On Mon, May 20, 2013 at 10:46:21AM -0700, Tony Lindgren wrote:
> * Tony Lindgren <tony@xxxxxxxxxxx> [130516 14:50]:
> > * Aaro Koskinen <aaro.koskinen@xxxxxx> [130516 14:05]:
> > > On Thu, May 16, 2013 at 11:09:34AM -0700, Tony Lindgren wrote:
> > > > * Aaro Koskinen <aaro.koskinen@xxxxxx> [130513 13:58]:
> > > > > I tested 3.10-rc1 on OMAP1 / Nokia 770, and Retu MFD probe is broken:
> > > > >
> > > > > [ 2.264221] retu-mfd 2-0001: Retu v3.2 found
> > > > > [ 2.281951] retu-mfd 2-0001: Failed to allocate IRQs: -12
> > > > > [ 2.300140] retu-mfd: probe of 2-0001 failed with error -12
> > > > >
> > > > > The error is coming from regmap code. According to git bisect, it is
> > > > > caused by:
> > > > >
> > > > > commit ede4d7a5b9835510fd1f724367f68d2fa4128453
> > > > > Author: Jon Hunter <jon-hunter@xxxxxx>
> > > > > Date: Fri Mar 1 11:22:47 2013 -0600
> > > > >
> > > > > gpio/omap: convert gpio irq domain to linear mapping
> > > > >
> > > > > The commit does not anymore revert cleanly, and I haven't yet tried
> > > > > crafting a manual revert, so any fix proposals/ideas are welcome...
> > > >
> > > > Hmm this might be a bit trickier to fix. Obviously the real solution
> > > > is to convert omap1 to SPARSE_IRQ like we did for omap2+.
> > > >
> > > > For the -rc cycle, it might be possible to fix this by adding a
> > > > different irq_to_gpio() and gpio_to_irq() functions for omap1.
> > >
> > > The commit reverts cleanly if we also revert
> > > 3513cdeccc647d41c4a9ff923af17deaaac04a66 (gpio/omap: optimise interrupt
> > > service routine), which seems to be just some minor optimization. The
> > > result is below, and with it 770 works again.
> >
> > Hmm in this case it seems that we should just fix it rather than go back
> > to the old code, so let's take a look at that first.
>
> Does the following fix it for you or do we need to fix something else
> there too?
Thanks, that fixes Retu probe on 770.
Tested-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
A.
> --- a/drivers/gpio/gpio-omap.c
> +++ b/drivers/gpio/gpio-omap.c
> @@ -1094,6 +1094,7 @@ static int omap_gpio_probe(struct platform_device *pdev)
> const struct omap_gpio_platform_data *pdata;
> struct resource *res;
> struct gpio_bank *bank;
> + int irq_base;
>
> match = of_match_device(of_match_ptr(omap_gpio_match), dev);
>
> @@ -1135,11 +1136,23 @@ static int omap_gpio_probe(struct platform_device *pdev)
> pdata->get_context_loss_count;
> }
>
> -
> - bank->domain = irq_domain_add_linear(node, bank->width,
> - &irq_domain_simple_ops, NULL);
> - if (!bank->domain)
> + /*
> + * REVISIT: Once we have omap1 supporting SPARSE_IRQ, we can drop
> + * irq_alloc_descs() and irq_domain_add_legacy() and just do:
> + *
> + * bank->domain = irq_domain_add_linear(node, bank->width,
> + * &irq_domain_simple_ops, NULL);
> + * if (!bank->domain)
> + * return -ENODEV;
> + */
> + irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
> + if (irq_base < 0) {
> + dev_err(dev, "Couldn't allocate IRQ numbers\n");
> return -ENODEV;
> + }
> +
> + bank->domain = irq_domain_add_legacy(node, bank->width, irq_base,
> + 0, &irq_domain_simple_ops, NULL);
>
> if (bank->regs->set_dataout && bank->regs->clr_dataout)
> bank->set_dataout = _set_gpio_dataout_reg;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
