The UART2 hwmod structure is pointing to the EDMA channels of UART1,
which doesn't look right. This patch fixes this by making the UART2
hwmod structure to a new structure that lists the EDMA channels to be
used by the UART2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 01d8f32..9113251 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -2006,6 +2006,13 @@ static struct omap_hwmod am33xx_uart1_hwmod = {
},
};
+/* uart2 */
+static struct omap_hwmod_dma_info uart2_edma_reqs[] = {
+ { .name = "tx", .dma_req = 28, },
+ { .name = "rx", .dma_req = 29, },
+ { .dma_req = -1 }
+};
+
static struct omap_hwmod_irq_info am33xx_uart2_irqs[] = {
{ .irq = 73 + OMAP_INTC_START, },
{ .irq = -1 },
@@ -2016,7 +2023,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = {
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
.mpu_irqs = am33xx_uart2_irqs,
- .sdma_reqs = uart1_edma_reqs,
+ .sdma_reqs = uart2_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
.prcm = {
.omap4 = {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
