Hi, I am working on a dm3730 based camera. The sensor input clock is provided by the cpu via the CAM_XCLK pin. Here is the corresponding log : [ 9.115966] Entering cam_set_xclk [ 9.119781] omap3isp omap3isp: isp_set_xclk(): cam_xclka set to 24685714 Hz [ 9.121337] ov10x33 1-0010: sensor id : 0xa630 [ 10.293640] Entering cam_set_xclk [ 10.297149] omap3isp omap3isp: isp_set_xclk(): cam_xclka set to 0 Hz [ 10.393920] Entering cam_set_xclk [ 10.397979] omap3isp omap3isp: isp_set_xclk(): cam_xclka set to 24685714 Hz However, when mesured on the actual pin, the frequency is around 30 MHz The crystal clock is 19.2 MHz All this was correct with 3.6.11. Jean-Philippe Francois -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
