb driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] ARM: OMAP2+: omap-usb-host: Fix memory leaks
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/4 v2] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: omap3-igep0020: Add NAND flash support
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• [PATCH 1/1] ARM : omap3 : fix wrong container_of in clock36xx.c
  • From: Jean-Philippe Francois <jp.francois@xxxxxxxxxx>
• [PATCH 0/1] ARM: omap3: Fix regression in dpll4 child clock frequency setting.
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [RESEND PATCH v2 1/3] mmc: omap_hsmmc: Enable SDIO IRQ using a GPIO in idle mode.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [net-next resend PATCH 1/6] net: cpsw: enhance pinctrl support
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Jon Hunter <jgchunter@xxxxxxxxx>
• Re: [PATCH v2 2/5] ARM: dts: OMAP2+: use existing constants for GPIOs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 5/5] ARM: dts: OMAP2+: use pinctrl constants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 06/13] mmc: omap_hsmmc: add dt pbias and control mmc support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 06/13] mmc: omap_hsmmc: add dt pbias and control mmc support
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH] ARM: dts: OMAP4. fix missing omap4-sdp-es23plus.dtb in dtbs target
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v2 3/5] ARM: dts: OMAP4/5: use existing constants for IRQs
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v2 4/5] ARM: dts: OMAP2+: header file for pinctrl constants
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v2 5/5] ARM: dts: OMAP2+: use pinctrl constants
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v2 2/5] ARM: dts: OMAP2+: use existing constants for GPIOs
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v2 1/5] ARM: dts: OMAP2+: use #include for all device trees
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH 1/1] USB: ehci-omap: Reset dma_mask pointer on probe
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [Resend/PATCHv5 0/3] Omap serial cleanup
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 1/1] USB: ehci-omap: Reset dma_mask pointer on probe
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [net-next PATCH v2 3/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v2 5/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v2 4/6] ARM: dts: AM33XX: Add CPSW phy_id device tree data to am335x-evmsk
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v2 6/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v2 2/6] net: davinci_mdio: enhance pinctrl support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v2 1/6] net: cpsw: enhance pinctrl support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH v2 0/6] Adding pinctrl PM support for CPSW and MDIO
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• RE: [net-next resend PATCH 1/6] net: cpsw: enhance pinctrl support
  • From: "Hebbar, Gururaja" <gururaja.hebbar@xxxxxx>
• [PATCH 1/1] USB: ehci-omap: Reset dma_mask pointer on probe
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/1] USB: ehci-omap: Fixes for 3.10
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] OMAPDSS: Fix crash with DT boot
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [net-next resend PATCH 1/6] net: cpsw: enhance pinctrl support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [PATCH] ARM: dts: omap3-devkit8000: fix NAND memory binding
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 2/2] ARM: dts: omap3-overo: add default trigger for TWL4030 LED
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 1/2] ARM: dts: Add omap3-overo NAND flash memory binding
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 0/2] ARM: dts: updates for omap3-overo
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [RFC/RFT] ARM: dts: add minimal DT support for Nokia N950 & N9
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [net-next resend PATCH 1/6] net: cpsw: enhance pinctrl support
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: hwmod/serial: fix DT case
  • From: Olof Johansson <olof@xxxxxxxxx>
• [RFC/RFT] ARM: dts: add minimal DT support for Nokia N950 & N9
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [RFC PATCH 0/4] regulator/OMAP: support VC/VP support in dts
  • From: Nishanth Menon <nm@xxxxxx>
• [RFC PATCH 3/4] PM / AVS: Introduce support for OMAP Voltage Processor(VP) with device tree nodes
  • From: Nishanth Menon <nm@xxxxxx>
• [RFC PATCH 2/4] PM / AVS: Introduce support for OMAP Voltage Controller(VC) with device tree nodes
  • From: Nishanth Menon <nm@xxxxxx>
• [RFC PATCH 1/4] regulator: Introduce OMAP regulator to control PMIC over VC/VP
  • From: Nishanth Menon <nm@xxxxxx>
• [RFC PATCH 4/4] HACK: OMAP4460/TPS/TWL/PandaBoardES - Enable VP regulator for cpufreq
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/5] ARM: dts: OMAP2+: use #include for all device trees
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: OMAP2+: convert DT files to use the new OMAP_GPIO macro
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH 1/5] ARM: dts: OMAP2+: use #include for all device trees
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: dts: OMAP3: fix incorrect notation for musb-hdrc interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: OMAP2+: convert DT files to use the new OMAP_GPIO macro
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH 5/5] ARM: dts: OMAP4/5: use existing constants for IRQs
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 0/5] ARM: dts: OMAP2+: use preprocessor for device trees
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 4/5] ARM: dts: OMAP3: fix incorrect notation for musb-hdrc interrupt
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 3/5] ARM: dts: OMAP2+: convert DT files to use the new OMAP_GPIO macro
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 1/5] ARM: dts: OMAP2+: use #include for all device trees
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH] arm: configs: omap2plus_defconfig: enable USB bits which work
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [PATCH v2] usb: omap2430: fix memleak in err case
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• [PATCH] rtc: rtc-twl: Fix missing device_init_wakeup() when booted with device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [pandaboard] device tree booting fails
  • From: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Jon Hunter <jgchunter@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: hwmod/serial: fix DT case
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.10-rc1
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• Re: the Usage of ROM and RAM of Cortex-M3 on OMAP4
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: [GIT PULL] omap fixes for v3.10-rc1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: the Usage of ROM and RAM of Cortex-M3 on OMAP4
  • From: Nicolas Dechesne <ndec13@xxxxxxxxx>
• [PATCH] arm: omap: board-overo: reset GPIO for SMSC911x
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH 6/6] ARM: OMAP2+: Remove omap4 ocp2scp pdata
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• the Usage of ROM and RAM of Cortex-M3 on OMAP4
  • From: Barry Song <21cnbao@xxxxxxxxx>
• [net-next resend PATCH 0/6] Adding pinctrl PM support for CPSW and MDIO
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next resend PATCH 3/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next resend PATCH 1/6] net: cpsw: enhance pinctrl support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next resend PATCH 2/6] net: davinci_mdio: enhance pinctrl support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next resend PATCH 6/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next resend PATCH 5/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next resend PATCH 4/6] ARM: dts: AM33XX: Add CPSW phy_id device tree data to am335x-evmsk
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: am3517: failed to boot 3.10-rc1
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• Re: [GIT PULL] omap fixes for v3.10-rc1
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] OMAP PM cleanups for v3.10
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v6 0/9] Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 02/19] drivers/usb/host: add missing platform_driver owner
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RESEND PATCH v2 1/3] mmc: omap_hsmmc: Enable SDIO IRQ using a GPIO in idle mode.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/19] drivers/usb/musb: add missing platform_driver owner
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH 04/19] drivers/usb/dwc3: add missing platform_driver owner
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH 02/19] drivers/usb/host: add missing platform_driver owner
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH v2 1/3] mmc: omap_hsmmc: Enable SDIO IRQ using a GPIO in idle mode.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: reset handling in am335x hwmod data
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: reset handling in am335x hwmod data
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH-V2] ARM: OMAP2+: AM33xx: Fix missing reset status data to GFX hwmod
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: reset handling in am335x hwmod data
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix multiple randconfig errors if no SoC is selected, take3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: reset handling in am335x hwmod data
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH-V2] ARM: OMAP2+: AM33xx: Fix missing reset status data to GFX hwmod
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH-V2] ARM: OMAP2+: AM33xx: Fix missing reset status data to GFX hwmod
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V2 2/2] ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V2 1/2] ARM: OMAP AM33XX: clock data: Enable clkout2 as part of init
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V2 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: reset handling in am335x hwmod data
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: reset handling in am335x hwmod data
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH-V2] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH] ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v3 0/6] ARM: OMAP2+: hwmod and SERIAL: Remove sysc handling from driver
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH 2/2] ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH 1/2] ARM: OMAP AM33XX: clock data: Enable clkout2 as part of init
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP AM33XX: clock data: Enable clkout2 as part of init
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL] ARM: OMAP2+: hwmod/serial: fix DT case
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 0/6] ARM: OMAP2+: hwmod and SERIAL: Remove sysc handling from driver
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP baseline test results for v3.10-rc1
  • From: Paul Walmsley <paul@xxxxxxxxx>
• OMAP baseline test results for v3.10-rc1
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 4/4 v2] ARM: OMAP2+: updated ECC scheme attributes for omap2-nand DT
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: v3.10-rc1: backlight brightness after boot on N900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: v3.10-rc1: backlight brightness after boot on N900
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH v2] OMAP: AES: Don't idle/start AES device between Encrypt operations
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Fix multiple randconfig errors if no SoC is selected, take3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: OMAP2+: Remove omap4 ocp2scp pdata
  • From: Felipe Balbi <balbi@xxxxxx>
• [GIT PULL] omap fixes for v3.10-rc1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/6] ARM: OMAP2+: Remove omap4 ocp2scp pdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] ARM: OMAP2+: Remove omap4 pdata for USB
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/6] ARM: OMAP2+: Remove omap4 pdata from hsmmc.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] ARM: OMAP2+: Remove legacy mux data for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] ARM: OMAP2+: Remove board-omap4panda.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/6] Drop legacy booting for omap4 for v3.11, boot with device tree only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: v3.10-rc1: backlight brightness after boot on N900
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• Re: v3.10-rc1: backlight brightness after boot on N900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: v3.10-rc1: backlight brightness after boot on N900
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: reset handling in am335x hwmod data
  • From: Nishanth Menon <nm@xxxxxx>
• Re: reset handling in am335x hwmod data
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH-V2] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: reset handling in am335x hwmod data
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: am3517: failed to boot 3.10-rc1
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] ARM : omap3 : fix wrong container_of in clock36xx.c
  • From: Jean-Philippe Francois <jp.francois@xxxxxxxxxx>
• Re: [PATCH v3 0/6] ARM: OMAP2+: hwmod and SERIAL: Remove sysc handling from driver
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: reset handling in am335x hwmod data
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH] i2c: busses: remove superfluous comment
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: reset handling in am335x hwmod data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Nishanth Menon <nm@xxxxxx>
• [RFC PATCH 4/4] arm: omap: remove using usb_bind_phy for binding musb and phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 3/4] usb: musb: omap: use the new API to get PHY reference by label
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 1/4] arm: omap: Add phy binding info for musb in plat data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 2/4] usb: phy: add a new API to get PHY ref by label
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 4/4 v2] ARM: OMAP2+: updated ECC scheme attributes for omap2-nand DT
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] broken musb on am35xx
  • From: yegorslists@xxxxxxxxxxxxxx
• [PATCH] usb: musb: fix clock naming
  • From: yegorslists@xxxxxxxxxxxxxx
• [PATCH 1/4 v2] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH 3/4 v2] mtd:nand:omap2: updated support for BCH4 ECC scheme
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH 2/4 v2] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH 0/4 v2] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH 4/4 v2] ARM: OMAP2+: updated ECC scheme attributes for omap2-nand DT
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: 3.9 regression : CAM_XCLKA wrong frequency setting.
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• RE: [PATCH] ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 2/2] mfd: twl-core: convert to module_i2c_driver()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• RE: [PATCH-V2] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH] ARM: OMAP3+: am33xx id: Add new am33xx specific function to check dev_feature
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH-V2] ARM: OMAP3+: am33xx id: Add new am33xx specific function to check dev_feature
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH] i2c: busses: remove superfluous comment
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• 3.9 regression : CAM_XCLKA wrong frequency setting.
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH] ARM: OMAP5: select SCU
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 2/2] mfd: twl-core: convert to module_i2c_driver()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] mfd: twl-core: convert to module_i2c_driver()
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH V5 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.9
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 0/6] ARM: OMAP2+: hwmod and SERIAL: Remove sysc handling from driver
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM : omap : remove __init for _enable_preprogram
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: am3517: failed to boot 3.10-rc1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: defconfigs: OMAP: omap2plus_defconfig missing CONFIG_ARCH_MULTI_V6=y
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: fix __init section mismatch for _enable_preprogram
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: fix error return code in omap1_system_dma_init()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V5 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH, v2] ARM: omap2: gpmc: fix compilation warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: usb: musb: Fix LapDock enumeration on omap for boot and slow cable insertion
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP2+: Simplify NAND support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 06/13] mmc: omap_hsmmc: add dt pbias and control mmc support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RFC PATCH v2] ARM: OMAP4+: protect SCU code compilation
  • From: Vincent Stehlé <vincent.stehle@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: Allow NAND transfer mode to be specified in DT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: nand: reorganize gpmc timing values
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: control: add OMAP5 support for dsp boot programming
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [GIT PULL] OMAP PM cleanups for v3.10
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2: remove CONFIG_ARCH_OMAP2PLUS_TYPICAL
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2: remove CONFIG_ARCH_OMAP2PLUS_TYPICAL
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] ARM: omap2: remove CONFIG_ARCH_OMAP2PLUS_TYPICAL
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP5: select SCU
  • From: Vincent Stehlé <v-stehle@xxxxxx>
• Re: [Resned/PATCHv5 0/2] Serial fixes
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [GIT PULL] OMAP PM cleanups for v3.10
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: omap3 : isp clock a : Difference between dmesg frequency and actual frequency with 3.9
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• [PATCH] ARM: omap2: remove CONFIG_ARCH_OMAP2PLUS_TYPICAL
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP5: select SCU
  • From: Vincent Stehlé <v-stehle@xxxxxx>
• Re: [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• Re: omap3 : isp clock a : Difference between dmesg frequency and actual frequency with 3.9
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 25/33] drivers/video/omap2: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 26/33] drivers/video/omap2/dss: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• RE: [PATCH 2/2] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH 2/2] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• Re: omap3 : isp clock a : Difference between dmesg frequency and actual frequency with 3.9
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• Re: omap3 : isp clock a : Difference between dmesg frequency and actual frequency with 3.9
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• RE: [PATCH 2/2] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH 2/2] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• Re: [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 1/2] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH 2/2] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH 0/2] mtd:nand:omap2: ECC support clean-up for omap2-nand driver
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: v3.10-rc1: backlight brightness after boot on N900
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• v3.10-rc1: backlight brightness after boot on N900
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [Resend/PATCHv5 1/3] arm: omap2+: serial: remove no_console_suspend support
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [Resend/PATCHv5 3/3] arm: omap2+: omap_device: remove no_idle_on_suspend
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [Resend/PATCHv5 2/3] arm: dts: am33xx: Remove "ti,no_idle_on_suspend" property.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [Resend/PATCHv5 0/3] Omap serial cleanup
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv5 1/2] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [Resned/PATCHv5 0/2] Serial fixes
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [Resend/PATCHv5 2/2] driver: serial: omap: prevent runtime PM for "no_console_suspend"
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [Resend/PATCHv5 1/2] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v2 0/6] ARM; OMAP2+: hwmod and SERIAL: Remove sysc handling from driver
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCHv2 1/3] arm: introduce config HAS_BANDGAP
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCHv2 2/3] arm: dts: add bandgap entry for OMAP443x devices
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCHv2 0/3] arm: enable TI SoC thermal driver
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: [PATCHv5 1/2] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv5 1/2] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCHv2 0/3] arm: enable TI SoC thermal driver
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCH v3 4/6] ARM: OMAP2+: serial: Remove the un-used slave idle hooks
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 1/6] ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc()
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 0/6] ARM: OMAP2+: hwmod and SERIAL: Remove sysc handling from driver
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 6/6] ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 2/6] ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 5/6] SERIAL: OMAP: Remove the slave idle handling from the driver
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 3/6] ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv5 1/2] driver: tty: serial: Move "uart_console" def to core header file.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: usb: musb: Fix LapDock enumeration on omap for boot and slow cable insertion
  • From: Felipe Balbi <balbi@xxxxxx>
• omap3 : isp clock a : Difference between dmesg frequency and actual frequency with 3.9
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• Re: [PATCH v3 2/3] gpio/omap: modify wake-up register with interrupt enable.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] ARM: OMAP5: select SCU
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v3] ARM:dts:omap4-panda:Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: am3517: failed to boot 3.10-rc1
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• [RESEND PATCH v2 3/3] mmc: omap_hsmmc: add PSTATE to debugfs regs_show.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [RESEND PATCH v2 2/3] mmc: omap_hsmmc: debugfs entries for GPIO mode.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [RESEND PATCH v2 1/3] mmc: omap_hsmmc: Enable SDIO IRQ using a GPIO in idle mode.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [RESEND PATCH v2 0/3] omap_hsmmc: SDIO IRQ on AM335x family
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• Re: am3517: failed to boot 3.10-rc1
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• Re: MTD : cannot reserve enough PEBs for bad PEB handling
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• [PATCH] ARM: dts: omap3 beagle: Add usb otg hs dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3] ARM:dts:omap4-panda:Update the LED support for the panda DTS
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH] ARM: OMAP2+: Allow NAND transfer mode to be specified in DT
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: omap3-isp : panic using previewer from V4L input
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: OMAP baseline test results for v3.9
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.9
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP baseline test results for v3.9
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3 3/3] gpio/omap: split irq_mask callback fucntion into irq_disable/irq_mask.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/3] gpio/omap: modify wake-up register with interrupt enable.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/3] gpio/omap: replace open coded read-modify-write with _gpio_rmw function.
  • From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM : omap : remove __init for _enable_preprogram
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM : omap : remove __init for _enable_preprogram
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH, v2] ARM: omap2: gpmc: fix compilation warning
  • From: Vincent Stehlé <vincent.stehle@xxxxxxxxxxx>
• [PATCH] ARM: OMAP5: select SCU
  • From: Vincent Stehlé <vincent.stehle@xxxxxxxxxxx>
• [PATCH] ARM : omap : remove __init for _enable_preprogram
  • From: jp.francois@xxxxxxxxxx
• [PATCH v3] ARM:dts:omap4-panda:Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2] OMAP: AES: Don't idle/start AES device between Encrypt operations
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] arm: configs: omap2plus_defconfig: enable USB bits which work
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: am3517: failed to boot 3.10-rc1
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• Re: am3517: failed to boot 3.10-rc1
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: dwc3: Fix compilation break when building with USB_DWC3_DUAL_ROLE=y
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH] spi: spi-omap2-mcspi.c: Add dts for slave device configuration.
  • From: Illia Smyrnov <x0194613@xxxxxx>
• am3517: failed to boot 3.10-rc1
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• Re: omap3-isp : panic using previewer from V4L input
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• [PATCH v2] OMAP: AES: Don't idle/start AES device between Encrypt operations
  • From: Joel A Fernandes <joelagnel@xxxxxx>
• RE: [PATCH] OMAP: AES: Don't idle/start AES device between Encrypt operations
  • From: "Fernandes, Joel A" <joelagnel@xxxxxx>
• [PATCH] arm: configs: omap2plus_defconfig: enable USB bits which work
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V5 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3+: am33xx id: Add new am33xx specific function to check dev_feature
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] OMAP: AES: Don't idle/start AES device between Encrypt operations
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• RE: [PATCH] OMAP: AES: Don't idle/start AES device between Encrypt operations
  • From: "Fernandes, Joel A" <joelagnel@xxxxxx>
• Re: omap pm : _enable_preprogram should not be __init ?
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] ARM: defconfigs: OMAP: omap2plus_defconfig missing CONFIG_ARCH_MULTI_V6=y
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] ARM: defconfigs: OMAP: omap2plus_defconfig missing CONFIG_ARCH_MULTI_V6=y
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP: AES: Don't idle/start AES device between Encrypt operations
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH] ARM: OMAP: fix __init section mismatch for _enable_preprogram
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• RE: [PATCH] spi/omap2: Let device core handle pinctrl
  • From: "Hebbar, Gururaja" <gururaja.hebbar@xxxxxx>
• [PATCH] ARM: OMAP: fix error return code in omap1_system_dma_init()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH] OMAP: AES: Don't idle/start AES device between Encrypt operations
  • From: Joel A Fernandes <joelagnel@xxxxxx>
• Re: [RFC 33/42] drivers/video/omap2: don't check resource with devm_ioremap_resource
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [RFC 34/42] drivers/video/omap2/dss: don't check resource with devm_ioremap_resource
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [RFC 09/42] drivers/i2c/busses: don't check resource with devm_ioremap_resource
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH] ARM: dts: Fix musb interrupt for device tree booting
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 2/2] ARM: dts: omap3-igep0030: Add NAND flash support
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: omap3-igep0030: Add NAND flash support
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: omap3-igep0020: Add NAND flash support
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [RFC 38/42] arch/arm/plat-omap: don't check resource with devm_ioremap_resource
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: arch/arm/mach-omap2/id.c - IS_ERR_OR_NULL()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] ARM; OMAP2+: hwmod and SERIAL: Remove sysc handling from driver
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/3] mmc: omap_hsmmc: Fix the DT pbias workaround for MMC controllers 2 to 5
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 0/3] mmc: omap_hsmmc: fixes for 3.10
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 2/3] mmc: omap_hsmmc: convert to dma_request_slave_channel_compat
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 3/3] mmc: omap_hsmmc: Skip platform_get_resource_byname() for dt case
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH] spi/omap2: Let device core handle pinctrl
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: arch/arm/mach-omap2/id.c - IS_ERR_OR_NULL()
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [RFC 09/42] drivers/i2c/busses: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 33/42] drivers/video/omap2: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 34/42] drivers/video/omap2/dss: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 38/42] arch/arm/plat-omap: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [GIT PULL 1/2] omap fixes for v3.10 merge window part2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 2/2] omap device tree fixes for v3.10 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 1/2] omap fixes for v3.10 merge window part2
  • From: Olof Johansson <olof@xxxxxxxxx>
• [GIT PULL 1/2] omap fixes for v3.10 merge window part2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: arch/arm/mach-omap2/id.c - IS_ERR_OR_NULL()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap3430 fails to boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• arch/arm/mach-omap2/id.c - IS_ERR_OR_NULL()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• omap3430 fails to boot
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH] mmc: omap_hsmmc: fix error return code in omap_hsmmc_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• Re: [PATCH v3,2/3] ARM: dts: AM33XX: Add GPMC node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: GPMC fixes for v3.10
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: omap-usb-host: clean up pin mux setup code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: mux: add AM/DM37x gpios
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: omap_device: use late_initcall_sync
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: OMAP36xx/OMAP4460 Fix CPU OPP voltages
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2: gpmc: fix compilation warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Latest build results - errors/warnings - lots of them
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 4430sdp nfsroot broken with ff5c9059
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• OMAP baseline test results for v3.9
  • From: Paul Walmsley <paul@xxxxxxxxx>
• OMAP baseline test results for v3.9-rc8
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [RFC PATCH 2/3] ARM: omap3: Seagate Wireless Plus DT entry
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• [RFC PATCH 3/3] ARM: omap3: wireless plus gpmc wip
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• [RFC PATCH 1/3] ARM: omap3: Seagate Wireless Plus board
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• [PATCH V5 0/6] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V5 6/6] ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V5 5/6] ARM: OMAP2+: AM33XX: add lateinit hook for calling pm late init
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V5 2/6] ARM: dts: OMAP3: add clock nodes for CPU
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V5 1/6] clk: OMAP: introduce device tree binding to kernel clock data
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V5 4/6] ARM: dts: AM33XX: add clock nodes for CPU
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V5 3/6] ARM: dts: OMAP4: add clock nodes for CPU
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] ARM: OMAP3+: am33xx id: Add new am33xx specific function to check dev_feature
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• Re: [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] USB: set device dma_mask without reference to global data
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: set device dma_mask without reference to global data
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: omap_device: use late_initcall_sync
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
• [PATCH RESEND] genirq: add function to get IRQ edge/level flags
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [GIT PULL] Urgent omap timer fix for current merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] Urgent omap timer fix for current merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ti_tscadc: Update with IIO map interface & deal with partial activation
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• Re: [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: [PATCH] ti_tscadc: Update with IIO map interface & deal with partial activation
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] drivers: bus: omap_l3: Conversion to devm_*
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [GIT PULL] Urgent omap timer fix for current merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: omap3-isp : panic using previewer from V4L input
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• [GIT PULL] remoteproc for 3.10
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [GIT PULL] rpmsg for 3.10
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [GIT PULL] hwspinlock for 3.10
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [GIT PULL] Urgent omap timer fix for current merge window
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: omap3-isp : panic using previewer from V4L input
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• RE: [PATCH] spi/omap2: Let device core handle pinctrl
  • From: "Hebbar, Gururaja" <gururaja.hebbar@xxxxxx>
• [PATCH 1/2] ARM: OMAP AM33XX: clock data: Enable clkout2 as part of init
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH 2/2] ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• Re: [PATCH] spi/omap2: Let device core handle pinctrl
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH] spi/omap2: Let device core handle pinctrl
  • From: "Hebbar, Gururaja" <gururaja.hebbar@xxxxxx>
• RE: mach-omap2/timer.c: Bug introduced while merging patch - ff931c82
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [GIT PULL] Urgent omap timer fix for current merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: mach-omap2/timer.c: Bug introduced while merging patch - ff931c82
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Removing vestiges of CONFIG_USB_SUSPEND
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [RESEND][PATCH 2/3] arm: dts: add bandgap entry for OMAP443x devices
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [RESEND][PATCH 3/3] arm: add bandgap entry for OMAP4460 devices
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [RESEND][PATCH 0/3] arm: enable TI SoC thermal driver
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• [PATCH] spi/omap2: Let device core handle pinctrl
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: mach-omap2/timer.c: Bug introduced while merging patch - ff931c82
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] ti_tscadc: Update with IIO map interface & deal with partial activation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] ARM: omap2: gpmc: fix compilation warning
  • From: Vincent Stehlé <vincent.stehle@xxxxxxxxxxx>
• Re: mach-omap2/timer.c: Bug introduced while merging patch - ff931c82
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] iio: adc: ti_am335x_adc: revert info_mask removal
  • From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
• [PATCH 2/2] iio: adc: ti_am335x_adc: make tiadc_read_raw() more robust
  • From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
• Re: [PATCH] ti_tscadc: Update with IIO map interface & deal with partial activation
  • From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP4+: remove multimedia carveouts
  • From: Benoit Cousson <b-cousson@xxxxxx>
• mach-omap2/timer.c: Bug introduced while merging patch - ff931c82
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: Latest build results - errors/warnings - lots of them
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH] ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• Re: usb: musb: Fix LapDock enumeration on omap for boot and slow cable insertion
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• usb: musb: Fix LapDock enumeration on omap for boot and slow cable insertion
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] mailbox driver framework for v3.10 merge window
  • From: Suman Anna <s-anna@xxxxxx>
• omap pm : _enable_preprogram should not be __init ?
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] mailbox driver framework for v3.10 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] mailbox driver framework for v3.10 merge window
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] mailbox driver framework for v3.10 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 1/5] regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver
  • From: Nishanth Menon <nm@xxxxxx>
• Questions on Slimbus on OMAP4460 PandaboardES
  • From: Jason Zhu <jzhu@xxxxxxxxx>
• Re: [net-next PATCH 0/6] Adding pinctrl PM support for CPSW and Davinci MDIO drivers
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH v3 1/5] regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [net-next PATCH 0/6] Adding pinctrl PM support for CPSW and Davinci MDIO drivers
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [net-next PATCH 1/6] net: cpsw: enhance pinctrl support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 3/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 4/6] ARM: dts: AM33XX: Add CPSW phy_id device tree data to am335x-evmsk
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 6/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 5/6] ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 2/6] net: davinci_mdio: enhance pinctrl support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 0/6] Adding pinctrl PM support for CPSW and Davinci MDIO drivers
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT PULL] mailbox driver framework for v3.10 merge window
  • From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [GIT PULL] mailbox driver framework for v3.10 merge window
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [net-next PATCH 1/1] drivers: net: cpsw: irq not disabled in cpsw isr in particular sequence
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Latest build results - errors/warnings - lots of them
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Latest build results - errors/warnings - lots of them
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: Latest build results - errors/warnings - lots of them
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: Latest build results - errors/warnings - lots of them
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Latest build results - errors/warnings - lots of them
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v3 4/5] ARM: dts: OMAP4460: Add device nodes for ABB
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v3 2/5] ARM: dts: OMAP36xx: Add device node for ABB
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v3 0/5] regulator/OMAP: Support TI Adaptive Body Bias(ABB) on-chip LDO driver
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v3 5/5] ARM: dts: OMAP5: Add device nodes for ABB
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v3 1/5] regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v3 3/5] ARM: dts: OMAP443x: Add device nodes for ABB
  • From: Nishanth Menon <nm@xxxxxx>
• Re: Latest build results - errors/warnings - lots of them
  • From: Eduardo Valentin <eduardo.valentin@xxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Felipe Balbi <balbi@xxxxxx>
• Re[2]: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• Re: [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] ARM: OMAP-USB: Fix possible memory leak
  • From: Alexander Shiyan <shc_work@xxxxxxx>